[Question]Unable to connect to realm server.

[Mike3667]

O.K. Some people may know that I have run around 3 servers all public... with hamachi. I'm trying to make a change so I follow 3 guides I always end up with the same error. I try the wired guides and the wireless guides (I have wireless) I'm sure I'm port forwarding correctly I've port forwarded before. I just don't understand why it's giving me this. If anyone could please help me on MSN or AIM that would be great!
-Mike

[mEtzG3r]

These 3 server from one computer? Or you have 3 servers before ?

[Mike3667]

I've had 3 servers before.

[mEtzG3r]

Ok, i suggest you to do not use hamachi, because its have some serious problem with connections i think, rather search a free domain, and use, because in my mind its simple and easy. I had some server before, and i'm not use hamachi. And this problem -unable to connect realm server- thats from the realms.conf bad configuration or from the hamachi -.- Or with the portforwarding, im not use rooter or something, i just use a firewall.

[Mike3667]

Read it carefully. I said that I am trying out a non-hamachi.

[SoulReaverRaziel]

why dont you use other thing's that hamachi i use gotDNS and so far it hasnt let me down only give's once a month a email.

[Tankotron]

hamachi is MUCH easier than using your own domain though

but if you can figure it out use a domain.. your
players will get a lower ping also

[mEtzG3r]

LoL the own domain is so simple i think ... Im started to making servers with my own domain, and its easy, no connection problem or something

[Mike3667]

Not trying to be rude but. You people dont ****ing get it do you?
I have gotten myself a DSN thing worldofwarcraft.is-a-geek.org
I hook it up. I open all the ports. I allow the ports open through firewall, put it as my realmlist and it tells me it's unable to connect to realm server.
I AM NOT USING HAMACHI. MY FRIEND CANT USE IT ON HIS PC ANYMORE.

[mEtzG3r]

The problem with your router or firewall.

[Equ1N0X]

Not trying to be rude but. You people dont ****ing get it do you?
I have gotten myself a DSN thing worldofwarcraft.is-a-geek.org
I hook it up. I open all the ports. I allow the ports open through firewall, put it as my realmlist and it tells me it's unable to connect to realm server.
I AM NOT USING HAMACHI. MY FRIEND CANT USE IT ON HIS PC ANYMORE.

Disable firewall. now actually go t http://192.168.1.1 or try http://192.168.1.2
there forward the ports as listed in guides. make sure u check start/end ports carefully.

now go ahead and assure that in your confs the remote password matches.

[volitle]

these are my realm list and logonserver files where there is red just put your ip in there

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
* How to use this config file: *
* Config files are in a block->variable->setting format. *
* A < signifies the opening of a block, the block name is expected after that. *
* After the block name, a space and then the settings sperated by = / ' '. *
* *
* e.g. *
* <block setting="0" someval = "1"> *
* *
* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
* of the line, or in shell format (#). *
********************************************************************************/

# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "127.0.0.1"
Username = "root"
Password = "wardy2k6"
Name = "characters"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "your ip here"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "60">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "6739"
MaxBuild = "9999">

# WorldServer Setup
#
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#

<LogonServer RemotePassword = "ascent">



#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
* How to use this config file: *
* Config files are in a block->variable->setting format. *
* A < signifies the opening of a block, the block name is expected after that. *
* After the block name, a space and then the settings sperated by = / ' '. *
* *
* e.g. *
* <block setting="0" someval = "1"> *
* *
* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
* of the line, or in shell format (#). *
********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "your ip here"
Port = "8093"
Name = "characters"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# Colour:
# Realm colour in realm list display.
#
# TimeZone:
# Time zone the realm is in.
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Test server"
Address = "your ip here:8129"
Icon = "PVP"
Colour = "1"
Population = "1.0"
TimeZone = "1">


thats all u need to do is change the red righting in your config files to your ip adress hope this helps

[mEtzG3r]

LOL, Do not disable firewall omg, i have server with firewall and no problems here. I try to forward the ports with these guides and have no luck. I think do not use rooter.

[Mike3667]

Ok checked conf and they are ok. But either way it isnt working for me. I did port foward from there.

[mEtzG3r]

Ok i give up if you dont hear me lol