[GUIDE][PICS] Setup 3.0.8 repacks menu

User Tag List

Page 1 of 5 12345 LastLast
Results 1 to 15 of 74
  1. #1
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    [GUIDE][PICS] Setup 3.0.8 repacks

    Find a repack.
    When you got your repack download, place it in
    C:\.
    (Some repacks must be placed there, else they don't run correctly.)

    Now look for a file in your repack folder called
    Ad.exe.
    You will have to place Ad.exe in your WoW folder. (Often located here:
    C:\Program Files\World of Warcraft)
    Make a new folder called
    Maps.
    Run
    Ad.exe.



    Now you will need to downlaod MySql.
    Install is simple, and when you get to end you will have to tick
    Configure MySql now, if it is not already ticked.
    Click Finish, and a new window should show up. Do like this:



    Now go to your repack folder and open the Configs folder.
    Open ArcEmu-Logonserver.conf in Notepad.
    Edit everything marked in red:
    Code:
    #######################################################################
    # ArcEmu Realms Configuration File  
    # Last updated at rev.1875
    #######################################################################
    
    
    # LogonDatabase Section
    #
    #    These directives are the location of the `realms` and `accounts`
    #    tables.
    #
    #    LogonDatabase.Host      - The hostname that the database is located on
    #    LogonDatabase.Username  - The username used for the mysql connection
    #    LogonDatabase.Password  - The password used for the mysql connection
    #    LogonDatabase.Name      - The database name
    #    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
    #    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #
    
    <LogonDatabase Hostname = "localhost"
                   Username = "root"
                   Password = "MySql_Pass"
                   Name     = "characters"
                   Port     = "3306"
                   Type     = "1">
    
    
    # Host Directive
    #
    #    This is the address that the realmlist will listen on.
    #    To listen on all addresses, set it to 0.0.0.0
    #    Default: 127.0.0.1 (localhost)
    #
    #    Note: ISHost is the interserver communication listener.
    #
    
    <Listen Host = "0.0.0.0"
            ISHost = "0.0.0.0"
            RealmListPort = "3724"
            ServerPort = "8093">
    
    # Server console logging level
    #
    #    This directive controls how much output the server will
    #    display in it's console. Set to 0 for none.
    #    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #    Default: 3
    #
    
    <LogLevel Screen = "0"
              File = "-1">
    
    # Account Refresh Time
    #
    #    This controls on which time interval accounts gets 
    #    refreshed. (In seconds)
    #    Default = 600 
    #    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
    #    
    #
    
    <Rates AccountRefresh = "600">
    
    # Accepted Build Range Setup
    #
    #    These two directives set up which clients will be
    #    allowed to authenticate with the realm list.
    #
    #    Set these to the same builds that the server was
    #    compiled for.
    #
    #    As of the last update, version 3.0.3 was build 9183.
    #
    
    <Client MinBuild = "9183"
            MaxBuild = "9999">
    
    # WorldServer Setup
    #
    #  RemotePassword
    #    This directive controls the password used to authenticate with the worldserver.
    #    It must be the same between the two configs. If it is not, your server will
    #    not register.
    #
    #    Default: "change_me_logon"
    #
    #  AllowedIPs
    #    This section MUST be completed, otherwise all attempts to link your servers will fail.
    #    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
    #    to make server connections to your logonserver, and register realms.
    #    For example, everything in the 127.0.0.* range would be:
    #         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
    #
    #    To allow a single IP,
    #         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
    #
    #  AllowedModIPs
    #    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
    #    (adding bans, GMs, account permissions, etc)
    #
    
    <LogonServer RemotePassword = "ascent"
                 AllowedIPs = "127.0.0.1/24"
                 AllowedModIPs = "127.0.0.1/24">
    Open ArcEmu-Realms.conf in Notepad.
    Edit everything marked in red.
    Code:
    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision rev.1875
    #######################################################################
    
    #********************************************************************************
    #* How to use this config file:                                                 *
    #* Config files are in a block->variable->setting format.                       *
    #* A < signifies the opening of a block, the block name is expected after that. * 
    #* After the block name, a space and then the settings sperated by = / ' '.     *
    #*                                                                              *
    #* e.g.                                                                         *
    #* <block setting="0" someval = "1">                                            *
    #*                                                                              *
    #* Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
    #* of the line, or in shell format (#).                                         *
    #********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    #    Address:
    #      The address (no port) of the server.
    #
    #    Port:
    #      The port on which the logon server listens. (*** NOT 3724 ***)
    #
    #    Name:
    #      Not really relavant, but name the logon.
    #
    #    RealmCount:
    #      The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "127.0.0.1"
        Port = "8093"
        Name = "Default Logon"
        RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    #    Name:
    #      The name of the realm.
    #    
    #    Address:
    #      The address (and port) of that realm.
    #
    #    Icon:
    #      The type of realm (PVP, Normal, RPPVP, RP)
    #
    #    TimeZone:
    #      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
    #       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
    #
    #    Population:
    #      (0 = low, 1 = medium, 2 = high)
    #
    #   Important information below
    #
    #     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
    #     This issues come up a lot!
    #
    #     Timezone values :
    #    0=Korean                16=China
    #    1=Development                17=CN1
    #    2=United States                18=CN2
    #    3=Oceanic                19=CN3
    #    4=Latin America                20=CN4
    #    5=Tournament                21=CN5
    #    6=Korean                22=CN6
    #    8=English                23=CN7
    #    9=German                24=CN8
    #    10=French                25=Tournament
    #    11=Spanish                26=Test Server
    #    12=Russian                27=Tournament
    #    13=Tournament                28=QA Server
    #    14=Taiwan                29=CN9
    #    15=Tournament                30=TestServer2
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "Realm_Name"
        Address = "127.0.0.1:8129" 
        Icon = "PVP"
        Population = "1.0"
        TimeZone = "2">
    Open ArcEmu-World.conf in Notepad.
    Edit everything in red.
    Code:
    #######################################################################
    # ArcEmu Configuration File
    # Last Update: $Id: arcemu-world.conf rev.1875
    #######################################################################
    
    #/********************************************************************************
    # * How to use this config file:                                                 *
    # * Config files are in a block->variable->setting format.                       *
    # * A < signifies the opening of a block, the block name is expected after that. * 
    # * After the block name, a space and then the settings sperated by = / ' '.     *
    # *                                                                              *
    # * e.g.                                                                         *
    # * <block setting="0" someval = "1">                                            *
    # *                                                                              *
    # * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
    # * of the line, or in shell format (#).                                         *
    # ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    #   Database.Host      - The hostname that the database is located on
    #   Database.Username  - The username used for the mysql connection
    #   Database.Password  - The password used for the mysql connection
    #   Database.Name      - The database name
    #   Database.Port      - Port that MySQL listens on. Usually 3306.
    #   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <WorldDatabase Hostname = "localhost" Username = "root" Password = "MySql_Pass" Name = "world" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "MySql_Pass" Name = "characters" Port = "3306" Type = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    #    Host
    #        This is the address that the server will listen on.
    #        To listen on all addresses, set it to 0.0.0.0
    #        Default: 127.0.0.1 (localhost)
    #
    #    WorldServerPort
    #        This is the port that the world server listens on.
    #        It has to be the same as what is specified in the
    #        realms table in the LogonDatabase.
    #        Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Listen Host = "0.0.0.0"
            WorldServerPort = "8129">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    #    Console Logging Level
    #        This directive controls how much output the server will
    #        display in it's console. Set to 0 for none, or -1 to disable.
    #        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #        Default: 3
    #
    #    World server packet logging feature
    #        If this directive is turned on, a file called `world.log`
    #        will be created in the server's directory and all packets
    #        sent and received by clients will be dumped here in bfg
    #        format.
    #        Default: 0
    #
    #    DisableCrashdumpReport
    #        Disables crashdump reports, else if the build has debugging enabled, 
    #        arcemu-world will call ./arcemu-crashreport every time it starts, so 
    #        if there is a core, a crashdump will automatically be reported 
    #        to the tracker at sf.net
    #        Needs gdb and curl
    #        Linux only
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Server Settings
    #
    #    PlayerLimit
    #        This directive controls the amount of sessions that will be
    #        accepted by the server before it starts to add people to 
    #        the server queue.
    #        Default: 100
    #
    #    Motd
    #        This message will be displayed by the server in the chat
    #        box every time any user logs on. Colors can be used in the
    #        standard WoW format.
    #        Default: "No MOTD specified
    #
    #    Send Stats On Join
    #        This directive controls whether the server will send the online player
    #        count to a cilent when it enters the world.
    #
    #    Breathing Setup
    #        If the breathing code is causing problems or you want to run a fun server, you can disable 
    #        water checks by enabling this directive.
    #        Default: 1
    #
    #    Seperate Channels Control
    #        This directive controls whether horde and alliance chats will be seperated across channels.
    #        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    #        across channels.
    #        Default: 0
    #
    #    Compression Threshold
    #        This directive controls the limit when update packets will be compressed using deflate.
    #        For lower-bandwidth servers use a lower value at the cost of cpu time.
    #        Default: 1000
    #
    #    Queue Update Rate
    #        This directive controls how many milliseconds (ms) between the updates
    #        that the queued players receieve telling them their position in the queue.
    #        Default: 5000 (5 seconds).
    #
    #    Kick AFK Players
    #        Time in milliseconds (ms) that a player will be kicked after they go afk.
    #        Default: 0 (disabled)
    #
    #    Connection Timeout
    #        This directive specifies the amount of seconds that the client will be disconnected
    #        after if no ping packet is sent. It is advised to leave it at the default.
    #        Default: 180
    #
    #    Realm Type
    #        This is the realm type that will be used by the server to handle world pvp.
    #        Default: 0 (pve)(RPPVE)
    #        Other values: 1(pvp)(RPPVP)
    #
    #    AdjustPriority
    #        Set the server to high process priority?
    #        Default: 0
    #
    #    RequireAllSignatures
    #        This directive controls whether the full 10 signatures will be required in order
    #        to turn in a petition. Smaller servers would be better off having it turned off.
    #        Default: off
    #
    #    ShowGMInWhoList
    #        This directive controls whether GM's will be shown in player's who lists or not.
    #        Default: on
    #
    #    MapUnloadTime
    #        This directive controls whether to unload map cells after an idle period of <x> seconds.
    #        Use on smaller servers or servers that are memory-limited. The server without cell unloading
    #        can use over 1.2GB memory with all creatures loaded.
    #        Default: 0
    #
    #    LimitedNames
    #        This directive forces all character names to be a-z and A-Z compliant.
    #        Default: 1
    #
    #    UseAccountData
    #        This directive determines whether the account_data table is used to save custom client data.
    #        May cause buggy behaviour.
    #        Default: 0
    #
    #    AllowPlayerCommands
    #        This directive, if enabled can allow players to use commands with a '0' command group.
    #        Default: 0
    #
    #    EnableLFGJoin
    #        If this is enabled, you can join the LFG channel without using the LFG tool.
    #        Default: 0
    #
    #    TimeZone
    #        Set your local timezone relative to GMT here.
    #        Default: 0
    #
    #    Collision
    #        Enable collision system (LoS checks).
    #        Default: 0
    #     Make sure you have collision.dll in the same folder as arcemu-world!
    #
    #    DisableFearMovement (In Battlegrounds and Arenas only!)
    #        Disable fear movement in arenas & battlegrounds. 
    #        Recommended if you do not have collision enabled!
    #        Default: 0 (off) Not blizzlike
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Server PlayerLimit = "100"
            Motd = "Welcome to an ArcEmu based server! Wrath of the Lich King is now live!"         
            SendStatsOnJoin = "1"
            EnableBreathing = "1"
            SeperateChatChannels = "0"
            CompressionThreshold = "1000"
            QueueUpdateInterval = "5000"
            KickAFKPlayers = "0"
            ConnectionTimeout = "180"
            RealmType = "1"
            AdjustPriority = "0"
            RequireAllSignatures = "0"
            ShowGMInWhoList = "1"
            MapUnloadTime="0"
            LimitedNames="1"
            UseAccountData="0"
            AllowPlayerCommands="0"
            EnableLFGJoin="0"
            TimeZone="0"
            Collision="0"
            DisableFearMovement="0">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Announce Configuration
    #
    #    Tag
    #      Configure what is shown in front of your announces in the [] brackets.
    #      Default: Staff (would give [Staff])
    #
    #    GMAdminTag
    #      Configure whether the <GM> or <Admin> tag is shown in announces.
    #      Default: 0 (disabled)
    #
    #    NameinAnnounce
    #      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
    #      Default: 1 (enabled)
    #
    #    NameinWAnnounce
    #      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
    #      of the message.
    #      Default: 1 (enabled)
    #
    #    ShowInConsole
    #      This controls whether announces are shown in the arcemu-world console or not.
    #      This does not apply for the team-internal GM announce.
    #      Default: 1 (enabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Announce       Tag = "Staff"
                    GMAdminTag = "0"
                    NameinAnnounce = "1"
                    NameinWAnnounce = "1"
                    ShowInConsole = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    # 
    #    These directives set up the multiplier in which regen values will be
    #    multiplied by every 2 seconds.
    #    Powers: 
    #        Power1 = Mana, Power2 = Rage, Power3 = Energy
    #    
    #    Reputation:
    #        Kill = Rep gained on kill, Quest = rep gained from quests
    #
    #    Honor:
    #        Honor = multiplier used to calculate honor per-kill.
    #
    #    PvP:
    #        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
    #
    #    XP:
    #        The xp that a player receives from killing a creature will be multiplied
    #        by this value in order to get his xp gain.
    #
    #    RestXP: 
    #        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    #        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    #        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
    #        Note that resting in a resting area (Zzz) goes 4 times faster.
    #        Default: 1 (bubble every 8 hrs)
    #
    #    Drop(Color):
    #        These values will be multiplied by the drop percentages of the items for creatures
    #        to determine which items to drop. All default to 1.
    #        To allow you better control of drops, separate multipliers have been created for items 
    #        of each quality group. 
    #
    #    DropMoney:
    #        This value will be multiplied by any gold looted and pickpocketed
    #
    #    Save:
    #        Value in milliseconds (ms) that will be between player autosaves.
    #        Default: 300000 (5 minutes)
    # 
    #    SkillChance:
    #        The chance that you have to level up a skill in melee or a profession is multiplied
    #        by this value.
    #        Default: 1
    #
    #    SkillRate:
    #        The amount of "levels" your skill goes up each time you gain a level is multiplied
    #        by this value.
    #
    #    ArenaMultiplier
    #         Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Rates Health="1"
           Power1="1"
           Power2="1"
           Power3="1"
           QuestReputation="1"
           KillReputation="1"
           Honor="1"
           PvPTimer="300000"
           ArenaQueueDiff="150"
           Compression="1"
           XP="1"
           QuestXP="1"
           RestXP="1"
           ExploreXP="1"
           DropGrey="1"
           DropWhite="1"
           DropGreen="1"
           DropBlue="1"
           DropPurple="1"
           DropOrange="1"
           DropArtifact="1"
           DropMoney="1"
           Save="300000"
           SkillChance="1"
           SkillRate="1"
           ArenaMultiplier2x="1"
           ArenaMultiplier3x="1"
           ArenaMultiplier5x="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    #   This should be set to 'gm_sync_channel' for the My_Master addon to work.
    #   Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GMClient GmClientChannel = "gm_sync_channel">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain & Collision Settings
    #
    #   Set the path to the map_xx.bin files and whether unloading should be enabled
    #   for the main world maps here. Unloading the main world maps when they go idle
    #   can save a great amount of memory if the cells aren't being activated/idled
    #   often. Instance/Non-main maps will not be unloaded ever.
    #
    #   Default:
    #      MapPath = "maps"
    #      vMapPath = "vmaps"
    #      UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Terrain MapPath = "maps"
             vMapPath = "vmaps"
             UnloadMaps = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    # 
    #    Cheaters:
    #        This directive sets up the cheater logging file, if turned on any
    #        cheat / packet exploit / speedhack attempts will be logged here.
    #
    #    GMCommands:
    #        These two directives set up the GM command logging fie. If turned on,
    #        most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Log Cheaters="0" GMCommands="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    #    These directives control the limits and behaviour of the ingame mail system.
    #    All options must have Mail prefixed before them.
    #   
    #    ReloadDelay                 
    #        Controls the delay at which the database is "refreshed". Use it if you're
    #        inserting mail from an external source, such as a web-based interface.
    #        0 turns it off.
    #        Default: 0
    #
    #    DisablePostageCostsForGM 
    #        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    #        Default: 1
    #
    #    DisablePostageCosts
    #        Disables postage costs for all players.
    #        Default: 0
    #
    #    DisablePostageDelayItems
    #        Disables the one hour wait time when sending mail with items attached.
    #        Default: 1
    #
    #    DisableMessageExpiry
    #        Turns off the 30 day / 3 day after read message expiry time. 
    #        WARNING: A mailbox still cannot show more than 50 items at once
    #        (stupid limitation in client).
    #        Default: 0
    #
    #    EnableInterfactionMail
    #        Removes the faction limitation for sending mail messages. Applies to all players.
    #        Default: 1
    #
    #    EnableInterfactionMailForGM 
    #        Removes the faction limitation for sending mail messages, but only applies
    #        to GM's. EnableInterfactionMail overrides this.
    #        Default: 1
    #   
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Mail ReloadDelay="0"
          DisablePostageCostsForGM="1"
          DisablePostageCosts="0"
          DisablePostageDelayItems="1"
          DisableMessageExpiry="0"
          EnableInterfactionMail="1"
          EnableInterfactionMailForGM="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    #        These directives set up the status dumper plugin. Filename is an
    #        absolute or relative path to the server binary. Interval is the
    #        time that the stats will be dumped to xml.
    #        Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <StatDumper FileName = "stats.xml" Interval = "120000">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    #    Preloading
    #        This directive controls whether the entire world will be spawned at server
    #        startup or on demand. It is advised to leave it disabled unless you are a
    #        developer doing testing.
    #        Default: off
    #
    #    Background Loot Loading
    #        This directive controls whether loot will be loaded progressively during
    #        startup or in the background in a seperate thread. Turning it on will
    #        result in much faster startup times.
    #        Default: on
    #
    #    Multithreaded Startup
    #        This controls whether the server will spawn multiple worker threads to
    #        use for loading the database and starting the server. Turning it on
    #        increases the speed at which it starts up for each additional cpu in your
    #        computer.
    #        Default: on
    #
    #    Additional Table Binding
    #        You can load static item/creature/etc data into the server using this directive.
    #        This way throughout database updates your custom data can be preserved.
    #        Format: "sourcetable destination table,sourcetable destinationtable"
    #        Example: "myitems items,mynpcs creature_names"
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Startup Preloading = "0"
             BackgroundLootLoading = "1"
             EnableMultithreadedLoading = "1"
             LoadAdditionalTables="">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    #    Lines
    #        This is the number of "messages" or lines that it will allow before stopping messages from
    #        being sent. This counter is reset every "Seconds" seconds.
    #        Default: 0 (disabled)
    #
    #    Seconds
    #        This is the number of seconds inbetween the Line counter being reset.
    #        Default: 0 (disabled)
    #
    #    SendMessage
    #        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    #        message will be sent upon flood triggering.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    #    DisablePings   
    #        This directive controls whether pings will be sent to the logonserver to check
    #        if the connection is still "alive". Expect problems if it is disabled.
    #        Default: 0
    #
    #    RemotePassword
    #        This directive controls the password used to authenticate with the logonserver.
    #        It must be the same between the two configs. If it is not, your server will
    #        not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer DisablePings = "0"
                 RemotePassword = "ascent">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    #    Teleport   
    #        This directive controls anti-teleport hack checks will be enabled or not.
    #        Default: 1
    #
    #    Speed
    #        This directive controls anti-speed hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    SpeedThreshold
    #        This directive controls the threshold at which the speedhack detection will trip.
    #        It's (characters' move time of distance - real move time of distance)
    #        Default: -600.0
    #
    #    FallDamage
    #        This directive controls anti-fall damage hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    Flying
    #        This directive controls whether flight hacks will be performed on players or not.
    #        Default: 1
    #
    #    FlightThreshold
    #       This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    #       Default: 10
    #
    #    DisableOnGM
    #        This directive controls hack checks will be disabled for GM's or not.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AntiHack Teleport="1"
              Speed="1"
              FallDamage="1"
              Flight="1"
          FlightThreshold="10" 
              DisableOnGM="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    #    These are the periods that the server will wait before doing periodic duties. At the moment only
    #    arena point calculation and honor point calculation are used here.
    #
    #    Default:
    #         Arena: weekly
    #         Honor: daily
    #             (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Periods HonorUpdate="daily"
             ArenaUpdate="weekly"
             DailyUpdate="daily">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    #    These directives control some of the aspects in the channel system.
    #
    #    BannedChannels
    #         If you would like to ban users from creating or joining a channel specify them here in a ';'
    #         seperated list.
    #         Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Channels BannedChannels="">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    #    These directives control some of the aspects in the voice chat system.
    #
    #    Enabled
    #         If you want to enable the voice chat system, this must be set to 1.
    #         Default: "0"
    #
    #    ServerIP
    #         This is the IP of the voice chat server.
    #         Default: "127.0.0.1"
    #
    #    ServerPort
    #         This is the TCP port of the voice chat server.
    #         Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <VoiceChat Enabled="0"
               ServerIP="127.0.0.1"
               ServerPort="3727">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Remote Console Setup
    #
    #    These directives control the remote administration console.
    #
    #    Enabled
    #         If you want to enable the remote administration console, set this.
    #         Default: 0
    #
    #    Host
    #         This is the interface the RA server listens on.
    #         Default: "0.0.0.0"
    #
    #    Port
    #         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    #         Default: 8092
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <RemoteConsole Enabled="0"
                   Host="0.0.0.0"
                   Port="8092">
          
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Scripting Engine Setup
    #
    #    ArcEmu can support multiple script backends via the means of loading .dll files for them.
    #    This section in the config can enable/disable those backends.
    #
    #    LUA
    #         If you would like to enable the LUA scripting backend, enable this.
    #         Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <ScriptBackends LUA="1"
                    AS="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Movement Setup
    #
    #    NOTE: For any of these directives to function, movement compression has to be compiled into
    #          the server.
    #
    #    FlushInterval
    #        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    #        If you have a high threshold, keeping this at 1-2 seconds will work better.
    #        Default: 1000 (one second)
    #
    #    CompressionRate
    #        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    #        Range: 1-9 (or 0 is disable)
    #        Default: 1
    #
    #    CompressionThreshold
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. It is advised to keep it at least 30 units. This value is used for players.
    #        Default: 30.0
    #
    #    CompressionThresholdCreatures
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. This value is used for creatures, so it can be a lot lower.
    #        Default: 10.0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Movement FlushInterval="1000"
              CompressRate="1"
              CompressThreshold="30.0"
              CompressThresholdCreatures="10.0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    #    LocaleBindings
    #        This is a list of locale names and the other locale you want to associate with them.
    #        For example, to make the European client always use the french language, "enGB=frFR"
    #
    #        Must be terminated by a space.
    #
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Localization LocaleBindings="">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Dungeon / Instance Setup
    #
    #    TakeGroupLeaderID
    #        If a player doesn't have an instance id, the group isn't already assigned
    #        to an instance and the group or raid leader already have one, the player will
    #        be bound to the instance id of the group/raid leader.
    #        Default: 1 (enabled)
    #
    #    SlidingExpiration
    #        If enabled, persistent instances will expire relative to the creation time.
    #        Otherwise persistent instances will expire at fixed points of time. (blizz like)
    #        Default: 0 (disabled)
    #
    #    DailyHeroicInstanceResetHour
    #        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
    #        Default: 5
    #
    #    CheckTriggerPrerequsites
    #        Entering & checks
    #        Default: 1
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <InstanceHandling TakeGroupLeaderID="1" 
                      SlidingExpiration="0" 
                      DailyHeroicInstanceResetHour="5" 
                      CheckTriggerPrerequsites="1" >
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # BattleGround settings
    # Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
    #
    #    AlteracValley
    #    AV_MIN
    #    AV_MAX
    #
    #    ArathiBasin
    #    AB_MIN
    #    AB_MAX
    #
    #    WarSong
    #    WS_MIN
    #    WS_MAX
    #
    #    Eyes Of The Storm.
    #    EOS_MIN
    #    EOS_MAX
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Battleground AV_MIN="0" 
                                AV_MAX="40" 
                                AB_MIN="4" 
                                AB_MAX="15" 
                                EOS_MIN="4" 
                                EOS_MAX="15" 
                                WS_MIN="2" 
                                WS_MAX="10" >
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    #    StartOnGMIsland
    #
    #     Makes GM Characters start on GM Island
    #
    #     Also sets their bind location to GM Island
    #     Default:1 (Yes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <GameMaster StartOnGMIsland = "1">

    Ad.exe should now be done, if it is not done yet - wait for it to be.
    Go into your WoW folder and find the folder Maps, which you created earlier. Go inside it, and check that there is alot of files inside it.
    Copy the whole folder called Maps, and paste it into your repack folder.

    Now you need to download Navicat.
    It is easy to install, so no problems there.

    Now go to
    Start>All Programs>MySql>Mysql Server 5.0>MySql Command Line Client.

    Type in your MySql Password.
    Then press Enter on your keyboard.
    If it closes down and gives you a *Beep* sound, it means you typed the password wrong.
    If your password got accepted, it should look like this:



    Open Navicat.



    Do as it says on the picture, then click Test Connection. If it says Connection Succesfully!, it means you done everything right.
    Now press Ok.

    Right click as I did on the picture below, and chose New Database....



    Now a box will pop up. Do like I did below, and press Ok.



    Now it should come up with a new database to the left called World.
    Do the same as you just did, but now call the database Characters.
    Do it once agien, not you got to call the last one Logon.
    Right click on each of them, and chose Open Database.

    Right click on the database World.
    Chose Execute Batch File.
    It will now pop up with a box, and in that box you can chose what to execute.
    Find your repack folder in there, open the folder called Database, and chose World-Structure.sql.
    Click Start, and wait for it to finish.



    Do it to the 2 other databases too, but chose the file matching their name.

    Open your WoW folder and find Realmlsit.wtf. (C:\Program Files\World of Warcraft\Data\enGB) Open it with Notepad.
    Delete everything inside it, and write:
    Set Realmlist 127.0.0.1.


    Mini Guide:
    Open the folder called Server.
    Start MySql.bat.
    Now go back - and open your repack folder. (Where you have logon,world server)
    Start ArcEmu-Logonserver.exe.
    Start ArcEmu-World.exe.



    Pictures taken from my 2.4.3 guide:
    http://www.mmowned.com/forums/ascent...3-repacks.html



    Last edited by 2dgreengiant; 02-02-2009 at 01:39 PM.

    [GUIDE][PICS] Setup 3.0.8 repacks
  2. #2
    zwhit's Avatar Member
    Reputation
    3
    Join Date
    Nov 2008
    Posts
    30
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Look's good, this is a pretty good guide for the newbies, nice job.

    +rep.

  3. #3
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks.

  4. #4
    wetodded's Avatar Member
    Reputation
    1
    Join Date
    Feb 2007
    Posts
    4
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Which repack is the best. Such as not as many bugs?

  5. #5
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Which repack is the best. Such as not as many bugs?


    WereWolf, then Conan, and at last Vampirism.

  6. #6
    cole084's Avatar Member
    Reputation
    1
    Join Date
    Oct 2007
    Posts
    3
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    umm.... yeah... the database folder is missing in all of them

  7. #7
    wetodded's Avatar Member
    Reputation
    1
    Join Date
    Feb 2007
    Posts
    4
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Yea lol, I just noticed that when trying to install. Please put a link for the database folders.

  8. #8
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    In those repack here, you just need to start MySql.bat.
    Also, i didn't base this guide on the repacks that I linked in the guide.

  9. #9
    mitch56's Avatar Member
    Reputation
    1
    Join Date
    Nov 2008
    Posts
    12
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    nice job this helped me out alot

  10. #10
    kama101's Avatar Member
    Reputation
    8
    Join Date
    Mar 2007
    Posts
    24
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Im using the Werewulf Repack, I have Mysql and Navicat set up already, and I cant find the batch files to execute with Navicat. I don't even see a database folder, and I tried to run the MySql.bat file and got this error message in the dos window that popped up.

    MySQL is running, don't close this window.
    081223 17:02:50 [ERROR] Can't find messagefile '\AC Web Ultimate Repack\Server\m
    ysql\share\english\errmsg.sys'
    081223 17:02:50 [ERROR] Aborting


    MySQL could not be started

  11. #11
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    \AC Web Ultimate Repack\Server\m
    ysql\share\english\errmsg.sys
    Make sure that the folder just before the folder server is called Ac Web Ultimate Repack. If that don't help, then check that the rest of the folders is called what it says.

  12. #12
    lehtea's Avatar Member
    Reputation
    2
    Join Date
    Oct 2006
    Posts
    18
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cool guide

  13. #13
    lehtea's Avatar Member
    Reputation
    2
    Join Date
    Oct 2006
    Posts
    18
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    a fiund the db on wolfsreapck but when ln going to extrackt it its like 200 small fils that l have to extrat next extact how do l get all in 1 ??+
    Last edited by lehtea; 12-24-2008 at 11:19 AM.

  14. #14
    Hammerich's Avatar Member
    Reputation
    4
    Join Date
    May 2007
    Posts
    15
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by Chriller View Post
    In those repack here, you just need to start MySql.bat.
    Also, i didn't base this guide on the repacks that I linked in the guide.
    Never ever post a guide, before you have tested it -.-

  15. #15
    Erase's Avatar Banned
    Reputation
    229
    Join Date
    Jun 2008
    Posts
    990
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by Hammerich View Post
    Never ever post a guide, before you have tested it -.-
    I have tested it.. Said that I didn't base this guide on the repacks that I did link to, but repacks where the .sql database files follows.

Page 1 of 5 12345 LastLast

Similar Threads

  1. [PICS] Setup 2.4.3 Repacks
    By Erase in forum WoW EMU Guides & Tutorials
    Replies: 152
    Last Post: 06-05-2010, 07:09 PM
  2. Full guide on how to setup your Ac-WEB Repack
    By Undead_King in forum WoW EMU Guides & Tutorials
    Replies: 20
    Last Post: 01-15-2008, 05:58 PM
  3. [GUIDE] How to setup MGT-Web ADVANCED repack!
    By Eepi in forum WoW EMU Guides & Tutorials
    Replies: 5
    Last Post: 11-03-2007, 03:50 AM
All times are GMT -5. The time now is 12:46 PM. Powered by vBulletin® Version 4.2.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved. User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search