My AV PPather Tasks!

[Y060N]

Here's my AV Alliance for PPather.

Remember, DO NOT AFK this until you have ran it about 5 times - it needs to learn the environment.

It runs around, all the way to Drek for you, and get back up onto the regular path if it falls off a cliff or bridge.

Please post back with results, and remember DO NOT AFK UNTIL YOU HAVE RAN IT AT LEAST 5 TIMES!

Thanks.


HOW TO SET UP:
This guide will walk you through how to download, install, and use a Battleground profile. For the sake of this walk through, I will assume you are going to be using a rogue because it takes the normal amount of setup. (Warriors are the easiest, it is bundled)

Lets jump right into it. First off, download PParrior from:
http://glpontus.tripod.com/PathParrior0.7.3_0.3.zip (Link also found in the first post of the PPather thread.)
When extracting, extract the contents of the folder named "0.7.3 0.3" to your Glider root directory (the folder with your glider executable in it).
The next step is to go to The Pogue Page and set up Pogue like any other custom class. (Skip this step if you have already set up pogue.

If you want to use a different custom class than Pogue, first get the custom class itself and set it up. Once you have done that, get the dll that has already been implemented into PPather at Pather Custom Classes. There, you may have to search on different pages until you find the class you want.

Next, we need to grab the Pathing version of the custom class for pogue. That can be found Here (Also can be grabbed from the first post of the ppather thread). Download this file, and extract the file into your classes folder.

Okay, we are getting close to some of the final steps.
We now have to manually make some of the files and folders that ppather needs to run. In your directory root for glider (folder where glider executable is) make a folder called "pathing2".
Inside the pathing2 folder, we need to make a blank file. This blank file needs to be the name of the character you will be running Ppather on. (no extension).
So to make this file, right click on the explorer window, hover over New and select Text Document. Rename that file with your charachter name, and get rid of whatever extension is there. (You might need to change your explorer settings to display extensions).
Inside your pathing2 file that you made and make another folder called "PvPZone01".
Inside the PvPZone01 folder you just made, you need to make another file that has no extension, called "NPC_Alliance".

After you have done this, download the tasks.psc file that is hosted, and put that inside of your glider root folder.

It is now time to load up the game. Open the game, then open glider. Open the configuration menu, select the classes tab and compile PathPogue. Then go to the main tab and select PathPogue. Now we need to make a macro.

This macro tells PPather what map we are on, so it knows what pathing file to load. To make this macro, open the macro window in WoW and for the script, make it be:

/script ChatFrame1:AddMessage("Zone#" .. GetSubZoneText() .. ":" .. GetZoneText() .."#");

Once you make the macro, put it on one of your hotbars. You now need to add a line to your keys file that allows these custom classes to run the macro.

The line to add to keys should look like:

<Key KeyName="Pather.ContinentMacro" BarState="Bar2" ShiftState="None" Char="0" />

Change the BarState and Char to relate to where your macro is on your hotbar.

Once you are ingame, and inside of the AV cave, make a new profile and skip the wizard. You then need to clikc on "Normal" and add 2 waypoints (can be in the same spot). Then click on "Ghost" and add 1 waypoint.

This profile has nothing to do with pather, glider needs it to be started. Use this (or an already downloaded profile for AV) with Spartacus or BGTool.

We now have ppather completely setup, and need to give it a little bit of in game information. PPather will then load information from WoW's map files, and attempt to start its glide. It will most likely run into a few things on the way there, but don't worry, it is learning where objects are, and it wont run into them again. Keep an eye on it, but it should be just fine at this point.

If you want to use a different custom class than Pogue, that has already been implemented into PPather, go Here.

You are done, and now have a working Rogue using Pontus's pathing system.

So in recap, this is how we install and setup PPather with PathRogue.

1. Download PathParrior from: http://glpontus.tripod.com/PathParrior0.7.3_0.3.zip
2. Extract contents to Glider Root
3. Download and setup Pogue from:Here
4. Grab PathPogue from: Here
5. Make the folder "pathing2" in your folder root, and an empty file with no extension of the name of your charachter that you will be gliding on inside pathing2
6. Inside pathing 2 folder, make another folder named "PvPZone01".
7. Inside the "PvPZone01" folder, make a file that has no extension called "NPC_Alliance".
8. Save tasks.psc and put it in the Glider folder.
9. Open the game
10. Compile PathPogue
11. Create the macro for zone text
12. Add the line into keys.xml for that macro
13. Watch for problems.

Everything should work correctly now!

_________________________________
This was also an edited version of How to set up and install PPather, so go there for more help.

I can also help you on vent under the name Box, as long as you have read this thread.

To make this queue for you, you MUST have ppather.dll and a restarter!

Tasks File:

  When
{
     =  < 71;

Seq
{

If
   {
        =  == "Darnassus";
       
        Par 
        {
            BGQueue
            {
             = 1;
             = "Brogun Stoneshield";
             = "Alterac Valley";
            }
            
            Wait 
            { 
             = 2; 
            }
            
        }
    }

If
{
     =  == "Alterac Valley";

  Par
  {
       =  - 10; 
       =  + 1; 
     
       Defend
      {  
         = 0;
      }
    
      Danger
      {  
         = 1;
         = 30;
     = 30;
      }

       Pull 
       { 
        = 1; 
        = [1610,2,6,116,5,70,1629]; 
       }
 
       Hotspots 
       {
         = 2;
         = "Random";
         = [
        [ 666.3, -296.3, 30.3],
        [ 393.0, -394.7, -1.0],
        [ 220.0, -415.1, 40.4],
        [ 76.5, -395.2, 45.1],
        [ 24.6, -296.3, 14.5],
        [ -496.2, -187.9, 57.4],
        [ -622.3, -394.4, 58.9],
        [ -1205.7, -255.4, 72.5],
        [ -1349.3, -298.0, 91.2]];
       }
      
     
  }
}

}
}

To make that properly work, you have to put it into a notepad file and save it as "tasks.psc" and put it into your glider root directory.

_________________________________

If you do not have a glider forum account, please post what custom class you want to work with PPather - and I will update it for you.

Thanks for reading, please post feedback!

[Y060N]

If anyone needs help with pather, or setting up pather tell me.

[Y060N]

No problem

[gangstas]

Hey , could you give me a hand on getting Ppather to warlock? i need a small intro to it :S, +Rep if you help me out ^^

[MentalAssault]

I'll try to set it up on my own, if not I'll pm you.

[kasualhustler]

Wow very nice

[hobart]

does this que for you?

[Y060N]

If you need help, throw me a PM. As for que - no, it doesn't right now, but I will upload the code that may make it work.

[zips]

need horde side!

[okkies]

tried it but all it does for me run around in the cave abit and after +- 4 min its out and still doing the same untill it reaches the gy downthere when horde will be waiting .........

so wtf im doin wrong :P?

[Deep]

me to okkies