Rogue bot - AutoIt

[Hounro]

Here are the main functions the bot performs:

1) Makes sure you're all healed up (or mostly healed)

2) Runs around in a circle tabbing for monsties

3) Once it finds one, he stops and throws a knife then waits a few secs for the monstie to run to him

4) Uses SS/Evis. to kick the mob's ass until it is dead

5) Equips new throwing knives when you run out (so you can do more than 200 runs at a time)



----------

So here's the code:

----------

Dim $Botting=0

Dim $Walking=0



$Start=IniRead("config_rogue.ini","Whatevs","StartMe","0")

$Stop=IniRead("config_rogue.ini","Whatevs","StopMe","0")

$mx=IniRead("config_rogue.ini","Whatevs","MonsterPixelX","0")

$my=IniRead("config_rogue.ini","Whatevs","MonsterPixelY","0")

$mph=IniRead("config_rogue.ini","Whatevs","MonsterPixelHex","0")

$num=IniRead("config_rogue.ini","Whatevs","NumThrowStacks","0")

$mdx=IniRead("config_rogue.ini","Whatevs","MonsterDetectX","0")

$mdy=IniRead("config_rogue.ini","Whatevs","MonsterDetectY","0")

$mdh=IniRead("config_rogue.ini","Whatevs","MonsterDetectHex","0")

$Heal=IniRead("config_rogue.ini","Heal","UseHeal","0")

$hx=IniRead("config_rogue.ini","Heal","HealPixelX","0")

$hy=IniRead("config_rogue.ini","Heal","HealPixelY","0")

$hph=IniRead("config_rogue.ini","Heal","HealPixelHex","0")

$Attack1=IniRead("config_rogue.ini","Attack","Attack1","0")

$Attack2=IniRead("config_rogue.ini","Attack","Attack2","0")

$AttackThrow=IniRead("config_rogue.ini","Attack","AttackThrow","0")

$Sleep1=IniRead("config_rogue.ini","Attack","Sleep","0")

$SleepAfterThrow=IniRead("config_rogue.ini","Attack","SleepAfterThrow","0")



HotkeySet("{F8}","Debug")

HotkeySet("{" & $Start & "}","StartBot")

HotkeySet("{" & $Stop & "}","StopBot")

HotkeySet("{F7}","Ex")



;----------------------- Main code ---------------------------------------

$n = 0

While $n <= $num



$i = 0

While $i<200

If $Botting=1 Then

While NOT hex(PixelGetColor($hx,$hy),6)=$hph

Sleep(200)

WEnd



Do

If $Botting=1 Then

Walk()

Send("{TAB}")

EndIf

Until hex(PixelGetColor($mx,$my),6)=$mph



If $Botting=1 Then



Attack()

EndIf

Else

$i=0

EndIf

$i=$i+1

WEnd



$n=$n+1

Equip()



WEnd

;---------------------------------------------------------------------------





Func Walk()

If NOT $walking Then

send("{NUMLOCK toggle}")

$walking=1

EndIf

MouseClickDrag("right",187,387,390,317,10)

send("{UP}")

$walking=0

sleep(160+random(40))

EndFunc





Func Attack()

If $walking Then

send("{UP}");

$walking=0

EndIf

If hex(PixelGetColor($mx,$my),6)=$mph THEN

Send($AttackThrow)

Sleep($SleepAfterThrow)

While hex(PixelGetColor($mx,$my),6)=$mph

Send($Attack1)

Sleep($Sleep1)

WEnd

Sleep($Sleep1)

Sleep($Sleep1)

Sleep($Sleep1)

Sleep($Sleep1)

Send($Attack2)

While hex(PixelGetColor($mdx,$mdy),6)=$mdh

Sleep($Sleep1)

Send($Attack1)

WEnd

EndIf

EndFunc



Func Equip()

Send("b")

Sleep(200)

Send("c")

Sleep(200)

If $n=1 Then

MouseClick("left", 683, 445)

Sleep(200)

MouseClick("left", 179, 423)

EndIf

If $n=2 Then

MouseClick("left", 716, 445)

Sleep(200)

MouseClick("left", 179, 423)

EndIf

If $n=3 Then

MouseClick("left", 748, 445)

Sleep(200)

MouseClick("left", 179, 423)

EndIf

If $n=4 Then

MouseClick("left", 782, 445)

Sleep(200)

MouseClick("left", 179, 423)

EndIf

Sleep(200)

Send("{ESC}")

Sleep(200)

EndFunc





Func StartBot()

$Botting=1

EndFunc



Func StopBot()

$Botting=0

If $walking Then

send("{UP}")

$walking=0

EndIf

EndFunc



Func Ex()

ProcessClose("bot_rogue.exe")

EndFunc



Func Debug()

$pos = MouseGetPos()

MsgBox(0, "Debug", "MonsterPixelHex: " & hex(PixelGetColor($mx,$my),6) & " HealPixelHex: " &



hex(PixelGetColor($hx,$hy),6) & " X: " & $pos[0] & " Y: " & $pos[1] & " Hex: " &



hex(PixelGetColor($pos[0],$pos[1]),6))

EndFunc

----------

And this is my config_rogue.ini :

----------

[Whatevs]

StartMe=F5

StopMe=F6

MonsterPixelX=229

MonsterPixelY=69

MonsterPixelHex=00AF00

MonsterDetectX=205

MonsterDetectY=69

MonsterDetectHex=007800

NumThrowStacks=1



[Heal]

UseHeal=1

HealPixelX=138

HealPixelY=69

HealPixelHex=00CD00



[Attack]

Attack1="1"

Attack2="2"

Sleep1=200

AttackThrow="7"

SleepAfterThrow=2000



----------

Now to the explanation. I blocked in the "main code" section, so all the other functions are called either by hotkeys or by that code. To start the bot, just load it up while in an area with monsters and press F5. F6 stops the bot. Oh and I put an emergency exit hotkey (F7) in case anything goes terrribly wrong and the bot starts eating babies or something similar.



Also, let me point out that the HEX of the pixels, and maybe even the pixels themselves (the numerical values) will probably be different for you. You will have the find these yourself, but it should be easy because I have put in a function that will display the hex of the coordinates you put in for MonsterPixelX/Y, MonsterDetectX/Y, and HealPixelX/Y. In addition, this function will display the current corrdinates of the mouse, as well as the hex for that position. The hotkey is F8 for this.



So now I'm going to explain that the variables in the config_rogue.ini are. StartMe and StopMe are obviously the start and stop bot hotkeys. MonsterPixelX, MonsterPixelY, and MonsterPixelHex are the coordinates of the life bar of a monster at around 25% health and the hex associated with that. This is used to detect WHEN to use Eviscerate. MonsterDetectX, MonsterDetectY, and MonsterDetectHex are the coordinates and hex of the monster at the very far left side of the life bar (basically 0 life). This is used to detect WHEN the monster is dead. UseHeal is obvious. HealPixelX, HealPixelY, and HealPixelHex are the coords and hex of YOUR life at whatever health you want to heal to before you go fight another monstie. Just compile the bot like it is, run it, and press F8 over these spots and change the .ini accordingly. Oh, and as for the attack variables.... Attack1 is my SS, Attack2 is my Eviscerate, Sleep is the wait in ms between the attacks, AttackThrow is obviously the number that the knife is set on, and SleepAfterThrow gives the monster time to run up to you once you piss it off. I forgot about one variable, NumThrowStacks. This is how many throw stacks you have IN YOUR BACKPACK. With the way I have it right now, you can have up to 4 extras, starting from the TOP LEFT and filling in the row. Of course, by looking at the code you will be able to see it'll be super-easy to change it if you want.



And here's a little rundown of the bot code: First, it sleeps while your health is lower than the health you set. It's for a rogue, and since my rogue doesn't use food I didn't add it. It would take a whole LINE of code to add a feeding function if you wanted (or a stealth, which would be smart and I was too lazy to do). If you use stealth while healing, make sure to unstealth right after the While loop ends. Ok, next the bot walks then presses TAB until a monstie is found. Once it finds the guy, the attack function is called (mine worked for me, but it should be easy to change should you need to). Also, after 200 mobs have been killed, the bot calls the equip function to equip a new stack of knives to pull with. It's easy to tell what the function does if you check it out.



Ok... I'm almost done. Let me point out, though, that I know if another mob starts attacking you and you kill the other one you're on, you'll just sit there until you die because the heal process will never finish. Also, I know this bot doesn't loot. I didn't feel like writing a looting function because I am just interested in leveling. If someone wants to throw a looting function in there that would be great, just stick it after Attack() or something. Somebody can also throw a little "vanish" feature in there if your life gets too low, that way you will most likely not die in the span of a few hours. One more potential bug: If a monster is ranged, it will not run up to you (DUH!) so you would just stand there wanking yourself. Someone can also add a detection for that and have the rogue walk up if needed.



So finally, if you have never used AutoIt don't be scared. Three days ago I had never looked at AutoIt code before. It's a very easy scripting language to learn. Go here for a download of it (this will also compile the .au3 file to a .exe so you can run it): http://www.hiddensoft.com/autoit3/downloads.php


Source: PMG

NOTE: I havent tested yet

[ragingazn628]

you made this urself if so.. grats +rep... but does this works?

[Hounro]

havent got time to try it out yet since im doing a hunter whit out any hacks/bots, and my cridit card is denied (still wating for a new one from bank)

[JoeRodge]

I turn this on and my character runs around randomly, looking toward the sky.


Maybe you can explain the monster pixel hex a bit better.

[Ced]

I already posted this but nice..

No, he did not make it, its from PMG.

[Hounro]

I already posted this but nice..

No, he did not make it, its from PMG.

yes i got from proflax/pmg and i know that pmg is totaly outdated, but i didt think it wloud be outdated since its a autoit bot, sure you have it setted up the right way as told in the post above?

[piemonkey997]

I downloaded AutoIt but i dont know how to save the code or make it work in WoW. How do i do it?

[Hounro]

PMG IS OUTDATED :P just didt expect this bot to be, but what ever ;P

[koraff]

OK so call me a noob but what do you do with that code too long to fit as a macro obviously so... hows it work /sigh I feel like such an idiot :*(

[SneekyFeet]

I know this is kind of stupid but can it get you banned

[slasherxc5]

Wow man, + rep especially with making this on your own, way to go

[Flying Piggy]

In answer to your question

I know this is kind of stupid but can it get you banned

YES , autoit is old news now and it has no way of hidding from warden so YES again you can and will get banned for using this 100% guranteed .
Sorry to say this even if i thought that the scripting job is very well done but there you have it .