[Guide] Using apple's repack

[lilbdiablo12]

Files you need

Navicathttp://www.navicat.com/download.html]Navicat database holder (THis is your database control, you will need it in order to edit your database!!!!)


Mysqlhttp://dev.mysql.com/downloads/mysql/5.0.html#downloads]Mysql connection host (This is needed for your database connection to your server!!!!!!)


.NET Framework 3.5http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en] This will be needed to run the .exe's for ascent (THIS IS A MUST NEED, IF YOU DO NOT HAVE IT THEN GET IT!!!!!!!!!!)

Apple's Repackhttp://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en]FIlebeam Hosting


Ok, now that you have all your programs lets begin.

First step it setting up MYsql, Install this program, and do a Typical configuration. Keep going untill makes you put in a password, create your password and hit execute. When that is done your connection infromation should be Username: Root and password: (What you set it as)

Ok now your done with that, go install Navicat, once you have done that Make a new connection. Name it anything you like.
Once you have it named, itll already have the username in there for you, just type in the password, hit test connection, if it says it connected then your good to roll


IF YOU DO NOT HAVE .NET FRAMEWORK INSTALLED ALREADY DO IT NOW!!!!!!

Ok go into navicat, open your connection, right click on your connection and make your database a name!!!!! -VERY IMPORTANT!!!!-

Now to configure your files, open up Apples repack. Open up the accent folder

Logon.conf
---what i put in RED make sure it is correct!!!!1

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"  ----- this should be right by defualt
               Username = "root" ------ this should be right by defualt
               Password = "(password you set)"
               Name     = "(the database you made in navicat)"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 100
#

<Rates AccountRefresh = "100">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "7799"
        MaxBuild = "9999">

# WorldServer Setup
#
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#

<LogonServer RemotePassword = "(mysql password)">

Now the realms.conf

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
             Port = "8093"
             Name = "Default Logon"
             RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    Colour:
#        Realm colour in realm list display.
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "(make this anything you want)"
        Address = "127.0.0.1:8129" ---make sure its this
        Icon = "PVP"
        Colour = "1"
        Population = "1"
        TimeZone = "1">

Now the fun world.conf

#######################################################################
# Ascent Configuration File
# Last Update: $Id: ascent-world.conf 4090 2008-03-03 16:22:26Z emsy $
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
#   Database.Host      - The hostname that the database is located on
#   Database.Username  - The username used for the mysql connection
#   Database.Password  - The password used for the mysql connection
#   Database.Name      - The database name
#   Database.Port      - Port that MySQL listens on. Usually 3306.
#   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "127.0.0.1" Username = "root" Password = "(mysql password)" Name = "(database you created)" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "127.0.0.1" Username = "root" Password = "(MYsql password)" Name = "(database you created)" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
#    Host
#        This is the address that the server will listen on.
#        To listen on all addresses, set it to 0.0.0.0
#        Default: 127.0.0.1 (localhost)
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogLevel Screen="0" File="-1" World="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
#    PlayerLimit
#        This directive controls the amount of sessions that will be
#        accepted by the server before it starts to add people to 
#        the server queue.
#        Default: 100
#
#    Motd
#        This message will be displayed by the server in the chat
#        box every time any user logs on. Colors can be used in the
#        standard WoW format.
#        Default: "No MOTD specified
#
#    Send Build On Join
#        This directive controls whether the server's internal revision
#        will be sent to clients upon entering the world. Use it to help
#        testers report bugs.
#
#    Send Stats On Join
#        This directive controls whether the server will send the online player
#        count to a cilent when it enters the world.
#
#    Breathing Setup
#        If the breathing code is causing problems or you want to run a fun server, you can disable 
#        water checks by enabling this directive.
#        Default: 1
#
#    Level Cap
#        This variable controls the level that stats will be generated up to internally.
#        Beyond this level players can still see a higher level visually but their stats won't
#        increase beyond this point.
#        Default: 70
#
#	Generated Level Level Cap
#	   This variable controls the level at which stats will generate up to. Generally the formulas go
#	   crazy after level 70 so this way you can keep the high visual but stats at a reasonable value.
#	   Default: 70
#
#    Seperate Channels Control
#        This directive controls whether horde and alliance chats will be seperated across channels.
#        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
#        across channels.
#        Default: 0
#
#    Compression Threshold
#        This directive controls the limit when update packets will be compressed using deflate.
#        For lower-bandwidth servers use a lower value at the cost of cpu time.
#        Default: 1000
#
#    Queue Update Rate
#        This directive controls how many milliseconds (ms) between the updates
#        that the queued players receieve telling them their position in the queue.
#        Default: 5000 (5 seconds).
#
#    Kick AFK Players
#        Time in milliseconds (ms) that a player will be kicked after they go afk.
#        Default: 0 (disabled)
#
#    Connection Timeout
#        This directive specifies the amount of seconds that the client will be disconnected
#        after if no ping packet is sent. It is advised to leave it at the default.
#        Default: 180
#
#    Realm Type
#        This is the realm type that will be used by the server to handle world pvp.
#        Default: 0 (pve)(RPPVE)
#        Other values: 1(pvp)(RPPVP)
#
#    AdjustPriority
#        Set the server to high process priority?
#        Default: 0
#
#    RequireAllSignatures
#        This directive controls whether the full 10 signatures will be required in order
#        to turn in a petition. Smaller servers would be better off having it turned off.
#        Default: off
#
#    ShowGMInWhoList
#        This directive controls whether GM's will be shown in player's who lists or not.
#        Default: on
#
#    MapUnloadTime
#        This directive controls whether to unload map cells after an idle period of <x> seconds.
#        Use on smaller servers or servers that are memory-limited. The server without cell unloading
#        can use over 1.2GB memory with all creatures loaded.
#        Default: 0
#
#    LimitedNames
#        This directive forces all character names to be a-z and A-Z compliant.
#        Default: 1
#
#    UseAccountData
#        This directive determines whether the account_data table is used to save custom client data.
#        May cause buggy behaviour.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "1000"
        Motd = "Hi everyone! Welcome to Hell"        
        SendBuildOnJoin = "1"
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        LevelCap = "70"
        GenLevelCap = "70"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0"
        LimitedNames="1"
        UseAccountData="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
# 
#    These directives set up the multiplier in which regen values will be
#    multiplied by every 2 seconds.
#    Powers: 
#        Power1 = Mana, Power2 = Rage, Power3 = Energy
#    
#    Reputation:
#        Kill = Rep gained on kill, Quest = rep gained from quests
#
#    Honor:
#        Honor = multiplier used to calculate honor per-kill.
#
#    PvP:
#        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
#
#    XP:
#        The xp that a player receives from killing a creature will be multiplied
#        by this value in order to get his xp gain.
#
#    RestXP: 
#        Value is the amount of rest XP a player will recieve per minute of rest time.
#
#    Drop(Color):
#        These values will be multiplied by the drop percentages of the items for creatures
#        to determine which items to drop. All default to 1.
#        To allow you better control of drops, separate multipliers have been created for items 
#        of each quality group. 
#
#    DropMoney:
#        This value will be multiplied by any gold looted and pickpocketed
#
#    Save:
#        Value in milliseconds (ms) that will be between player autosaves.
#        Default: 300000 (5 minutes)
# 
#    SkillChance:
#        The chance that you have to level up a skill in melee or a profession is multiplied
#        by this value.
#        Default: 1
#
#    SkillRate:
#        The amount of "levels" your skill goes up each time you gain a level is multiplied
#        by this value.
#
#    ArenaMultiplier
#         Every week/day the arena points gained by a player will be multiplied by this value.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="1"
       Power1="1"
       Power2="1"
       Power3="1"
       QuestReputation="600"
       KillReputation="600"
       Honor="100"
       PvPTimer="300000"
       Compression="1"
       XP="9000"
       QuestXP="1"
       RestXP="1"
       DropGrey="5"
       DropWhite="10"
       DropGreen="1"
       DropBlue="69"
       DropPurple="99"
       DropOrange="76"
       DropArtifact="1"
       DropMoney="600"
       Save="300000"
       SkillChance="1"
       SkillRate="1"
       ArenaMultiplier2x="1"
       ArenaMultiplier3x="1"
       ArenaMultiplier5x="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
#   This should be set to 'gm_sync_channel' for the My_Master addon to work.
#   Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain Configuration
#
#   Set the path to the map_xx.bin files and whether unloading should be enabled
#   for the main world maps here. Unloading the main world maps when they go idle
#   can save a great amount of memory if the cells aren't being activated/idled
#   often. Instance/Non-main maps will not be unloaded ever.
#
#   Default:
#      MapPath = "maps"
#      UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps" UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
# 
#    Cheaters:
#        This directive sets up the cheater logging file, if turned on any
#        cheat / packet exploit / speedhack attempts will be logged here.
#
#    GMCommands:
#        These two directives set up the GM command logging fie. If turned on,
#        most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
#    These directives control the limits and behaviour of the ingame mail system.
#    All options must have Mail prefixed before them.
#   
#    ReloadDelay                 
#        Controls the delay at which the database is "refreshed". Use it if you're
#        inserting mail from an external source, such as a web-based interface.
#        0 turns it off.
#        Default: 0
#
#    DisablePostageCostsForGM 
#        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
#        Default: 1
#
#    DisablePostageCosts
#        Disables postage costs for all players.
#        Default: 0
#
#    DisablePostageDelayItems
#        Disables the one hour wait time when sending mail with items attached.
#        Default: 1
#
#    DisableMessageExpiry
#        Turns off the 30 day / 3 day after read message expiry time. 
#        WARNING: A mailbox still cannot show more than 50 items at once
#        (stupid limitation in client).
#        Default: 0
#
#    EnableInterfactionMail
#        Removes the faction limitation for sending mail messages. Applies to all players.
#        Default: 1
#
#    EnableInterfactionMailForGM 
#        Removes the faction limitation for sending mail messages, but only applies
#        to GM's. EnableInterfactionMail overrides this.
#        Default: 1
#   
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
#        These directives set up the status dumper plugin. Filename is an
#        absolute or relative path to the server binary. Interval is the
#        time that the stats will be dumped to xml.
#        Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
#    Preloading
#        This directive controls whether the entire world will be spawned at server
#        startup or on demand. It is advised to leave it disabled unless you are a
#        developer doing testing.
#        Default: off
#
#    Background Loot Loading
#        This directive controls whether loot will be loaded progressively during
#        startup or in the background in a seperate thread. Turning it on will
#        result in much faster startup times.
#        Default: on
#
#    Multithreaded Startup
#        This controls whether the server will spawn multiple worker threads to
#        use for loading the database and starting the server. Turning it on
#        increases the speed at which it starts up for each additional cpu in your
#        computer.
#        Default: on
#
#    Additional Table Binding
#        You can load static item/creature/etc data into the server using this directive.
#        This way throughout database updates your custom data can be preserved.
#        Format: "sourcetable destination table,sourcetable destinationtable"
#        Example: "myitems items,mynpcs creature_names"
#        Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1"
         LoadAdditionalTables="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
#    Lines
#        This is the number of "messages" or lines that it will allow before stopping messages from
#        being sent. This counter is reset every "Seconds" seconds.
#        Default: 0 (disabled)
#
#    Seconds
#        This is the number of seconds inbetween the Line counter being reset.
#        Default: 0 (disabled)
#
#    SendMessage
#        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
#        message will be sent upon flood triggering.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
#    DisablePings   
#        This directive controls whether pings will be sent to the logonserver to check
#        if the connection is still "alive". Expect problems if it is disabled.
#        Default: 0
#
#    RemotePassword
#        This directive controls the password used to authenticate with the logonserver.
#        It must be the same between the two configs. If it is not, your server will
#        not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
             RemotePassword = "(MYsql password)">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup
#
#    Teleport   
#        This directive controls anti-teleport hack checks will be enabled or not.
#        Default: 1
#
#    Speed
#        This directive controls anti-speed hack checks will be performed on player movement or not.
#        Default: 1
#
#    FallDamage
#        This directive controls anti-fall damage hack checks will be performed on player movement or not.
#        Default: 1
#
#    Flying
#        This directive controls whether flight hacks will be performed on players or not.
#        Default: 1
#
#    DisableOnGM
#        This directive controls hack checks will be disabled for GM's or not.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="0"
          Speed="0"
          FallDamage="1"
          Flight="1"
          DisableOnGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Period Setup
#
#    These are the periods that the server will wait before doing periodic duties. At the moment only
#    arena point calculation and honor point calculation are used here.
#
#    Default:
#         Arena: weekly
#         Honor: daily
#             (blizzlike values)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"
         ArenaUpdate="weekly">
         
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AscentStats Setup				*** PRIVACY NOTE: READ ME CAREFULLY ***
#
#    These are the values that the AscentStats client uses while communicating with an AscentStats server.
#    Statistics will be sent anonymously if a server guid is not set.
#    If you do not want your ascent client communicating with AscentStats servers, disable it here.
#    No personally-identifiable information is sent in these transmissions. The actual data sent is:-
#      stats=Ascent|PLATFORM|CONFIG|ARCH|REV|PLAYER|QUEUE|ALLIANCE|HORDE|AVGLAT|PEAK
#
#    If you don't mind your server transmitting this information, please leave AscentStats enabled. It
#    allows our developers to understand our users needs better and in the end provide you with a better
#    product.
#
#    Enable
#         To disable stat transmission completely, set this to 0.
#
#    ServerGUID
#         This is the GUID assigned to your server by the AscentStats server. To register your server, go
#         to http://www.example.com/ascentstats/register_server.php
#
#    ServerKey
#         This is the key used to secure stats sent by your server so they can't be forged. This key is
#         obtained after registering your server.
#
#    Default:
#         Enabled
#         Server Key "NONE"
#         Server GUID "NONE"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AscentStats Enable="1"
             ServerGUID="NONE"
             ServerKey="NONE">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channels Setup
#
#    These directives control some of the aspects in the channel system.
#
#    BannedChannels
#         If you would like to ban users from creating or joining a channel specify them here in a ';'
#         seperated list.
#         Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# VoiceChat Setup
#
#    These directives control some of the aspects in the voice chat system.
#
#    Enabled
#         If you want to enable the voice chat system, this must be set to 1.
#         Default: "0"
#
#    ServerIP
#         This is the IP of the voice chat server.
#         Default: "127.0.0.1"
#
#    ServerPort
#         This is the TCP port of the voice chat server.
#         Default: "3727"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"
           ServerIP="127.0.0.1"
           ServerPort="3727">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remote Console Setup
#
#    These directives control the remote administration console.
#
#    Enabled
#         If you want to enable the remote administration console, set this.
#         Default: 0
#
#    Host
#         This is the interface the RA server listens on.
#         Default: "0.0.0.0"
#
#    Port
#         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
#         Default: 8092
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<RemoteConsole Enabled="0"
               Host="0.0.0.0"
               Port="8092">
      

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Scripting Engine Setup
#
#    Ascent can support multiple script backends via the means of loading .dll files for them.
#    This section in the config can enable/disable those backends.
#
#    LUA
#         If you would like to enable the LUA scripting backend, enable this.
#         Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ScriptBackends LUA="1"
                AS="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Movement Setup
#
#    NOTE: For any of these directives to function, movement compression has to be compiled into
#          the server.
#
#    FlushInterval
#        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
#        If you have a high threshold, keeping this at 1-2 seconds will work better.
#        Default: 1000 (one second)
#
#    CompressionRate
#        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
#        Range: 1-9 (or 0 is disable)
#        Default: 1
#
#    CompressionThreshold
#        This is the distance that will be used to determine if an object needs to be sent compressed or
#        normal. It is advised to keep it at least 30 units. This value is used for players.
#        Default: 30.0
#
#    CompressionThresholdCreatures
#        This is the distance that will be used to determine if an object needs to be sent compressed or
#        normal. This value is used for creatures, so it can be a lot lower.
#        Default: 10.0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Movement FlushInterval="1000"
          CompressRate="1"
          CompressThreshold="30.0"
          CompressThresholdCreatres="10.0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Localization Setup
#
#    LocaleBindings
#        This is a list of locale names and the other locale you want to associate with them.
#        For example, to make the European client always use the french language, "enGB=frFR"
#
#        Must be terminated by a space.
#
#        Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Localization LocaleBindings="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Moon PvPToken="1" PvPTokenID="29739" PvPKillAnnounce="1" DJ="1" Portals="0" StripperNPC="1" WarpNPC="1" MorphNPC="1" HealNPC="1" L70etc="1" VipAccount="1" MounterNPC="1" BuffNPC="1" CoinNPC="0" Max_SkillNPC="1">

Fine the world.sql in it YOU WILL PROBALLY HAVE TO EXTRACT THAT TOO!!!!!! Make sure you do, go into navicate, right click on your database, select "Execute Batch File" Execute world.sql

Wait for it to be done.

Now open ascent_logon.exe wait for it to load, it should be instant
Then ope ascent_World.exe wait for it to load (give it some time)

Enjoy your private server!!!!!!!!!!!!

If you have any problems feel free to ask.

GM commands for when you get in!!!

Banstick Commands [b]
banchar: Bans character x with or without reason
This command is confirmed to work. Givign a reason seems pointless because the other player does not see the reason. Possibly useful in GM tickets or for GM's to see?

unbanchar: Unbans character x
Confirmed to work.

kick: Kicks player from server, with or without reason
confirmed to work. Takes 5 seconds.

paralyze: Roots/Paralyzes the target.
confirmed to work. Player can twist, sit, withdrawl weapon, and talk. No jumping or moving. Dueling is allowed but player can not move, but can attack back.

unparalyze: Unroots/Unparalyzes the target.
confirmed to work.

Chat Control [c]
allowwhispers: Allows whispers from player <s> while in gmon mode.
blockwhispers: Blocks whispers from player <s> while in gmon mode.

Debug Commands [d]
debug: Main ‘debug’ command table. Usage: .debug <subcommand> <args>
infront: No description entered.
showreact: This seems to send a specified reaction to a character or player. Just need to find react #'s.
aimove: brings selected creature/npc to player.
dist: reveals current distance between player and selected object.
face: function unknown at this time.
moveinfo: Displays information on selected creature, such as is it attacking, what it's facing, and other info.
setbytes: Set fields 1-4 to X X X X. Not sure what differnce things make at the moment.
getbytes: Get bytes for fiels 1-4 in numbers such as X X X X
unroot: confirmed to work, no idea for reason.
root: confirmed to work, no idea for reason.
landwalk: reason unknown.
waterwalk: Allows you to walk on water.
castspell: .castspell <spellid> - Casts spell on target.
castspellne: .castspellne - Casts spell on target (only plays animations, doesnt handle effects or range/facing/etc. Also doesn't play all animations.
celldelete: USE WITH CAUTION! '.celldelete YES' - Removes everything in current cell from game and database. '.celldelete YES YES' removes everything in a range of 1cell.
addrestxp: .addrestxp - Adds x rest XP to player.
generatename: .generatename - Generates name for pet, etc.
attackerinfo: .attackerinfo - Shows selected mob/player's attacker's infomation.
showattackers: .showattackers - Shows selected mob/player's attacker on the minimap.
aggrorange: .aggrorange - Shows aggro Range of the selected Creature.
knockback : .knockback <value> - Knocks you back.
fade : .fade <value> - calls ModThreatModifyer().
threatMod : .threatMod <value> - calls ModGeneratedThreatModifyer().
calcThreat : .calcThreat <dmg> <spellId> - calculates threat.
threatList : .threatList - returns all AI_Targets of the selected Creature.
gettptime: grabs transporter travel time
itempushresult: sends item push result
weather: used ton control weather. ie .debug weather 2 90 to make it rain hard. playing with all #'s
haha 8 10 is snow!

setbit: afraid to test at the moment.
setvalue: afraid to test at the moment.
getpos: Seems to have no function.

Battlegrounds Commands [e]
battleground: Main BG command table. Usage: .battleground <subcommand> <args>
setbgscore: <Teamid> <Score> - Sets battleground score. 2 Arguments.
startbg: Starts current battleground match.
pausebg: Pauses current battleground match.
bginfo: Displays information about current battleground.
battleground: Shows BG Menu
setworldstate: <var> <val> - Var can be in hex. WS Value.
playsound: <val>. Val can be in hex.
setbfstatus: .setbfstatus – Not Yet Implemented.
leave: Leaves the current battleground.

Extended Debug Commands? [f]
killbyplayer: Disconnects the player with name <s>.
killbyaccount: Disconnects the session with account name <s>.
getrate: Gets rate <x>. ?
setrate: Sets rate <x>. ?

GM Ticket Commands [g]
gmTicket: Main GM ticket system command table. Usage: .gmTicket <subcommand> <args>
get: Gets GM Ticket
getId: Gets GM Ticket by ID
delId: Deletes GM Ticket by ID

Invincibility Command [j]
invincible: .invincible - Toggles INVINCIBILITY (mobs won't attack you)

Invisibility Command [i]
invisible: .invisible - Toggles INVINCIBILITY and INVISIBILITY (mobs won't attack you and nobody can see you, but they can see your chat messages)

Guild Commands [l]
createguild: No description entered.

Modify commands [m]
modify: Main stat-modification command table. Usage: .modify <subcommand> <args>
hp: Health Points/HP
mana: Mana Points/MP
rage: Rage Points
energy: Energy Points
armor: Armor
holy: Holy Resistance
fire: Fire Resistance
nature: Nature Resistance
frost: Frost Resistance
shadow: Shadow Resistance
arcane: Arcane Resistance
damage: Unit Damage Min/Max
scale: Size/Scale
gold: Gold/Money/Copper
speed: Movement Speed
nativedisplayid: Native Display ID
displayid: Display ID
flags: Unit Flags:
faction: Faction Template
dynamicflags: Dynamic Flags
talentpoints: Talent Points
loyalty: Loyalty
spirit: Spirit
boundingraidus: Bounding Radius
combatreach: Combat Reach
emotestate: NPC Emote State

More Modify Commands [m]
createaccount: .createaccount - Creates account. Format should be .createaccount username password email
playerinfo: .playerinfo - Displays informations about the selected character (account...)
mount: Mounts into modelid x.
dismount: Dismounts.
start: Teleport's you to a starting location
levelup: No description entered.
additem: No description entered.
removeitem: Removes item %u count %u.
learn: Learns spell
unlearn: Unlearns spell
learnskill: .learnskill <skillid> (optional) <value> <maxvalue> - Learns skill id skillid.
advanceskill: advanceskill <skillid> <amount, optional, default = 1> - Advances skill line x times..
removeskill: .removeskill <skillid> - Removes skill
increaseweaponskill: .increaseweaponskill <count> - Increase eqipped weapon skill x times (defaults to 1).
removeauras: Removes all auras from target
setmotd: Sets MOTD
additemset: Adds item set to inv.
gotrig: Warps to areatrigger <id>
createinstance: Creates instance on map <map>
goinstance: Joins instance <instance> <x> <y> <z> <optional mapid>
exitinstance: Exits current instance, return to entry point.
dbreload: Reloads some of the database tables
spawnspiritguide: Spawns a spirit guide (params: 1 = horde, 0 = alliance)
advanceallskills: Advances all skills <x> points.
unlockmovement: Unlocks movement for player.
modperiod: Changes period of current transporter.
npcfollow: Sets npc to follow you
follow: Sets npc to not follow anything
formationlink1: Sets formation master.
formationlink2: Sets formation slave with distance and angle
formationclear: Removes formation from creature
playall: Plays a sound to the entire server.
addipban: Bans an ip address <address/mask> <duration, 0=perm>
banaccounts: Bans accounts <name> <duration, 0=perm>
renamechar: Renames character x to y.
forcerenamechar: Forces character x to rename his char next login
getstanding: Gets standing of faction %u.
setstanding: Sets standing of faction %u.

Cheat Commands [m]
cheat: Main cheat command table. Usage: .cheat <subcommand> <args>
status: Shows active cheats.
taxi: Enables all taxi nodes.
cooldown: Enables no cooldown cheat.
casttime: Enables no cast time cheat.
power: Disables mana consumption etc.
god: Sets god mode, prevents you from taking damage.
fly: Sets fly mode
land: Unsets fly mode
explore: Reveals the unexplored parts of the map.
flyspeed: Modifies fly speed.
stack: Enables aura stacking cheat.
morph: Morphs into model id x.
demorph: Demorphs from morphed model.

Honor Modification Commands [m]
honor: Main honor system command table. Usage: .honor <subcommand> <args>
getpvprank: Gets PVP Rank
setpvprank: Sets PVP Rank
addpoints: Adds x amount of honor points/********
addkills: Adds x amount of honor kills
globaldailyupdate: Daily honor field moves
singledailyupdate: Daily honor field moves for selected player only
pvpcredit: Sends PVP credit packet, with specified rank and points

Pet Commands [m]
pet: Main pet command table. Usage: .pet <subcommand> <args>
createpet: Creates a pet with <entry>.
renamepet: Renames a pet to <name>.
enablerename: Enables pet rename.
addspell: Teaches pet <spell>.
removespell: Removes pet spell <spell>.

NPC Commands [n]
npc: Main NPC command table. Usage: .npc <subcommand> <args>
vendoradditem: Adds to vendor
vendorremoveitem: Removes from vendor.
flags: Changes NPC flags
emote: emote - Sets emote state
run: No description entered.
addweapon: No description entered.
allowmove: No description entered.
addgrave: No description entered.
addspirit: No description entered.
faction: No description entered.
delete: Deletes mob from db and world.
info: Displays NPC information
guid: Shows selected object guid
addAgent: .npc addAgent <agent> <procEvent> <procChance> <procCount> <spellId> <spellType> <spelltargetType> <spellCooldown> <floatMisc1> <Misc2>
delAgent: .npc delAgent <procEvent> <spellId>
listAgent: .npc listAgent
reset: resets npc health/dmg from temp table.
export: Exports the npc to a sql file
say: .npc say <text> - Makes selected mob say text <text>.
yell: .npc yell <Text> - Makes selected mob yell text <text>.
come: .npc come - Makes npc move to your position
return: .npc return - Returns ncp to spawnpoint.
spawn: .npc spawn - Spawns npc of entry <id>
spawnlink: .spawnlink sqlentry
resetreputation: .resetreputation - Resets reputation to start levels. (use on characters that were made before reputation fixes.)
resetlevel: .resetlevel - Resets all stats to level 1 of targeted player. DANGEROUS.
resetspells: .resetspells - Resets all spells to starting spells of targeted player. DANGEROUS.
resettalents: .resettalents - Resets all talents of targeted player to that of their current level. DANGEROUS.
resetskills: .resetskills - Resets all skills.

GameObject Commands [o]
gobject: Main gameobject command table. Usage: .gobject <subcommand> <args>
select: Selects the nearest GameObject to you
delete: Deletes selected GameObject
spawn: Spawns a GameObject by ID
info: Gives you informations about selected GO
activate: Activates/Opens the selected GO.
enable: Enables the selected GO for use.
scale: Sets scale of selected GO
animprogress: Sets anim progress
export: Exports the current GO selected
statelink: .statelink sqlentry, Links a GO state to a Npc

Information Commands [p]
gm: Shows active GM's
gps: Shows Position
info: Server info
uptime: Shows server uptime

Teleport (Recall)Commands [q]
recall: Main teleportation command table. Usage: .recall <subcommand> <args>
list: List recall locations
port: Port to recalled location
add: Add recall location
del: Remove a recall location
portplayer: recall ports player

Life and Death Commands [r]
kill: .kill - Kills selected unit.
revive: Revives you.: 0, 0, 0},
reviveplr: Revives player specified.

Save Commands [s]
save: Save's your character
saveall: Save's all playing characters

GM Tag Commands [t]
gmoff: Sets GM tag off
gmon: Sets GM tag on

Universal Commands [u]
Commands: Shows Commands
help: Shows help for command
announce: Sends Msg To All
wannounce: Sends Widescreen Msg To All


Extended Teleport Commands [v]
appear: Teleports to x's position.
summon: Summons x to your position
worldport: No description entered.

Waypoint Commands [w]
waypoint: waypointCommandTable
add: Add wp at current pos
show: Show wp's for creature
hide: Hide wp's for creature
delete: Delete selected wp
movehere: Move to this wp
flags: Wp flags
waittime: Wait time at this wp
emote: Emote at this wp
skin: Skin at this wp
change: Change at this wp
info: Show info for wp
movetype: Movement type at wp
generateNo description entered.Randomly generate wps
save: Save all waypoints
deleteall: Delete all waypoints

Admin Commands [z]
security: No description entered.
servershutdown: Initiates server shutdown in <x> seconds.
serverrestart: Initiates server restart in <x> seconds.
castall: Makes all players online cast spell <x>

Now have fun, make it a good server! if you wish to make it public, look around via this forum and you will find a good one!

[Tropem]

REPOST! ---- There is already a guide on this.. use your eyes

[lilbdiablo12]

His way i had a probelm with, this way i just said i had no problem with, i knew he posted, i posted a fix one that worked for me... pay attention and if you USE YOUR EYES ther are not the same....

[gregzoid2]

i allways get an error when i open
-Ascent-logonserver.exe
-Ascent-world.exe

This error: This application has failed to start because it's side by side configuration is incorrect. Please see the application even log for more detail.

Can any1 help?

[lilbdiablo12]

Thats the .net framework, make sure it is installed if that didnt fix it, redownload the repack

[gregzoid2]

Hm wierd cause i really think i had net framework..anyways im installing it again.

[lilbdiablo12]

After installing, if it still dont work, restart your computer.

[gregzoid2]

well it works now, but i still got an error when i open ascent-world.exe
trying it one more time myself then im posting what error.

E config: >> ascent-realm.conf

[lilbdiablo12]

Hmmm, i wonder if its the one i got last time lol

[lilbdiablo12]

is that all it says?

[Appled]

Add one blank line at end of realms.conf And +2rep for nice guide

[lilbdiablo12]

thanks ^.^

[lilbdiablo12]

bumpin meh forum

[ccoa]

You apples repack link leads to the .NET Framework download...