LAZYBOT support thread, Q&A, requests and updates

[stb1amt]

Post that behavior?

[10:16:13 PM] SendKey: InteractTarget Bar: Indifferent Key: P
[10:16:13 PM] SendKey: Survival Instincts Bar: 3 Key: 8
[10:16:15 PM] SendKey: Mangle Bar: 4 Key: 6

I'd highly doubt a profile should start with Survival Instincts, Barskin yeah but not that

[jumperu]

If the behavior is for Fly gathering, the point of the combat is to end as quick as possible so it can be able to get back to work fast. So it is set to activate all cooldowns when combat starts.

A fast fix for the mangle spam, would be to add a ticker to it. So open combat settings - combat tab .. open mangle spell....add condition - ticker - 4000ms..

- Will take a look at it as well when i get home, mine was working fine though.

[stb1amt]

This problem becoming more and more consistent. Due to the combat bugging i have to manually kill the target otherwise all the char/bot does it just stand there and take damage until dead, this being a problem for me to die since being a druid i automatically regain around 20-30k hp every 5 seconds anyway. I'm running the bot in background like i've always done when watching a program via 2nd screen.

So back to it, without manually killing the target the bot ends up stopping completely unless i do something manually about it even with a check in behavior to see if my char is in combat.

(CombatStart Bar: 1 Key: 2 This is cat form)

[07:37:38] Got into combat with: Ferndweller Wasp
[07:37:38] [Unit]TargetingH: Ferndweller Wasp
[07:37:38] SendKey: InteractWithMouseOver Bar: Indifferent Key: U
[07:37:39] SendKey: InteractTarget Bar: Indifferent Key: P
[07:37:59] Combat took to long, bugged - blacklisting
[07:37:59] Combat done, result : Bugged
[07:37:59] State changed: Mounting
[07:38:10] State changed: Combat
[07:38:10] SendKey: CombatStart Bar: 1 Key: 2
[07:38:11] Started combat engine
[07:38:11] Combat done, result : Bugged
[07:38:11] State changed: Mounting
[07:38:43] Bot stopped

[WYKTM]

This problem becoming more and more consistent. Due to the combat bugging i have to manually kill the target otherwise all the char/bot does it just stand there and take damage until dead, this being a problem for me to die since being a druid i automatically regain around 20-30k hp every 5 seconds anyway. I'm running the bot in background like i've always done when watching a program via 2nd screen.

So back to it, without manually killing the target the bot ends up stopping completely unless i do something manually about it even with a check in behavior to see if my char is in combat.

(CombatStart Bar: 1 Key: 2 This is cat form)

[07:37:38] Got into combat with: Ferndweller Wasp
[07:37:38] [Unit]TargetingH: Ferndweller Wasp
[07:37:38] SendKey: InteractWithMouseOver Bar: Indifferent Key: U
[07:37:39] SendKey: InteractTarget Bar: Indifferent Key: P
[07:37:59] Combat took to long, bugged - blacklisting
[07:37:59] Combat done, result : Bugged
[07:37:59] State changed: Mounting
[07:38:10] State changed: Combat
[07:38:10] SendKey: CombatStart Bar: 1 Key: 2
[07:38:11] Started combat engine
[07:38:11] Combat done, result : Bugged
[07:38:11] State changed: Mounting
[07:38:43] Bot stopped

Don't put anything on BAR 1 -- Every form has a different BAR 1 so when your bot goes into a different form it won't spam the right commands

Use BAR 2 - 6
Keys 1 - 9
Goodluck!

[WYKTM]

Hey Jumperu I was looking at the Druid Fly Behavior and I think that most conditions are set for cat form but yet we rarely go into cat form, for example there is no swipe conditon for when you are in bear form only in cat form.

So that could be one of the reason why I'm only spamming auto attack/mangle

[WYKTM]

My bot is also having issue when it's coming to repairing gear, it gets to the repair vendor and just gets stuck. I currently disabled it so atleast it'll continue botting after but my death ratio is much more increased I'll post a copy of the log soon..

[jumperu]

Hey Jumperu I was looking at the Druid Fly Behavior and I think that most conditions are set for cat form but yet we rarely go into cat form, for example there is no swipe conditon for when you are in bear form only in cat form.

So that could be one of the reason why I'm only spamming auto attack/mangle

Feral Druid MOP FLY2 - by jumperu

Try this 1, i removed a few spells.
And there is no swipe in bear (actually there are 1 or 2spells to be cast in bear form) because it is a feral (cat) behavior. - I only put bear form/surv instincts there only for survivability!

For repair...get the addon AutoRepair... so when bot opens vendor window, it will auto-repair.

[WYKTM]

Feral Druid MOP FLY2 - by jumperu

Try this 1, i removed a few spells.
And there is no swipe in bear (actually there are 1 or 2spells to be cast in bear form) because it is a feral (cat) behavior. - I only put bear form/surv instincts there only for survivability!

For repair...get the addon AutoRepair... so when bot opens vendor window, it will auto-repair.

Gonna test it out and let you know!

Thanks for the quick reply and as always your work is greatly appreciated! =)

[stb1amt]

Don't put anything on BAR 1 -- Every form has a different BAR 1 so when your bot goes into a different form it won't spam the right commands

Use BAR 2 - 6
Keys 1 - 9
Goodluck!

All fly form spells are set to Bar 1 - 1.. My cat form from Fly form is Bar 1 - 2.. Cat form to Fly Form is set to bar 1 - 1.

My Key binds are correct i know how to layout the bot and i know how to bars are formed.

Also flight form does not have a different Bar 1 it's the same as the current one when unformed.

[jumperu]

All fly form spells are set to Bar 1 - 1.. My cat form from Fly form is Bar 1 - 2.. Cat form to Fly Form is set to bar 1 - 1.

My Key binds are correct i know how to layout the bot and i know how to bars are formed.

Also flight form does not have a different Bar 1 it's the same as the current one when unformed.

Pics or it didn't happen!

It does seem ur spells are incorrect placed.

[tylen]

oh yeah, as of repair thing, i accidentally noticed that lb finally supports cyrillic (bow down to charles i guess) so i added repair NPC and couple coords to one of profiles, but yeah, when char comes to NPC he trades that vendor and stays there till disconnect, though he repairs gear fine due to auto repair addon but still that causes afk and dc and i gotta relaunch it manually; finally i disabled repair like i did it earlier :confused:

[stb1amt]

Pics or it didn't happen!

It does seem ur spells are incorrect placed.

Ahaha, you make me laugh Jumperu. Next time it happens i'll print screen for you plan on doing a shed load of mining tonight so may come across the issue again even if i don't i'll let you know :P

And i'll show spells + Placements if it happens again


Decided to do some grinding on my hunter for Skinning, think it should need looking at since it tries to Skin EVERYTHING it kills. I just managed to crash the bot but not to interested in that

[stb1amt]

Huh so i tried out my Shadow Priest with only one fault, the BarMapper wont pick up Mind Flay

[WYKTM]

Anybody been having problem with the bot rezzing? It keeps failing at Spirit Healer

[10:05:39 AM] Started combat engine
[10:05:40 AM] Got into combat with: Kunzen Ravager
[10:05:40 AM] [Unit]TargetingH: Kunzen Ravager
[10:05:55 AM] Combat done, result : Died
[10:05:55 AM] Going to ress
[10:06:14 AM] Going to accept ress sickness
[10:06:18 AM] [Move]I am stuck 0
[10:06:22 AM] [Move]I am stuck 1
[10:06:25 AM] [Move]I am stuck 2
[10:06:30 AM] Approach: Spirit Healer failed
[10:07:04 AM] [Move]I am stuck 0
[10:07:08 AM] [Move]I am stuck 1
[10:07:12 AM] [Move]I am stuck 2
[10:07:15 AM] [Move]I am stuck 3
[10:07:19 AM] Approach: Spirit Healer failed
[10:07:53 AM] [Move]I am stuck 0
[10:07:56 AM] [Move]I am stuck 1
[10:08:04 AM] [Move]I am stuck 2
[10:08:05 AM] Approach: Spirit Healer failed
[10:08:34 AM] Bot stopping: Could not ress.

This happens quite frequently?
Is there anyway to set the bot to use the "Return To Graveyard" button and attempt again because the bot ends up straying too far away to rezz properly

[jumperu]

yes, the problem is that the bot will always try to ress at the last place you died, if u start/stop the bot...
so...quick fix....start the bot and leave it like that ...it will ress fine everytime it dies, if you don't stop it...if u have to stop it...close the bot after and open it again..

quicker fix: get better gear so it won't die! :P