[Guide] the config files menu

These ads disappear when you log in.

Results 1 to 4 of 4
  1. #1
    Viter's Avatar Elite User
    Reputation
    410
    Join Date
    Aug 2007
    Posts
    2,154
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    [Guide] the config files

    HI alot of ppl have problems with their config files
    so this is my guide how to edit your config files.

    We will start with realms.conf

    Code:
    #######################################################################
    # Ascent Realms Configuration File
    # Last updated at revision 446 by Burlex
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    #    Address:
    #        The address (no port) of the server.
    #
    #    Port:
    #        The port on which the logon server listens. (*** NOT 3724 ***)
    #
    #    Name:
    #        Not really relavant, but name the logon.
    #
    #    RealmCount:
    #        The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "IP HERE"
                 Port = "8093"
                 Name = "Default Logon"
                 RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    #    Name:
    #        The name of the realm.
    #    
    #    Address:
    #        The address (and port) of that realm.
    #
    #    Icon:
    #        The type of realm (PVP, Normal, RPPVP, RP)
    #
    #    Colour:
    #        Realm colour in realm list display.
    #
    #    TimeZone:
    #        Time zone the realm is in.
    #
    #    Population:
    #        (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "realm name here"
            Address = "IP here:8129"
            Icon = "PVP"
            Colour = "1"
            Population = "1.0"
            TimeZone = "1">
    logonserver.conf:

    Code:
      #######################################################################
    # Ascent Realms Configuration File
    # Last updated at revision 446 by Burlex
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    # LogonDatabase Section
    #
    #    These directives are the location of the `realms` and `accounts`
    #    tables.
    #
    #    LogonDatabase.Host      - The hostname that the database is located on
    #    LogonDatabase.Username  - The username used for the mysql connection
    #    LogonDatabase.Password  - The password used for the mysql connection
    #    LogonDatabase.Name      - The database name
    #    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
    #    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #
    
    <LogonDatabase Hostname = "localhost"
                   Username = "SQL USER"
                   Password = "SQL PASS"
                   Name     = "DATABASE"
                   Port     = "3306"
                   Type     = "1">
    
    
    # Host Directive
    #
    #    This is the address that the realmlist will listen on.
    #    To listen on all addresses, set it to 0.0.0.0
    #    Default: 127.0.0.1 (localhost)
    #
    #    Note: ISHost is the interserver communication listener.
    #
    
    <Listen Host = "IP HERE"
            ISHost = "IP HERE"
            RealmListPort = "3724"
            ServerPort = "8093">
    
    # Server console logging level
    #
    #    This directive controls how much output the server will
    #    display in it's console. Set to 0 for none.
    #    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #    Default: 3
    #
    
    <LogLevel Screen = "0"
              File = "-1">
    
    # Account Refresh Time
    #
    #    This controls on which time interval accounts gets 
    #    refreshed. (In seconds)
    #    Default = 600
    #
    
    <Rates AccountRefresh = "600">
    
    # Accepted Build Range Setup
    #
    #    These two directives set up which clients will be
    #    allowed to authenticate with the realm list.
    #
    #    Set these to the same builds that the server was
    #    compiled for.
    #
    #    As of the last update, version 2.1.1 was build 6739.
    #
    
    <Client MinBuild = "7000"
            MaxBuild = "8000">
    
    # WorldServer Setup
    #
    #    This directive controls the password used to authenticate with the worldserver.
    #    It must be the same between the two configs. If it is not, your server will
    #    not register.
    #
    #    Default: "change_me_logon"
    #
    
    <LogonServer RemotePassword = "PASS">
    ascent.conf

    Code:
      #######################################################################
    # Ascent Configuration File
    # Last Update: : ascent.conf 2449 2007-11-27 03:38:11Z burlex $
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    #   Database.Host      - The hostname that the database is located on
    #   Database.Username  - The username used for the mysql connection
    #   Database.Password  - The password used for the mysql connection
    #   Database.Name      - The database name
    #   Database.Port      - Port that MySQL listens on. Usually 3306.
    #   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <WorldDatabase Hostname = "localhost" Username = "username" Password = "sql password" Name = "database" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "username" Password = "sql password" Name = "database" Port = "3306" Type = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    #    Host
    #        This is the address that the server will listen on.
    #        To listen on all addresses, set it to 0.0.0.0
    #        Default: 127.0.0.1 (localhost)
    #
    #    WorldServerPort
    #        This is the port that the world server listens on.
    #        It has to be the same as what is specified in the
    #        realms table in the LogonDatabase.
    #        Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Listen Host = "IP HERE"
            WorldServerPort = "8129">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    #    Console Logging Level
    #        This directive controls how much output the server will
    #        display in it's console. Set to 0 for none, or -1 to disable.
    #        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #        Default: 3
    #
    #    World server packet logging feature
    #        If this directive is turned on, a file called `world.log`
    #        will be created in the server's directory and all packets
    #        sent and received by clients will be dumped here in bfg
    #        format.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogLevel Screen="0" File="-1" World="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Server Settings
    #
    #    PlayerLimit
    #        This directive controls the amount of sessions that will be
    #        accepted by the server before it starts to add people to 
    #        the server queue.
    #        Default: 100
    #
    #    Motd
    #        This message will be displayed by the server in the chat
    #        box every time any user logs on. Colors can be used in the
    #        standard WoW format.
    #        Default: "No MOTD specified
    #
    #    Send Build On Join
    #        This directive controls whether the server's internal revision
    #        will be sent to clients upon entering the world. Use it to help
    #        testers report bugs.
    #
    #    Send Stats On Join
    #        This directive controls whether the server will send the online player
    #        count to a cilent when it enters the world.
    #
    #    Breathing Setup
    #        If the breathing code is causing problems or you want to run a fun server, you can disable 
    #        water checks by enabling this directive.
    #        Default: 1
    #
    #    Level Cap
    #        This variable controls the level that stats will be generated up to internally.
    #        Beyond this level players can still see a higher level visually but their stats won't
    #        increase beyond this point.
    #        Default: 70
    #
    #    Generated Level Level Cap
    #       This variable controls the level at which stats will generate up to. Generally the formulas go
    #       crazy after level 70 so this way you can keep the high visual but stats at a reasonable value.
    #       Default: 70
    #
    #    Seperate Channels Control
    #        This directive controls whether horde and alliance chats will be seperated across channels.
    #        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    #        across channels.
    #        Default: 0
    #
    #    Compression Threshold
    #        This directive controls the limit when update packets will be compressed using deflate.
    #        For lower-bandwidth servers use a lower value at the cost of cpu time.
    #        Default: 1000
    #
    #    Queue Update Rate
    #        This directive controls how many milliseconds (ms) between the updates
    #        that the queued players receieve telling them their position in the queue.
    #        Default: 5000 (5 seconds).
    #
    #    Kick AFK Players
    #        Time in milliseconds (ms) that a player will be kicked after they go afk.
    #        Default: 0 (disabled)
    #
    #    Connection Timeout
    #        This directive specifies the amount of seconds that the client will be disconnected
    #        after if no ping packet is sent. It is advised to leave it at the default.
    #        Default: 180
    #
    #    Realm Type
    #        This is the realm type that will be used by the server to handle world pvp.
    #        Default: 0 (pve)(RPPVE)
    #        Other values: 1(pvp)(RPPVP)
    #
    #    AdjustPriority
    #        Set the server to high process priority?
    #        Default: 0
    #
    #    RequireAllSignatures
    #        This directive controls whether the full 10 signatures will be required in order
    #        to turn in a petition. Smaller servers would be better off having it turned off.
    #        Default: off
    #
    #    ShowGMInWhoList
    #        This directive controls whether GM's will be shown in player's who lists or not.
    #        Default: on
    #
    #    MapUnloadTime
    #        This directive controls whether to unload map cells after an idle period of <x> seconds.
    #        Use on smaller servers or servers that are memory-limited. The server without cell unloading
    #        can use over 1.2GB memory with all creatures loaded.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Server PlayerLimit = "100"
            Motd = "Viters Asent Compiles"        
            SendBuildOnJoin = "1"
            SendStatsOnJoin = "1"
            EnableBreathing = "1"
            LevelCap = "70"
            GenLevelCap = "70"
            SeperateChatChannels = "0"
            CompressionThreshold = "1000"
            QueueUpdateInterval = "5000"
            KickAFKPlayers = "0"
            ConnectionTimeout = "180"
            RealmType = "1"
            AdjustPriority = "0"
            RequireAllSignatures = "0"
            ShowGMInWhoList = "1"
            MapUnloadTime="0">
    
    
    
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    # 
    #    These directives set up the multiplier in which regen values will be
    #    multiplied by every 2 seconds.
    #    Powers: 
    #        Power1 = Mana, Power2 = Rage, Power3 = Energy
    #    
    #    Reputation:
    #        Kill = Rep gained on kill, Quest = rep gained from quests
    #
    #    Honor:
    #        Honor = multiplier used to calculate honor per-kill.
    #
    #    PvP:
    #        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #
    #    XP:
    #        The xp that a player receives from killing a creature will be multiplied
    #        by this value in order to get his xp gain.
    #
    #    RestXP: 
    #        Value is the amount of rest XP a player will recieve per minute of rest time.
    #
    #    Drop(Color):
    #        These values will be multiplied by the drop percentages of the items for creatures
    #        to determine which items to drop. All default to 1.
    #        To allow you better control of drops, separate multipliers have been created for items 
    #        of each quality group. 
    #
    #    DropMoney:
    #        This value will be multiplied by any gold looted and pickpocketed
    #
    #    Save:
    #        Value in milliseconds (ms) that will be between player autosaves.
    #        Default: 300000 (5 minutes)
    # 
    #    SkillChance:
    #        The chance that you have to level up a skill in melee or a profession is multiplied
    #        by this value.
    #        Default: 1
    #
    #    SkillRate:
    #        The amount of "levels" your skill goes up each time you gain a level is multiplied
    #        by this value.
    #
    #    ArenaMultiplier
    #         Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Rates Health="1"
           Power1="1"
           Power2="1"
           Power3="1"
           QuestReputation="1"
           KillReputation="1"
           Honor="1"
           PvPTimer="300000"
           Compression="1"
           XP="1"
           QuestXP="1"
           RestXP="1"
           DropGrey="1"
           DropWhite="1"
           DropGreen="1"
           DropBlue="1"
           DropPurple="1"
           DropOrange="1"
           DropArtifact="1"
           DropMoney="1"
           Save="300000"
           SkillChance="1"
           SkillRate="1"
           ArenaMultiplier2x="1"
           ArenaMultiplier3x="1"
           ArenaMultiplier5x="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    #   This should be set to 'gm_sync_channel' for the My_Master addon to work.
    #   Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain Configuration
    #
    #   Set the path to the map_xx.bin files and whether unloading should be enabled
    #   for the main world maps here. Unloading the main world maps when they go idle
    #   can save a great amount of memory if the cells aren't being activated/idled
    #   often. Instance/Non-main maps will not be unloaded ever.
    #
    #   Default:
    #      MapPath = "maps"
    #      UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Terrain MapPath = "maps" UnloadMaps = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    # 
    #    Cheaters:
    #        This directive sets up the cheater logging file, if turned on any
    #        cheat / packet exploit / speedhack attempts will be logged here.
    #
    #    GMCommands:
    #        These two directives set up the GM command logging fie. If turned on,
    #        most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Log Cheaters="0" GMCommands="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    #    These directives control the limits and behaviour of the ingame mail system.
    #    All options must have Mail prefixed before them.
    #   
    #    ReloadDelay                 
    #        Controls the delay at which the database is "refreshed". Use it if you're
    #        inserting mail from an external source, such as a web-based interface.
    #        0 turns it off.
    #        Default: 0
    #
    #    DisablePostageCostsForGM 
    #        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    #        Default: 1
    #
    #    DisablePostageCosts
    #        Disables postage costs for all players.
    #        Default: 0
    #
    #    DisablePostageDelayItems
    #        Disables the one hour wait time when sending mail with items attached.
    #        Default: 1
    #
    #    DisableMessageExpiry
    #        Turns off the 30 day / 3 day after read message expiry time. 
    #        WARNING: A mailbox still cannot show more than 50 items at once
    #        (stupid limitation in client).
    #        Default: 0
    #
    #    EnableInterfactionMail
    #        Removes the faction limitation for sending mail messages. Applies to all players.
    #        Default: 1
    #
    #    EnableInterfactionMailForGM 
    #        Removes the faction limitation for sending mail messages, but only applies
    #        to GM's. EnableInterfactionMail overrides this.
    #        Default: 1
    #   
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Mail ReloadDelay="0"
          DisablePostageCostsForGM="1"
          DisablePostageCosts="0"
          DisablePostageDelayItems="1"
          DisableMessageExpiry="0"
          EnableInterfactionMail="1"
          EnableInterfactionMailForGM="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    #        These directives set up the status dumper plugin. Filename is an
    #        absolute or relative path to the server binary. Interval is the
    #        time that the stats will be dumped to xml.
    #        Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <StatDumper FileName = "stats.xml" Interval = "120000">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    #    Preloading
    #        This directive controls whether the entire world will be spawned at server
    #        startup or on demand. It is advised to leave it disabled unless you are a
    #        developer doing testing.
    #        Default: off
    #
    #    Background Loot Loading
    #        This directive controls whether loot will be loaded progressively during
    #        startup or in the background in a seperate thread. Turning it on will
    #        result in much faster startup times.
    #        Default: on
    #
    #    Multithreaded Startup
    #        This controls whether the server will spawn multiple worker threads to
    #        use for loading the database and starting the server. Turning it on
    #        increases the speed at which it starts up for each additional cpu in your
    #        computer.
    #        Default: on
    #
    #    Additional Table Binding
    #        You can load static item/creature/etc data into the server using this directive.
    #        This way throughout database updates your custom data can be preserved.
    #        Format: "sourcetable destination table,sourcetable destinationtable"
    #        Example: "myitems items,mynpcs creature_names"
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Startup Preloading = "0"
             BackgroundLootLoading = "1"
             EnableMultithreadedLoading = "1"
             LoadAdditionalTables="">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    #    Lines
    #        This is the number of "messages" or lines that it will allow before stopping messages from
    #        being sent. This counter is reset every "Seconds" seconds.
    #        Default: 0 (disabled)
    #
    #    Seconds
    #        This is the number of seconds inbetween the Line counter being reset.
    #        Default: 0 (disabled)
    #
    #    SendMessage
    #        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    #        message will be sent upon flood triggering.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    #    DisablePings   
    #        This directive controls whether pings will be sent to the logonserver to check
    #        if the connection is still "alive". Expect problems if it is disabled.
    #        Default: 0
    #
    #    RemotePassword
    #        This directive controls the password used to authenticate with the logonserver.
    #        It must be the same between the two configs. If it is not, your server will
    #        not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer DisablePings = "0"
                 RemotePassword = "PASS">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    #    Teleport   
    #        This directive controls anti-teleport hack checks will be enabled or not.
    #        Default: 1
    #
    #    Speed
    #        This directive controls anti-speed hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    FallDamage
    #        This directive controls anti-fall damage hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    Flying
    #        This directive controls whether flight hacks will be performed on players or not.
    #        Default: 1
    #
    #    DisableOnGM
    #        This directive controls hack checks will be disabled for GM's or not.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AntiHack Teleport="1"
              Speed="1"
              FallDamage="1"
              Flying="1"
              DisableOnGM="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    #    These are the periods that the server will wait before doing periodic duties. At the moment only
    #    arena point calculation and honor point calculation are used here.
    #
    #    Default:
    #         Arena: weekly
    #         Honor: daily
    #             (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Periods HonorUpdate="daily"
             ArenaUpdate="weekly">
             
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AscentStats Setup                *** PRIVACY NOTE: READ ME CAREFULLY ***
    #
    #    These are the values that the AscentStats client uses while communicating with an AscentStats server.
    #    Statistics will be sent anonymously if a server guid is not set.
    #    If you do not want your ascent client communicating with AscentStats servers, disable it here.
    #    No personally-identifiable information is sent in these transmissions. The actual data sent is:-
    #      stats=Ascent|PLATFORM|CONFIG|ARCH|REV|PLAYER|QUEUE|ALLIANCE|HORDE|AVGLAT|PEAK
    #
    #    If you don't mind your server transmitting this information, please leave AscentStats enabled. It
    #    allows our developers to understand our users needs better and in the end provide you with a better
    #    product.
    #
    #    Enable
    #         To disable stat transmission completely, set this to 0.
    #
    #    ServerGUID
    #         This is the GUID assigned to your server by the AscentStats server. To register your server, go
    #         to http://www.example.com/ascentstats/register_server.php
    #
    #    ServerKey
    #         This is the key used to secure stats sent by your server so they can't be forged. This key is
    #         obtained after registering your server.
    #
    #    Default:
    #         Enabled
    #         Server Key "NONE"
    #         Server GUID "NONE"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AscentStats Enable="1"
                 ServerGUID="NONE"
                 ServerKey="NONE">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    #    These directives control some of the aspects in the channel system.
    #
    #    BannedChannels
    #         If you would like to ban users from creating or joining a channel specify them here in a ';'
    #         seperated list.
    #         Default: ""
    #
    #    GeneralChannels
    #         These are the default channels that the client joins and cannot have leaders.
    #         Default: "General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Channels BannedChannels=""
              GeneralChannels="General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    #    These directives control some of the aspects in the voice chat system.
    #
    #    Enabled
    #         If you want to enable the voice chat system, this must be set to 1.
    #         Default: "0"
    #
    #    ServerIP
    #         This is the IP of the voice chat server.
    #         Default: "127.0.0.1"
    #
    #    ServerPort
    #         This is the TCP port of the voice chat server.
    #         Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <VoiceChat Enabled="0"
               ServerIP="127.0.0.1"
               ServerPort="3727">
    
              
    
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    #    LocaleBindings
    #        This is a list of locale names and the other locale you want to associate with them.
    #        For example, to make the European client always use the french language, "enGB=frFR"
    #
    #        Must be terminated by a space.
    #
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Localization LocaleBindings="(SPACE)=nothing here :)">
    and if you are too lazy to edit config files then do this:
    get my ascent compiles.
    copy the .conf files into your repack.
    change mysql pass to ascent.
    Last edited by Viter; 12-21-2007 at 08:39 AM.



    These ads disappear when you log in.

  2. #2
    Skozzan's Avatar Master Sergeant
    Reputation
    13
    Join Date
    Dec 2007
    Posts
    80
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    The only MySQL name is root.. if you aren't hosting it on some other internet server..

  3. #3
    Viter's Avatar Elite User
    Reputation
    410
    Join Date
    Aug 2007
    Posts
    2,154
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Originally Posted by Skozzan View Post
    The only MySQL name is root.. if you aren't hosting it on some other internet server..
    but what if someone do?



  4. #4
    Loopee's Avatar Private
    Reputation
    1
    Join Date
    Dec 2007
    Posts
    2
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    the .conf's

    Hey i need some help here. first i will say you cant just put in you external ip adress all over the confs it doesent work!

    i did what you told me in the guide i just doesent work when i open logonserver it crashes...

Similar Threads

  1. [Guide] Editing the Config Files!
    By Mango Jerry in forum WoW EMU Guides & Tutorials
    Replies: 19
    Last Post: 05-05-2009, 05:09 PM
  2. How to Renew the mpq files [Picture Guide]
    By Dytag in forum WoW ME Tools & Guides
    Replies: 6
    Last Post: 01-05-2009, 12:31 AM
  3. [Guide] Setting up your config files
    By Sabens in forum WoW EMU Guides & Tutorials
    Replies: 4
    Last Post: 09-24-2008, 08:29 PM
  4. [Guide] How to config your Config Files [dyndns way]
    By pennybox in forum WoW EMU Guides & Tutorials
    Replies: 0
    Last Post: 06-08-2008, 02:43 AM
  5. Ascent config file guide
    By Viter in forum World of Warcraft General
    Replies: 4
    Last Post: 10-31-2007, 07:45 AM
All times are GMT -5. The time now is 06:46 PM. Powered by vBulletin® Version 4.2.3
Copyright © 2018 vBulletin Solutions, Inc. All rights reserved. Digital Point modules: Sphinx-based search