Get Your Server Public With Out hamachi

[Xtinction]

Step One

The first thing you need to do is make a DNS for your server. This will hide your server's IP address in a sub domain, for example, if my server's IP address was 11.111.11.111, I could make a DNS so that my server could be accessed through darkvirus.servegame.org. You can skip this step if you want but it is not recommended, if you decide to skip it, your server will be located at your IP address.
Go to DynDNS: Dynamic DNS, E-Mail Delivery and Other Services and create an account. Then Go To My Hosts. Then Create A Host
Wildcard Must be Enabled And Where It Says put Your IP Click That Blue Thing Under it.


Step Two

This Is Where You MUST Forward Your Ports

To Forward Your Ports You Must Know How To Access Your Router.

You Need To Foward These Ports

8129
8093
3724
3727
80

Make It With Both TCP and UDP

Step Number Three

Go To Run And Delete CMD And Copy And Paste C:/windows/system32/drivers/etc/hosts In Their

When You Get in the Folder Open Hosts( You need To Be On You Admin Account For Your PC To Access It And Change It Around.

The File Will look Like This

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1

Change It To This

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 Your DNS
(Put Your Internal IP here With Out The Parentheses) Your DNS
(Put You External IP here With Out The Parentheses) Your DNS

Step Four

Here you Need to go To Your Realms.config

It Will Look Like This

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
* How to use this config file: *
* Config files are in a block->variable->setting format. *
* A < signifies the opening of a block, the block name is expected after that. *
* After the block name, a space and then the settings sperated by = / ' '. *
* *
* e.g. *
* <block setting="0" someval = "1"> *
* *
* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
* of the line, or in shell format (#). *
********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "darkvirus.servegame.org" In Here Put Your DNS
Port = "8093"
Name = "logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# Colour:
# Realm colour in realm list display.
#
# TimeZone:
# Time zone the realm is in.
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "DarkVirus (HighRate)"
Address = "11.111.11.111:8129" here Put Your External IP
Icon = "PVP"
Colour = "1"
Population = "1.0"
TimeZone = "1">


Then Go To Your Logonserver.config And Find Something That Look Like This


<Client MinBuild = "6739"
MaxBuild = "9999">

If It Is Different Change it to This




This Is The Way I Got my Server To Be Public If You Need Any Help Or Have Any Questions Just Post It Here.

Glad i Could Help.

Remeber +Rep That Can Help You!

If You Want To join My Server Go here



DarkVirus

Lol I Almost Forgot Ok If You Want To be Able To Connect to Your Realm Do This!

Ok After you Make Your First Realm Go Down And Make Another One Leave Every Thing The Same But The IP make It 127.0.0.1 And Make It Realm 2 BUT Leave The Realm Count At 1 Dont Change

[Mango Jerry]

Thanks alot dude!

+Rep you !

[Neth'zul]

Is dis for ascent?

[Xtinction]

Yea I Did Work For Ascent That Is What I Am Useing And Thanks

[smartkid34]

Do i change realmlist to dynds server

[smartkid34]

Ok i did everything you said but when i pick realm it just goes back to the realmlist .

[Xtinction]

Ok If You Are The Owner You Set Your Realm List To 127.0.0.1 And The Other People Set It To Your DNS

[Xtinction]

Make Sure You Set Your Ports Right And Your Hosts File