Mac Can't Log In D3 Beta Please help!!

[12345name]

whyy is it not working?

[12345name]

i am tryin to explain my situation but it i am limited by the number of urls as i am a new member but even when i delete them it still doesn't work. shit forum?

[12345name]

i'll just make loads of posts, made this will do it.

So I downloaded the beta, followed the instructions from wiki moeege and installed monodevelop, done the steps but when I get in and try to log in I get "Logon Failed. Please try again. (Error 6)".

[12345name]

i'll just make loads of posts, maybe this will do it.

So I downloaded the beta, followed the instructions from wiki moeege and installed monodevelop, done the steps but when I get in and try to log in I get "Logon Failed. Please try again. (Error 6)".

The instructions were from 'wiki dot moeege dot org slash compiling'.

I have some screenshots:

'http: double slash imageshack dot us slash g slash 401 slash screenshot 20120329at003 dot png'

If i try to log in with "test@" as username it just stops working, the log in button stays grey. If I try with any other account in the [email protected] format whereas - = character/s it give me the error.


From the above guide I did not understand this part:

[12345name]

blbabal mmaybe after 5 i will be able to do it

[12345name]

So I downloaded the beta, followed the instructions from wiki moeege and installed monodevelop, done the steps but when I get in and try to log in I get "Logon Failed. Please try again. (Error 6)".

These are some screenshots.

ImageShack Album - 3 images

o/

If i try to log in with "test@" as username it just stops working, the log in button stays grey. If I try with any other account in the [email protected] format whereas - = character/s it give me the error suggested above (Error 6).

From the above guide I did not understand this part:

"Sadly even with OSX 10.7.3 Apple didn't update libssl and libcrypto. The easiest way to get the latest
libssl.1.0.0.dylib and libcrypto.1.0.0.dylib is by installing them over MacPorts. Once you've installed
those libs, you need to tell Mono where to find it. Easiest way to do that is by editing
ManagedOpenSsl.dll.config from within Mono:
* <configuration>
* <dllmap os="osx" dll="libeay32" target="/opt/local/lib/libcrypto.1.0.0.dylib"/>
* <dllmap os="osx" dll="ssleay32" target="/opt/local/lib/libssl.1.0.0.dylib"/>
* <dllmap os="!windows,osx" dll="libeay32" target="libcrypto.so.1.0.0"/>
* <dllmap os="!windows,osx" dll="ssleay32" target="libssl.so.1.0.0"/>
* </configuration>"

When I tried to install MacPorts I was unable to do it getting the following error:
"Xcode is not installed, or was installed with unix development (10.5+) or Command line support (10.4) deselected."

I have a MacBook Pro 13''
Verson 10.6.8
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz

Any help would be much appreciated.
I do not understand much of open-source software and this type of emulators, nor macport and everything else I'm dealing with :].

[ThatRed]

Hello 12345name,

Diablo 3 Beta with patch 15 on OSX does not work with mooege at the moment. They do not have any OSX developers.

I tried to answer more but the forum does complain about forbidden words and I do not know what I am doing wrong...

Regards,
Red

[12345name]

Ohhhh, I see. I appreciate the response Red.

Do u know if they are working on it or have any intentions of doing it? If so, could you please tell me where should I look for more info about this?

Cheers

[ThatRed]

Well, you could check the mooege.org (developer) forum. I think they have some ideas.

If you want to compile your own mooege server, you need to install Xcode and the command line tools (preferences, download) for snow leopard. Check your manufacturer (fun fact: it is not allowed to write the name... *facepalm*) dvds. The version in the appstore is for lion only. Than you can install macports. On their site is a guide how to install Xcode, too. After that open terminal and type: sudo port install openssl. Now you can use mono develop to compile the server. I hope I haven't forgotten anything...

You can compile by command line, but you have to replace the build-mono.sh, I think I found that on mooege.org forum:

#!/bin/bash
# Replaces mixed-mode SQLite path with managed path for Mono Linux/MacOS users

function readlink_f () {(cd "$0" && echo "$(pwd)")}

SCRIPT=readlink_f
SCRIPTPATH=`dirname $SCRIPT`
echo $SCRIPTPATH

sed -e 's/dep\\sqlite\\sqlite-mixed/dep\\sqlite\\sqlite-managed/g' $SCRIPTPATH/../src/Mooege/Mooege-VS2010.csproj > $SCRIPTPATH/../src/Mooege/Mooege-Mono.csproj

xbuild $SCRIPTPATH/Mooege-Mono.sln

I found out that the server will crash if you use the option lazy loading=false in config.ini. By the way after compilation you can start the server with the following command: mono mooege.exe in a terminal session. An other thing if you want to add user accounts on the mooege server command line, do not use upper case letters: ThatRed@ will not work, but thatred@ will.

Regards,
Red.

[12345name]

Thanks for everything mate!
And yeah, this forum needs some serious check upon.

[ThatRed]

No problem. Just in case you haven't noticed, I edited a bit while you answered...

[12345name]

I have installed xcode, macports, openssl and replaced build-mono.sh.

When I try to log in the button stays clicked and nothing else happens.

Here is the code, hopefully it will help:

[Trace] [MooNetServer]: MooNet-Client connected: 127.0.0.1:53932
[Trace] [ConnectionService]: Connect()
[Trace] [ConnectionService]: Bind(): { Client: ?? }
[Trace] [ConnectionService]: [export] Hash: 0xB732DB32 Id: 0x10 Service: ChannelService
[Trace] [ConnectionService]: [export] Hash: 0xFA0796FF Id: 0x0B Service: PresenceService
[Trace] [ConnectionService]: [import] Hash: 0xBF8C8094 Id: 0x01
[Trace] [ConnectionService]: Bind(): { Client: ?? }
[Trace] [ConnectionService]: [export] Hash: 0x0DECFC01 Id: 0x01 Service: AuthenticationService
[Trace] [ConnectionService]: [import] Hash: 0x71240E35 Id: 0x02
[Trace] [ConnectionService]: Bind(): { Client: ?? }
[Trace] [ConnectionService]: [export] Hash: 0x43487D3D Id: 0x20 Service: AchievementService
[Trace] [ConnectionService]: [import] Hash: 0xD4DCD093 Id: 0x03
[Trace] [ConnectionService]: Bind(): { Client: ?? }
[Trace] [ConnectionService]: [export] Hash: 0xDBBF6F19 Id: 0x63 Service: ReportService
[Trace] [ConnectionService]: [import] Hash: 0xBBDA171F Id: 0x04
[Trace] [ConnectionService]: Bind(): { Client: ?? }
[Trace] [ConnectionService]: [export] Hash: 0x7CAF61C9 Id: 0x64 Service: N/A
[Trace] [AuthenticationService]: LogonRequest(): [email protected]
[Trace] [VersionChecker]: Client Info: user: [email protected] program: D3 platform: Mac locale: enUS version: 8896 [Aurora bcd3e50524_public/329 (Mar 14 2012 10:11:21)] app_version: 8896.
[Trace] [MooNetClient]: [RPC: { Client: ?? }] Method: Void <>m__8B() Target: N/A


Someone on mooege just told me it doesn't work on macs. So i've been struggling for nothing this entire time... wow

[ThatRed]

Welcome to the club! (sorry if I had mislead you in some way.)

I told you so in my first post. See it as a learning adventure. I am sure that they find a solution, read what d3inferno.com had posted on the developer forum at mooege.org. So there could be hope in the end. If you want to test it now, you can use bootcamp with windows 7. My intention was to test if d3 is working on my macbook pro under osx. I have to wait...

Regards.

[wetwlly]

There's a probable two ways. Virtual Machine diablo or learn how to understand ifconfig on Mac OSX. I have no idea how to use it but I figured it was the same as Microsoft Loopback Adapter. Which if you read the Mooege Developer Discussion Forums you can see that you can set the adapter in microsoft to Blizz's IP address which bypass the thumbprint which I assume ifConfig does the same.

[12345name]

There's a probable two ways. Virtual Machine diablo or learn how to understand ifconfig on Mac OSX. I have no idea how to use it but I figured it was the same as Microsoft Loopback Adapter. Which if you read the Mooege Developer Discussion Forums you can see that you can set the adapter in microsoft to Blizz's IP address which bypass the thumbprint which I assume ifConfig does the same.

Red would you want to give it a try? I'm not really sure if I could manage to do that. I'm pretty much a beginner. Was trying to install Wine earlier which could be another solution but I can't make terminal work ^_^