Rogue bot - AutoIt menu

These ads disappear when you log in.

Results 1 to 12 of 12
  1. #1
    Hounro's Avatar Active Member
    Reputation
    41
    Join Date
    May 2006
    Posts
    326
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Rogue bot - AutoIt

    Here are the main functions the bot performs:

    1) Makes sure you're all healed up (or mostly healed)

    2) Runs around in a circle tabbing for monsties

    3) Once it finds one, he stops and throws a knife then waits a few secs for the monstie to run to him

    4) Uses SS/Evis. to kick the mob's ass until it is dead

    5) Equips new throwing knives when you run out (so you can do more than 200 runs at a time)



    ----------

    So here's the code:
    Code:
    ----------
    
    Dim $Botting=0
    
    Dim $Walking=0
    
    
    
    $Start=IniRead("config_rogue.ini","Whatevs","StartMe","0")
    
    $Stop=IniRead("config_rogue.ini","Whatevs","StopMe","0")
    
    $mx=IniRead("config_rogue.ini","Whatevs","MonsterPixelX","0")
    
    $my=IniRead("config_rogue.ini","Whatevs","MonsterPixelY","0")
    
    $mph=IniRead("config_rogue.ini","Whatevs","MonsterPixelHex","0")
    
    $num=IniRead("config_rogue.ini","Whatevs","NumThrowStacks","0")
    
    $mdx=IniRead("config_rogue.ini","Whatevs","MonsterDetectX","0")
    
    $mdy=IniRead("config_rogue.ini","Whatevs","MonsterDetectY","0")
    
    $mdh=IniRead("config_rogue.ini","Whatevs","MonsterDetectHex","0")
    
    $Heal=IniRead("config_rogue.ini","Heal","UseHeal","0")
    
    $hx=IniRead("config_rogue.ini","Heal","HealPixelX","0")
    
    $hy=IniRead("config_rogue.ini","Heal","HealPixelY","0")
    
    $hph=IniRead("config_rogue.ini","Heal","HealPixelHex","0")
    
    $Attack1=IniRead("config_rogue.ini","Attack","Attack1","0")
    
    $Attack2=IniRead("config_rogue.ini","Attack","Attack2","0")
    
    $AttackThrow=IniRead("config_rogue.ini","Attack","AttackThrow","0")
    
    $Sleep1=IniRead("config_rogue.ini","Attack","Sleep","0")
    
    $SleepAfterThrow=IniRead("config_rogue.ini","Attack","SleepAfterThrow","0")
    
    
    
    HotkeySet("{F8}","Debug")
    
    HotkeySet("{" & $Start & "}","StartBot")
    
    HotkeySet("{" & $Stop & "}","StopBot")
    
    HotkeySet("{F7}","Ex")
    
    
    
    ;----------------------- Main code ---------------------------------------
    
    $n = 0
    
    While $n <= $num
    
    
    
    $i = 0
    
    While $i<200
    
    If $Botting=1 Then
    
    While NOT hex(PixelGetColor($hx,$hy),6)=$hph
    
    Sleep(200)
    
    WEnd
    
    
    
    Do
    
    If $Botting=1 Then
    
    Walk()
    
    Send("{TAB}")
    
    EndIf
    
    Until hex(PixelGetColor($mx,$my),6)=$mph
    
    
    
    If $Botting=1 Then
    
    
    
    Attack()
    
    EndIf
    
    Else
    
    $i=0
    
    EndIf
    
    $i=$i+1
    
    WEnd
    
    
    
    $n=$n+1
    
    Equip()
    
    
    
    WEnd
    
    ;---------------------------------------------------------------------------
    
    
    
    
    
    Func Walk()
    
    If NOT $walking Then
    
    send("{NUMLOCK toggle}")
    
    $walking=1
    
    EndIf
    
    MouseClickDrag("right",187,387,390,317,10)
    
    send("{UP}")
    
    $walking=0
    
    sleep(160+random(40))
    
    EndFunc
    
    
    
    
    
    Func Attack()
    
    If $walking Then
    
    send("{UP}");
    
    $walking=0
    
    EndIf
    
    If hex(PixelGetColor($mx,$my),6)=$mph THEN
    
    Send($AttackThrow)
    
    Sleep($SleepAfterThrow)
    
    While hex(PixelGetColor($mx,$my),6)=$mph
    
    Send($Attack1)
    
    Sleep($Sleep1)
    
    WEnd
    
    Sleep($Sleep1)
    
    Sleep($Sleep1)
    
    Sleep($Sleep1)
    
    Sleep($Sleep1)
    
    Send($Attack2)
    
    While hex(PixelGetColor($mdx,$mdy),6)=$mdh
    
    Sleep($Sleep1)
    
    Send($Attack1)
    
    WEnd
    
    EndIf
    
    EndFunc
    
    
    
    Func Equip()
    
    Send("b")
    
    Sleep(200)
    
    Send("c")
    
    Sleep(200)
    
    If $n=1 Then
    
    MouseClick("left", 683, 445)
    
    Sleep(200)
    
    MouseClick("left", 179, 423)
    
    EndIf
    
    If $n=2 Then
    
    MouseClick("left", 716, 445)
    
    Sleep(200)
    
    MouseClick("left", 179, 423)
    
    EndIf
    
    If $n=3 Then
    
    MouseClick("left", 748, 445)
    
    Sleep(200)
    
    MouseClick("left", 179, 423)
    
    EndIf
    
    If $n=4 Then
    
    MouseClick("left", 782, 445)
    
    Sleep(200)
    
    MouseClick("left", 179, 423)
    
    EndIf
    
    Sleep(200)
    
    Send("{ESC}")
    
    Sleep(200)
    
    EndFunc
    
    
    
    
    
    Func StartBot()
    
    $Botting=1
    
    EndFunc
    
    
    
    Func StopBot()
    
    $Botting=0
    
    If $walking Then
    
    send("{UP}")
    
    $walking=0
    
    EndIf
    
    EndFunc
    
    
    
    Func Ex()
    
    ProcessClose("bot_rogue.exe")
    
    EndFunc
    
    
    
    Func Debug()
    
    $pos = MouseGetPos()
    
    MsgBox(0, "Debug", "MonsterPixelHex: " & hex(PixelGetColor($mx,$my),6) & " HealPixelHex: " &
    
    
    
    hex(PixelGetColor($hx,$hy),6) & " X: " & $pos[0] & " Y: " & $pos[1] & " Hex: " &
    
    
    
    hex(PixelGetColor($pos[0],$pos[1]),6))
    
    EndFunc

    ----------

    And this is my config_rogue.ini :

    ----------



    Code:
    [Whatevs]
    
    StartMe=F5
    
    StopMe=F6
    
    MonsterPixelX=229
    
    MonsterPixelY=69
    
    MonsterPixelHex=00AF00
    
    MonsterDetectX=205
    
    MonsterDetectY=69
    
    MonsterDetectHex=007800
    
    NumThrowStacks=1
    
    
    
    [Heal]
    
    UseHeal=1
    
    HealPixelX=138
    
    HealPixelY=69
    
    HealPixelHex=00CD00
    
    
    
    [Attack]
    
    Attack1="1"
    
    Attack2="2"
    
    Sleep1=200
    
    AttackThrow="7"
    
    SleepAfterThrow=2000
    
    
    
    ----------
    Now to the explanation. I blocked in the "main code" section, so all the other functions are called either by hotkeys or by that code. To start the bot, just load it up while in an area with monsters and press F5. F6 stops the bot. Oh and I put an emergency exit hotkey (F7) in case anything goes terrribly wrong and the bot starts eating babies or something similar.



    Also, let me point out that the HEX of the pixels, and maybe even the pixels themselves (the numerical values) will probably be different for you. You will have the find these yourself, but it should be easy because I have put in a function that will display the hex of the coordinates you put in for MonsterPixelX/Y, MonsterDetectX/Y, and HealPixelX/Y. In addition, this function will display the current corrdinates of the mouse, as well as the hex for that position. The hotkey is F8 for this.



    So now I'm going to explain that the variables in the config_rogue.ini are. StartMe and StopMe are obviously the start and stop bot hotkeys. MonsterPixelX, MonsterPixelY, and MonsterPixelHex are the coordinates of the life bar of a monster at around 25% health and the hex associated with that. This is used to detect WHEN to use Eviscerate. MonsterDetectX, MonsterDetectY, and MonsterDetectHex are the coordinates and hex of the monster at the very far left side of the life bar (basically 0 life). This is used to detect WHEN the monster is dead. UseHeal is obvious. HealPixelX, HealPixelY, and HealPixelHex are the coords and hex of YOUR life at whatever health you want to heal to before you go fight another monstie. Just compile the bot like it is, run it, and press F8 over these spots and change the .ini accordingly. Oh, and as for the attack variables.... Attack1 is my SS, Attack2 is my Eviscerate, Sleep is the wait in ms between the attacks, AttackThrow is obviously the number that the knife is set on, and SleepAfterThrow gives the monster time to run up to you once you piss it off. I forgot about one variable, NumThrowStacks. This is how many throw stacks you have IN YOUR BACKPACK. With the way I have it right now, you can have up to 4 extras, starting from the TOP LEFT and filling in the row. Of course, by looking at the code you will be able to see it'll be super-easy to change it if you want.



    And here's a little rundown of the bot code: First, it sleeps while your health is lower than the health you set. It's for a rogue, and since my rogue doesn't use food I didn't add it. It would take a whole LINE of code to add a feeding function if you wanted (or a stealth, which would be smart and I was too lazy to do). If you use stealth while healing, make sure to unstealth right after the While loop ends. Ok, next the bot walks then presses TAB until a monstie is found. Once it finds the guy, the attack function is called (mine worked for me, but it should be easy to change should you need to). Also, after 200 mobs have been killed, the bot calls the equip function to equip a new stack of knives to pull with. It's easy to tell what the function does if you check it out.



    Ok... I'm almost done. Let me point out, though, that I know if another mob starts attacking you and you kill the other one you're on, you'll just sit there until you die because the heal process will never finish. Also, I know this bot doesn't loot. I didn't feel like writing a looting function because I am just interested in leveling. If someone wants to throw a looting function in there that would be great, just stick it after Attack() or something. Somebody can also throw a little "vanish" feature in there if your life gets too low, that way you will most likely not die in the span of a few hours. One more potential bug: If a monster is ranged, it will not run up to you (DUH!) so you would just stand there wanking yourself. Someone can also add a detection for that and have the rogue walk up if needed.



    So finally, if you have never used AutoIt don't be scared. Three days ago I had never looked at AutoIt code before. It's a very easy scripting language to learn. Go here for a download of it (this will also compile the .au3 file to a .exe so you can run it): http://www.hiddensoft.com/autoit3/downloads.php


    Source: PMG

    NOTE: I havent tested yet
    Last edited by Hounro; 12-03-2006 at 07:40 AM.

    These ads disappear when you log in.

  2. #2
    ragingazn628's Avatar Master Sergeant
    Reputation
    21
    Join Date
    Sep 2006
    Posts
    90
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    you made this urself if so.. grats +rep... but does this works?

  3. #3
    Hounro's Avatar Active Member
    Reputation
    41
    Join Date
    May 2006
    Posts
    326
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    havent got time to try it out yet since im doing a hunter whit out any hacks/bots, and my cridit card is denied (still wating for a new one from bank)

  4. #4
    JoeRodge's Avatar Banned
    Reputation
    4
    Join Date
    Nov 2006
    Posts
    129
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    I turn this on and my character runs around randomly, looking toward the sky.


    Maybe you can explain the monster pixel hex a bit better.
    Last edited by JoeRodge; 12-03-2006 at 09:59 AM.

  5. #5
    Ced's Avatar Contributor
    Reputation
    114
    Join Date
    May 2006
    Posts
    555
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    I already posted this but nice..

    No, he did not make it, its from PMG.

  6. #6
    Hounro's Avatar Active Member
    Reputation
    41
    Join Date
    May 2006
    Posts
    326
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    Originally Posted by Proflax
    I already posted this but nice..

    No, he did not make it, its from PMG.
    yes i got from proflax/pmg and i know that pmg is totaly outdated, but i didt think it wloud be outdated since its a autoit bot, sure you have it setted up the right way as told in the post above?

  7. #7
    piemonkey997's Avatar Private
    Reputation
    1
    Join Date
    Aug 2006
    Posts
    1
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    I downloaded AutoIt but i dont know how to save the code or make it work in WoW. How do i do it?

  8. #8
    Hounro's Avatar Active Member
    Reputation
    41
    Join Date
    May 2006
    Posts
    326
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    PMG IS OUTDATED :P just didt expect this bot to be, but what ever ;P

  9. #9
    koraff's Avatar Master Sergeant
    Reputation
    7
    Join Date
    Oct 2006
    Posts
    79
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    OK so call me a noob but what do you do with that code too long to fit as a macro obviously so... hows it work /sigh I feel like such an idiot :*(
    Twinking is a form of cheating NERF ALL TWINKS...cept mine of course ;D

  10. #10
    SneekyFeet's Avatar Private
    Reputation
    1
    Join Date
    Dec 2006
    Posts
    1
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    I know this is kind of stupid but can it get you banned

  11. #11
    slasherxc5's Avatar Private
    Reputation
    1
    Join Date
    Dec 2006
    Posts
    2
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    Wow man, + rep especially with making this on your own, way to go
    When did I realize I was God? Well, I was praying and I suddenly realized I was talking to myself.

  12. #12
    Flying Piggy's Avatar Banned
    Reputation
    1168
    Join Date
    Jan 2007
    Posts
    2,288
    Thanks G/R
    0/4
    Trade Feedback
    0 (0%)

    Re: Rogue bot - AutoIt

    In answer to your question

    I know this is kind of stupid but can it get you banned
    YES , autoit is old news now and it has no way of hidding from warden so YES again you can and will get banned for using this 100% guranteed .
    Sorry to say this even if i thought that the scripting job is very well done but there you have it .

Similar Threads

  1. Iskatu farm bot - Autoit 1280*1024
    By Stylerrr in forum Diablo 3 Bots and Programs
    Replies: 4
    Last Post: 06-15-2012, 06:23 PM
  2. Anti-AFK Honor Leech Bot (AutoIt)
    By Subset in forum World of Warcraft Bots and Programs
    Replies: 153
    Last Post: 09-17-2010, 05:19 AM
  3. [Bot] Not Exactly A Bot(AutoIt)
    By burningsouls in forum World of Warcraft Bots and Programs
    Replies: 2
    Last Post: 09-06-2010, 10:14 PM
  4. Rogue Bot?
    By Ced in forum World of Warcraft General
    Replies: 2
    Last Post: 12-03-2006, 10:50 AM
All times are GMT -5. The time now is 01:07 PM. Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved. Digital Point modules: Sphinx-based search