[Guide]ArcEmu 3.0.3 Wotlk Private Server (EASY!) menu

These ads disappear when you log in.

Page 1 of 4 1234 LastLast
Results 1 to 15 of 51
  1. #1
    lillfjanten's Avatar Corporal
    Reputation
    8
    Join Date
    Nov 2008
    Posts
    17
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)

    [Guide]Setup a ArcEmu 100% Wotlk 3.0.3 Server[VERY EASY]

    Hello, i have edit this guide and this is WAY Better, mates ! Credits will be at the end of the Tut/Guide.

    -->**NEEDED DOWNLOADS!!!**<--
    NET FRAMEWORK 3.5
    http://www.microsoft.com/downloads/d...E52-4E35-B531-

    T3h Greates Repack In the F***ing WORLD !!!
    ArcEmu Blizzlike V11.exe

    First Download it and install it to C:\! (VERY IMPORTANT)
    Then go to your Config folder, and thoose Config files, open it with Notepad.

    First Open arcemu-realms.conf with Notepad

    Code:
    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision rev.1875
    #######################################################################
    
    #********************************************************************************
    #* How to use this config file:                                                 *
    #* Config files are in a block->variable->setting format.                       *
    #* A < signifies the opening of a block, the block name is expected after that. * 
    #* After the block name, a space and then the settings sperated by = / ' '.     *
    #*                                                                              *
    #* e.g.                                                                         *
    #* <block setting="0" someval = "1">                                            *
    #*                                                                              *
    #* Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
    #* of the line, or in shell format (#).                                         *
    #********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    #    Address:
    #      The address (no port) of the server.
    #
    #    Port:
    #      The port on which the logon server listens. (*** NOT 3724 ***)
    #
    #    Name:
    #      Not really relavant, but name the logon.
    #
    #    RealmCount:
    #      The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "127.0.0.1"
    	Port = "8093"
    	Name = "Default Logon"
    	RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    #    Name:
    #      The name of the realm.
    #    
    #    Address:
    #      The address (and port) of that realm.
    #
    #    Icon:
    #      The type of realm (PVP, Normal, RPPVP, RP)
    #
    #    TimeZone:
    #      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
    #       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
    #
    #    Population:
    #      (0 = low, 1 = medium, 2 = high)
    #
    #   Important information below
    #
    #     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
    #     This issues come up a lot!
    #
    # 	Timezone values :
    #	0=Korean				16=China
    #	1=Development				17=CN1
    #	2=United States				18=CN2
    #	3=Oceanic				19=CN3
    #	4=Latin America				20=CN4
    #	5=Tournament				21=CN5
    #	6=Korean				22=CN6
    #	8=English				23=CN7
    #	9=German				24=CN8
    #	10=French				25=Tournament
    #	11=Spanish				26=Test Server
    #	12=Russian				27=Tournament
    #	13=Tournament				28=QA Server
    #	14=Taiwan				29=CN9
    #	15=Tournament				30=TestServer2
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "Whatever you want"
    	Address = "127.0.0.1:8129" 
    	Icon = "PVP"
    	Population = "1.0"
    	TimeZone = "1">
    Blue = Change if Needed. Color Red = Change !
    IF you want your server to be public ! Change the blue text to your Hostname OR your Hamachi IP !! But if just YOU gonna play on it. (NON-PUBLIC) Its going to be your localhost ip.. 127.0.0.1 [LEAVE THE PORT NUMBER THAT IS COLORED PINK]

    This is Optional ! But recommended, lolz
    Open arcemu-world.conf with Notepad and Scroll Down untill you see the Blue or Red text ! [OBS: SCROLL DOWN!!!!!]

    Code:
    #######################################################################
    # ArcEmu Configuration File
    # Last Update: $Id: arcemu-world.conf rev.1875
    #######################################################################
    
    #/********************************************************************************
    # * How to use this config file:                                                 *
    # * Config files are in a block->variable->setting format.                       *
    # * A < signifies the opening of a block, the block name is expected after that. * 
    # * After the block name, a space and then the settings sperated by = / ' '.     *
    # *                                                                              *
    # * e.g.                                                                         *
    # * <block setting="0" someval = "1">                                            *
    # *                                                                              *
    # * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
    # * of the line, or in shell format (#).                                         *
    # ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    #   Database.Host      - The hostname that the database is located on
    #   Database.Username  - The username used for the mysql connection
    #   Database.Password  - The password used for the mysql connection
    #   Database.Name      - The database name
    #   Database.Port      - Port that MySQL listens on. Usually 3306.
    #   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "World" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "Characters" Port = "3306" Type = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    #    Host
    #        This is the address that the server will listen on.
    #        To listen on all addresses, set it to 0.0.0.0
    #        Default: 127.0.0.1 (localhost)
    #
    #    WorldServerPort
    #        This is the port that the world server listens on.
    #        It has to be the same as what is specified in the
    #        realms table in the LogonDatabase.
    #        Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Listen Host = "0.0.0.0"
            WorldServerPort = "8129">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    #    Console Logging Level
    #        This directive controls how much output the server will
    #        display in it's console. Set to 0 for none, or -1 to disable.
    #        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #        Default: 3
    #
    #    World server packet logging feature
    #        If this directive is turned on, a file called `world.log`
    #        will be created in the server's directory and all packets
    #        sent and received by clients will be dumped here in bfg
    #        format.
    #        Default: 0
    #
    #    DisableCrashdumpReport
    #        Disables crashdump reports, else if the build has debugging enabled, 
    #        arcemu-world will call ./arcemu-crashreport every time it starts, so 
    #        if there is a core, a crashdump will automatically be reported 
    #        to the tracker at sf.net
    #        Needs gdb and curl
    #        Linux only
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Server Settings
    #
    #    PlayerLimit
    #        This directive controls the amount of sessions that will be
    #        accepted by the server before it starts to add people to 
    #        the server queue.
    #        Default: 100
    #
    #    Motd
    #        This message will be displayed by the server in the chat
    #        box every time any user logs on. Colors can be used in the
    #        standard WoW format.
    #        Default: "No MOTD specified
    #
    #    Send Stats On Join
    #        This directive controls whether the server will send the online player
    #        count to a cilent when it enters the world.
    #
    #    Breathing Setup
    #        If the breathing code is causing problems or you want to run a fun server, you can disable 
    #        water checks by enabling this directive.
    #        Default: 1
    #
    #    Seperate Channels Control
    #        This directive controls whether horde and alliance chats will be seperated across channels.
    #        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    #        across channels.
    #        Default: 0
    #
    #    Compression Threshold
    #        This directive controls the limit when update packets will be compressed using deflate.
    #        For lower-bandwidth servers use a lower value at the cost of cpu time.
    #        Default: 1000
    #
    #    Queue Update Rate
    #        This directive controls how many milliseconds (ms) between the updates
    #        that the queued players receieve telling them their position in the queue.
    #        Default: 5000 (5 seconds).
    #
    #    Kick AFK Players
    #        Time in milliseconds (ms) that a player will be kicked after they go afk.
    #        Default: 0 (disabled)
    #
    #    Connection Timeout
    #        This directive specifies the amount of seconds that the client will be disconnected
    #        after if no ping packet is sent. It is advised to leave it at the default.
    #        Default: 180
    #
    #    Realm Type
    #        This is the realm type that will be used by the server to handle world pvp.
    #        Default: 0 (pve)(RPPVE)
    #        Other values: 1(pvp)(RPPVP)
    #
    #    AdjustPriority
    #        Set the server to high process priority?
    #        Default: 0
    #
    #    RequireAllSignatures
    #        This directive controls whether the full 10 signatures will be required in order
    #        to turn in a petition. Smaller servers would be better off having it turned off.
    #        Default: off
    #
    #    ShowGMInWhoList
    #        This directive controls whether GM's will be shown in player's who lists or not.
    #        Default: on
    #
    #    MapUnloadTime
    #        This directive controls whether to unload map cells after an idle period of <x> seconds.
    #        Use on smaller servers or servers that are memory-limited. The server without cell unloading
    #        can use over 1.2GB memory with all creatures loaded.
    #        Default: 0
    #
    #    LimitedNames
    #        This directive forces all character names to be a-z and A-Z compliant.
    #        Default: 1
    #
    #    UseAccountData
    #        This directive determines whether the account_data table is used to save custom client data.
    #        May cause buggy behaviour.
    #        Default: 0
    #
    #    AllowPlayerCommands
    #        This directive, if enabled can allow players to use commands with a '0' command group.
    #        Default: 0
    #
    #    EnableLFGJoin
    #        If this is enabled, you can join the LFG channel without using the LFG tool.
    #        Default: 0
    #
    #    TimeZone
    #        Set your local timezone relative to GMT here.
    #        Default: 0
    #
    #    Collision
    #        Enable collision system (LoS checks).
    #        Default: 0
    #	 Make sure you have collision.dll in the same folder as arcemu-world!
    #
    #    DisableFearMovement (In Battlegrounds and Arenas only!)
    #        Disable fear movement in arenas & battlegrounds. 
    #        Recommended if you do not have collision enabled!
    #        Default: 0 (off) Not blizzlike
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Server PlayerLimit = "999"
            Motd = "Whatever you want"
            SendStatsOnJoin = "1"
            EnableBreathing = "1"
            SeperateChatChannels = "0"
            CompressionThreshold = "1000"
            QueueUpdateInterval = "5000"
            KickAFKPlayers = "0"
            ConnectionTimeout = "180"
            RealmType = "1"
            AdjustPriority = "0"
            RequireAllSignatures = "0"
            ShowGMInWhoList = "1"
            MapUnloadTime="0"
            LimitedNames="1"
            UseAccountData="0"
            AllowPlayerCommands="0"
            EnableLFGJoin="0"
            TimeZone="0"
            Collision="0"
            DisableFearMovement="0">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Announce Configuration
    #
    #    Tag
    #      Configure what is shown in front of your announces in the [] brackets.
    #      Default: Staff (would give [Staff])
    #
    #    GMAdminTag
    #      Configure whether the <GM> or <Admin> tag is shown in announces.
    #      Default: 0 (disabled)
    #
    #    NameinAnnounce
    #      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
    #      Default: 1 (enabled)
    #
    #    NameinWAnnounce
    #      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
    #      of the message.
    #      Default: 1 (enabled)
    #
    #    ShowInConsole
    #      This controls whether announces are shown in the arcemu-world console or not.
    #      This does not apply for the team-internal GM announce.
    #      Default: 1 (enabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Announce       Tag = "Staff"
                    GMAdminTag = "0" 1 = The Tag "Staff" is going to be showed if u talk.
                    NameinAnnounce = "1"
                    NameinWAnnounce = "1"
                    ShowInConsole = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    # 
    #    These directives set up the multiplier in which regen values will be
    #    multiplied by every 2 seconds.
    #    Powers: 
    #        Power1 = Mana, Power2 = Rage, Power3 = Energy
    #    
    #    Reputation:
    #        Kill = Rep gained on kill, Quest = rep gained from quests
    #
    #    Honor:
    #        Honor = multiplier used to calculate honor per-kill.
    #
    #    PvP:
    #        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
    #
    #    XP:
    #        The xp that a player receives from killing a creature will be multiplied
    #        by this value in order to get his xp gain.
    #
    #    RestXP: 
    #        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    #        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    #        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
    #        Note that resting in a resting area (Zzz) goes 4 times faster.
    #        Default: 1 (bubble every 8 hrs)
    #
    #    Drop(Color):
    #        These values will be multiplied by the drop percentages of the items for creatures
    #        to determine which items to drop. All default to 1.
    #        To allow you better control of drops, separate multipliers have been created for items 
    #        of each quality group. 
    #
    #    DropMoney:
    #        This value will be multiplied by any gold looted and pickpocketed
    #
    #    Save:
    #        Value in milliseconds (ms) that will be between player autosaves.
    #        Default: 300000 (5 minutes)
    # 
    #    SkillChance:
    #        The chance that you have to level up a skill in melee or a profession is multiplied
    #        by this value.
    #        Default: 1
    #
    #    SkillRate:
    #        The amount of "levels" your skill goes up each time you gain a level is multiplied
    #        by this value.
    #
    #    ArenaMultiplier
    #         Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Rates Health="1"
           Power1="1"
           Power2="1"
           Power3="1"
           QuestReputation="1"
           KillReputation="1"
           Honor="1"
           PvPTimer="300000"
           ArenaQueueDiff="150"
           Compression="1"
           XP="55"    [This is the XP Rate] This is MY Configs and i recommend you will use this !]]] This is for Funservers ;) But u can edit as your choice.
           QuestXP="100"
           RestXP="60"
           ExploreXP="1"
           DropGrey="1"
           DropWhite="1"
           DropGreen="1"
           DropBlue="15"
           DropPurple="15"
           DropOrange="10"
           DropArtifact="5"
           DropMoney="50"
           Save="300000"
           SkillChance="1"
           SkillRate="1"
           ArenaMultiplier2x="1"
           ArenaMultiplier3x="1"
           ArenaMultiplier5x="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    #   This should be set to 'gm_sync_channel' for the My_Master addon to work.
    #   Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GMClient GmClientChannel = "gm_sync_channel">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain & Collision Settings
    #
    #   Set the path to the map_xx.bin files and whether unloading should be enabled
    #   for the main world maps here. Unloading the main world maps when they go idle
    #   can save a great amount of memory if the cells aren't being activated/idled
    #   often. Instance/Non-main maps will not be unloaded ever.
    #
    #   Default:
    #      MapPath = "maps"
    #      vMapPath = "vmaps"
    #      UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Terrain MapPath = "maps"
             vMapPath = "vmaps"
             UnloadMaps = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    # 
    #    Cheaters:
    #        This directive sets up the cheater logging file, if turned on any
    #        cheat / packet exploit / speedhack attempts will be logged here.
    #
    #    GMCommands:
    #        These two directives set up the GM command logging fie. If turned on,
    #        most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Log Cheaters="0" GMCommands="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    #    These directives control the limits and behaviour of the ingame mail system.
    #    All options must have Mail prefixed before them.
    #   
    #    ReloadDelay                 
    #        Controls the delay at which the database is "refreshed". Use it if you're
    #        inserting mail from an external source, such as a web-based interface.
    #        0 turns it off.
    #        Default: 0
    #
    #    DisablePostageCostsForGM 
    #        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    #        Default: 1
    #
    #    DisablePostageCosts
    #        Disables postage costs for all players.
    #        Default: 0
    #
    #    DisablePostageDelayItems
    #        Disables the one hour wait time when sending mail with items attached.
    #        Default: 1
    #
    #    DisableMessageExpiry
    #        Turns off the 30 day / 3 day after read message expiry time. 
    #        WARNING: A mailbox still cannot show more than 50 items at once
    #        (stupid limitation in client).
    #        Default: 0
    #
    #    EnableInterfactionMail
    #        Removes the faction limitation for sending mail messages. Applies to all players.
    #        Default: 1
    #
    #    EnableInterfactionMailForGM 
    #        Removes the faction limitation for sending mail messages, but only applies
    #        to GM's. EnableInterfactionMail overrides this.
    #        Default: 1
    #   
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Mail ReloadDelay="0"
          DisablePostageCostsForGM="1"
          DisablePostageCosts="0"
          DisablePostageDelayItems="1"
          DisableMessageExpiry="0"
          EnableInterfactionMail="1"
          EnableInterfactionMailForGM="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    #        These directives set up the status dumper plugin. Filename is an
    #        absolute or relative path to the server binary. Interval is the
    #        time that the stats will be dumped to xml.
    #        Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <StatDumper FileName = "stats.xml" Interval = "120000">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    #    Preloading
    #        This directive controls whether the entire world will be spawned at server
    #        startup or on demand. It is advised to leave it disabled unless you are a
    #        developer doing testing.
    #        Default: off
    #
    #    Background Loot Loading
    #        This directive controls whether loot will be loaded progressively during
    #        startup or in the background in a seperate thread. Turning it on will
    #        result in much faster startup times.
    #        Default: on
    #
    #    Multithreaded Startup
    #        This controls whether the server will spawn multiple worker threads to
    #        use for loading the database and starting the server. Turning it on
    #        increases the speed at which it starts up for each additional cpu in your
    #        computer.
    #        Default: on
    #
    #    Additional Table Binding
    #        You can load static item/creature/etc data into the server using this directive.
    #        This way throughout database updates your custom data can be preserved.
    #        Format: "sourcetable destination table,sourcetable destinationtable"
    #        Example: "myitems items,mynpcs creature_names"
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Startup Preloading = "0"
             BackgroundLootLoading = "1"
             EnableMultithreadedLoading = "1"
             LoadAdditionalTables="">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    #    Lines
    #        This is the number of "messages" or lines that it will allow before stopping messages from
    #        being sent. This counter is reset every "Seconds" seconds.
    #        Default: 0 (disabled)
    #
    #    Seconds
    #        This is the number of seconds inbetween the Line counter being reset.
    #        Default: 0 (disabled)
    #
    #    SendMessage
    #        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    #        message will be sent upon flood triggering.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    #    DisablePings   
    #        This directive controls whether pings will be sent to the logonserver to check
    #        if the connection is still "alive". Expect problems if it is disabled.
    #        Default: 0
    #
    #    RemotePassword
    #        This directive controls the password used to authenticate with the logonserver.
    #        It must be the same between the two configs. If it is not, your server will
    #        not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer DisablePings = "0"
                 RemotePassword = "Tsoforever2">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    #    Teleport   
    #        This directive controls anti-teleport hack checks will be enabled or not.
    #        Default: 1
    #
    #    Speed
    #        This directive controls anti-speed hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    SpeedThreshold
    #        This directive controls the threshold at which the speedhack detection will trip.
    #        It's (characters' move time of distance - real move time of distance)
    #        Default: -600.0
    #
    #    FallDamage
    #        This directive controls anti-fall damage hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    Flying
    #        This directive controls whether flight hacks will be performed on players or not.
    #        Default: 1
    #
    #    FlightThreshold
    #	   This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    #	   Default: 10
    #
    #    DisableOnGM
    #        This directive controls hack checks will be disabled for GM's or not.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AntiHack Teleport="1"
              Speed="1"
              FallDamage="1"
              Flight="1"
    	  FlightThreshold="10" 
              DisableOnGM="1">            [This is perfect Configured ! You can use cheats but not the players ! See ! DisableOnGM="1">  1 = ON ! 0= OFF
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    #    These are the periods that the server will wait before doing periodic duties. At the moment only
    #    arena point calculation and honor point calculation are used here.
    #
    #    Default:
    #         Arena: weekly
    #         Honor: daily
    #             (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Periods HonorUpdate="daily"
             ArenaUpdate="weekly"
             DailyUpdate="daily">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    #    These directives control some of the aspects in the channel system.
    #
    #    BannedChannels
    #         If you would like to ban users from creating or joining a channel specify them here in a ';'
    #         seperated list.
    #         Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Channels BannedChannels="">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    #    These directives control some of the aspects in the voice chat system.
    #
    #    Enabled
    #         If you want to enable the voice chat system, this must be set to 1.
    #         Default: "0"
    #
    #    ServerIP
    #         This is the IP of the voice chat server.
    #         Default: "127.0.0.1"
    #
    #    ServerPort
    #         This is the TCP port of the voice chat server.
    #         Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <VoiceChat Enabled="0"
               ServerIP="127.0.0.1"
               ServerPort="3727">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Remote Console Setup
    #
    #    These directives control the remote administration console.
    #
    #    Enabled
    #         If you want to enable the remote administration console, set this.
    #         Default: 0
    #
    #    Host
    #         This is the interface the RA server listens on.
    #         Default: "0.0.0.0"
    #
    #    Port
    #         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    #         Default: 8092
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <RemoteConsole Enabled="0"
                   Host="0.0.0.0"
                   Port="8092">
          
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Scripting Engine Setup
    #
    #    ArcEmu can support multiple script backends via the means of loading .dll files for them.
    #    This section in the config can enable/disable those backends.
    #
    #    LUA
    #         If you would like to enable the LUA scripting backend, enable this.
    #         Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <ScriptBackends LUA="1"
                    AS="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Movement Setup
    #
    #    NOTE: For any of these directives to function, movement compression has to be compiled into
    #          the server.
    #
    #    FlushInterval
    #        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    #        If you have a high threshold, keeping this at 1-2 seconds will work better.
    #        Default: 1000 (one second)
    #
    #    CompressionRate
    #        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    #        Range: 1-9 (or 0 is disable)
    #        Default: 1
    #
    #    CompressionThreshold
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. It is advised to keep it at least 30 units. This value is used for players.
    #        Default: 30.0
    #
    #    CompressionThresholdCreatures
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. This value is used for creatures, so it can be a lot lower.
    #        Default: 10.0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Movement FlushInterval="1000"
              CompressRate="1"
              CompressThreshold="30.0"
              CompressThresholdCreatures="10.0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    #    LocaleBindings
    #        This is a list of locale names and the other locale you want to associate with them.
    #        For example, to make the European client always use the french language, "enGB=frFR"
    #
    #        Must be terminated by a space.
    #
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Localization LocaleBindings="">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Dungeon / Instance Setup
    #
    #    TakeGroupLeaderID
    #        If a player doesn't have an instance id, the group isn't already assigned
    #        to an instance and the group or raid leader already have one, the player will
    #        be bound to the instance id of the group/raid leader.
    #        Default: 1 (enabled)
    #
    #    SlidingExpiration
    #        If enabled, persistent instances will expire relative to the creation time.
    #        Otherwise persistent instances will expire at fixed points of time. (blizz like)
    #        Default: 0 (disabled)
    #
    #    DailyHeroicInstanceResetHour
    #        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
    #        Default: 5
    #
    #    CheckTriggerPrerequsites
    #        Entering & checks
    #        Default: 1
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <InstanceHandling TakeGroupLeaderID="1" 
                      SlidingExpiration="0" 
                      DailyHeroicInstanceResetHour="5" 
                      CheckTriggerPrerequsites="1" >
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # BattleGround settings
    # Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
    #
    #    AlteracValley
    #    AV_MIN
    #    AV_MAX
    #
    #    ArathiBasin
    #    AB_MIN
    #    AB_MAX
    #
    #    WarSong
    #    WS_MIN
    #    WS_MAX
    #
    #    Eyes Of The Storm.
    #    EOS_MIN
    #    EOS_MAX
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Battleground AV_MIN="0" 
    							AV_MAX="40" 
    							AB_MIN="0" 
    							AB_MAX="15" 
    							EOS_MIN="0" 
    							EOS_MAX="15" 
    							WS_MIN="0" 
    							WS_MAX="10" >
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    #    StartOnGMIsland
    #
    #     Makes GM Characters start on GM Island
    #
    #     Also sets their bind location to GM Island
    #     Default:1 (Yes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <GameMaster StartOnGMIsland = "0">

    LOOK ! This Code Configs files is according MY server, and its very populair. So theese options in my Conf files is very good, and i recommend you use it !. But you dont have to

    Now open arcemu-optional.conf with Notepad. This is optional too but if you want to change anything

    Remember ! The number 1 = On ! and 0 = OFF !!!

    Code:
    ###########################################################################
    # ArcEmu Optional Configuration File
    # Last Update: $Id: arcemu-optional.conf rev.1875
    #
    # This configuration file contains all non-blizzlike values.
    ###########################################################################
    
    #/********************************************************************************
    # * How to use this config file:                                                 *
    # * Config files are in a block->variable->setting format.                       *
    # * A < signifies the opening of a block, the block name is expected after that. * 
    # * After the block name, a space and then the settings sperated by = / ' '.     *
    # *                                                                              *
    # * e.g.                                                                         *
    # * <block setting="0" someval = "1">                                            *
    # *                                                                              *
    # * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
    # * of the line, or in shell format (#).                                         *
    # ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Optional Settings
    #
    #    Starting Level
    #      This controls at which level characters are created. Range is from 1-80.
    #      Default: 1
    #
    #    Level Cap
    #      This variable controls the level that stats will be generated up to internally.
    #      Beyond this level players can still see a higher level visually but their stats won't
    #      increase beyond this point.
    #      Default: 80
    #
    #    Generated Level Level Cap
    #      This variable controls the level at which stats will generate up to. Generally the formulas go
    #      crazy after level 80 so this way you can keep the high visual but stats at a reasonable value.
    #      Default: 80
    #
    #    Allow The Burning Crusade characters
    #      This will override account settings, so you can disable TBC from your server without having to mess with accounts.
    #      Default: 1 
    #
    #    CustomCharterGiver(EntryID)
    #      For registeration of custom script.
    #
    #    AdditionalFun
    #      it's verbose.
    #      Default: 0 (disabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Optional StartingLevel="80"
    	LevelCap="355"
    	GenLevelCap="355"
    	AllowTBC="1"
     	AntiMasterLootNinja="0" 
    	CustomCharterGiver="0" 
      AdditionalFun="0" >
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Interfaction Options
    #
    #    InterfactionChat
    #      This directive controls whether horde and alliance players can talk to each other.
    #      Default: 0 (disabled)
    #
    #    InterfactionGroup
    #      This directive controls whether horde and alliance players are able to build a group together.
    #      Default: 0 (disabled)
    #
    #    InterfactionGuild
    #      This directive controls whether horde and alliance players are able to build crossfaction guilds
    #      Default: 0 (disabled)
    #
    #    InterfactionTrade
    #      This directive controls whether horde and alliance players can trade with each other.
    #      Default: 0 (disabled)
    #
    #    InterfactionFriends
    #      If this is enabled players can add other players from the opposite faction to their friends list
    #      Default: 0 (disabled)
    #
    #    InterfactionMisc
    #      This directive controls whether horde and alliance players are able to use different functions
    #      on players of the opposite faction. This includes e.g. using the /who command.
    #      Default: 0 (disabled)
    #
    #    CrossOverCharacters
    #      If this is enabled players are able to create both, horde and alliance characters on a PVP realm.
    #      Default: 0 (disabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Interfaction InterfactionChat="1" 	
    	InterfactionGroup="1"
    	InterfactionGuild="1"
    	InterfactionTrade="1"
    	InterfactionFriends="1"
    	InterfactionMisc="0"
    	CrossOverCharacters="0">
    
    (READ) This means that you can talk to horde if your alliance and that. You can trade and that.. Remember 1 = ON ! 0 = OFF !!
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Color Configuration
    #
    #    AnnTagColor
    #      This controls which color the [] tag in front of announces has.
    #      Default: 2 (Light Blue)
    #
    #    AnnGMTagColor
    #      This controls the color of the GM/Admin tag in announces. Only enabled if GMAdminTag is set to 1.
    #      Default: 1 (Light red)
    #
    #    AnnNameColor
    #      This controls the color of the gamemaster's name in announces.
    #      Default: 4 (Green)
    #
    #    AnnMsgColor
    #      This controls the color of message in announces.
    #      Default: 6 (Gold)
    #
    #
    #   You can choose one of the colors below.
    #     LightRed	= 1
    #     LightBlue = 2
    #     Blue	= 3
    #     Green	= 4
    #     Red	= 5
    #     Gold 	= 6
    #     Grey	= 7
    #     White	= 8
    #     Magenta 	= 9
    #     Yellow 	= 10
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Color AnnTagColor = "2"
    	AnnGMTagColor = "1"
    	AnnNameColor = "4"
    	AnnMsgColor = "6">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Extra Scripts Configuration
    #
    #    Instant80
    #      Enables Instant80 mode.
    #
    #    PvPToken
    #      This directive enables  item rewards when there is a PvP Kill and players are level 70
    #
    #    PvPTokenID
    #      If PvPToken is enabled, specify the item ID of your custom Token ID, or any other item
    #
    #    L70etc
    #      Enables L70etc Band Gossip script.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Extra Instant80="0" 
    	PvPToken="0" 
    	PvPTokenID="13905" 
    	PvPKillAnnounce="0" 
    	Portals="0" 
    	L70etc="0" 
    	WeddingNPC="0">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GameMaster Configuration
    #
    #    ListOnlyActiveGMs
    #      List only gamemasters with enabled GMFlag to players without any permissions.
    #      Default: 0
    #
    #    HidePermissions
    #      Hides permission flags from players without any permissions.
    #      Default:0
    #
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GameMaster ListOnlyActiveGMs = "0"
    	HidePermissions = "0">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Common Schedule Configuration (func from commonschedulethread.cpp p2wow's core)
    #
    #    AutoBroadCast (MultiLanguages supported)
    #      Enable/Disable new broadcast system.(cebernic: blizzlike )
    #      Default: 0(Disable) 1(Enable)
    #
    #    BroadCastInterval
    #      Contents sending on interval by second
    #      Default:(Min:10 Max:1440)
    #
    #    BroadCastTriggerPercentCap
    #      Setup the cap of chance in condition with contents sending in each BroadCastInterval's value
    #      Notice: OP can setup any of message's priority, this could be adjustment in field `percent` of table `worldbroadcast`
    #      Default:99 (min:1 max:99, 99 only displaying message on priority 100 set.)
    #      i.e : If set 50 ,it means all of messages 100% selected(but may not displayed) by higher than '50' priority with each broadcastinterval.
    #      The total selected messages(>51 priority) chosen at random with send to all players.
    #
    #    BroadCastOrderMode [0-1]
    #      0:RandomMode - By Triggering & Conditions 
    #      1:SerialMode - [ignored both ->field `percent` from table `worldbroadcast` & TriggerPercentCap parameters.]
    #      Default:0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <CommonSchedule AutoBroadCast = "1"
    	BroadCastInterval = "10"
    	BroadCastTriggerPercentCap = "2"
    	BroadCastOrderMode = "0">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    #Extra Class Configurations
    #	DeathKnightPreReq
    #		Enable/Disable requirement to have a level 55 character on your account before allowing creation
    #		Of a Death Knight hero class.
    #		1 = level 55
    #		0 = Any level
    #
    #	DeathKnightLimit
    #		Enable/Disable limit to have a more than one Death Knight Hero Class per realm.
    #		1 = Enabled (Only one Death Knight per realm)
    #		0 = Disabled (You can create a 10 DK per realm)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <ClassOptions DeathKnightPreReq = "1"
    	    DeathKnightLimit = "1" >
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GoldSettings Configuration
    #
    #    EnableGoldCap
    #      Enable/Disable Maximum Gold.
    #      Default: 0(Disable) 1(Enable)
    #
    #    StartingGold
    #      On Creating a character they will start with this amount in Gold
    #      Default: 0
    #
    #    MaximumGold
    #        Maximum amount of Gold a character can hold
    #      Default: 214748 (214k gold)
    #        Note: Client Max is 214748 Gold (2^31, signed int32)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GoldSettings EnableGoldCap = "0"
    	      StartingGold = "100"
    	      MaximumGold = "214748">
    Now your Server is done ! NOTICE NOTICE NOTICE ! XD If you want to set a website. [INCLUDES THE REPACK] Watch this Video on google !

    VIDEO !!!! (RECOMMEND THAT YOU WATCH IT IN HD !! HIGH QUALITY)
    [ame="http://www.youtube.com/watch?v=abPdPWWg0Xg"]http://www.youtube.com/watch?v=abPdPWWg0Xg[/ame]

    CREDITS !!!!!
    Tsforever2 For the Amazing Repack !!!! :wave:
    EasyWoWTutorials For the Amazing Tutorial on Youtube !!!! :wave:
    Lillfjanten For this Amazing Guide !!!! :wave:



    This Repack Features

    Old Ironforge Is New Gm Island *.recall port GmIsland Updated*
    Dalaran Is 99.8% Complete
    Zepplins and Boats Work! *Not Northrend Ones - Waiting for Nc-Db*
    Music Npc, Teleporter, Working Portals, Over 90 Venders *Credits To Owners*
    PvP Fully Working
    Working Deathknights
    Working Mounts
    Working Achievements
    Working Glyphs
    Most Of Northrend Spawned!
    Easy to Use Installer!
    Website Coming Soon! *Working On Website!*
    ArcEmu Rev 1908 *Thanks to Faddix + Me *
    And So Much More!
    Last edited by lillfjanten; 12-20-2008 at 05:34 PM.

    These ads disappear when you log in.

  2. #2
    cornboi's Avatar Sergeant
    Reputation
    1
    Join Date
    Dec 2007
    Posts
    47
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    DK included?

  3. #3
    whipfron's Avatar Private
    Reputation
    1
    Join Date
    Dec 2008
    Posts
    5
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    ey, how do i get it up and running? :P

  4. #4
    lillfjanten's Avatar Corporal
    Reputation
    8
    Join Date
    Nov 2008
    Posts
    17
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Yes, Dk is working. How you get it up running xD ? Just start Arcemu-logonserver and Arcemu-world...

  5. #5
    Zimzago's Avatar Member
    Reputation
    1
    Join Date
    Oct 2007
    Posts
    5
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    How do you add accounts etc.?

  6. #6
    lillfjanten's Avatar Corporal
    Reputation
    8
    Join Date
    Nov 2008
    Posts
    17
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Hmm... Yea. I add it tomorrow because im very busy right now.
    But u do that on ur site or in ur database xD..

  7. #7
    whipfron's Avatar Private
    Reputation
    1
    Join Date
    Dec 2008
    Posts
    5
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    ye, i tryed. but when i pressed, it popped up a warning that says thats the configuration is wrong.. :s

  8. #8
    ranso's Avatar Master Sergeant CoreCoins User
    Reputation
    29
    Join Date
    Jan 2008
    Posts
    131
    Thanks G/R
    2/0
    Trade Feedback
    0 (0%)
    This works really well. Haven't tried the site yet but the DB and sever work great. nice guide. +rep

  9. #9
    Kroko's Avatar Private
    Reputation
    13
    Join Date
    Jan 2007
    Posts
    14
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    good guide working well for me

  10. #10
    Kroko's Avatar Private
    Reputation
    13
    Join Date
    Jan 2007
    Posts
    14
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    sorry for double post but when i make a char i get an error 132 S:

  11. #11
    ranso's Avatar Master Sergeant CoreCoins User
    Reputation
    29
    Join Date
    Jan 2008
    Posts
    131
    Thanks G/R
    2/0
    Trade Feedback
    0 (0%)
    Ok i can't seem to get the server private. The public part of the guide is more setting up a site.....

  12. #12
    C0LDR4G3's Avatar Corporal
    Reputation
    1
    Join Date
    Feb 2007
    Posts
    17
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    I have the problem that all the trainers don't have the option of learning spells from them. They either talk to me as if I'm not of the same class as the one whom they teach spells or they recognize me as one of them but don't have the teach-me-stuff or talent-point-reset dialogue option. Please help me. =(

  13. #13
    whipfron's Avatar Private
    Reputation
    1
    Join Date
    Dec 2008
    Posts
    5
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    i can start world and logonserver now, but its still an error..

    connection failed due to: "Unknown database "characters" its the error on logonserver

    and

    connection failed due to: "acces denied for user "root" @ "localhost" <using password: YES>

    whats wrong? ;s

  14. #14
    lillfjanten's Avatar Corporal
    Reputation
    8
    Join Date
    Nov 2008
    Posts
    17
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Ey ! I will delete this, and make a new post with MUCH better repack ! Or i will Change this 1 !!

  15. #15
    Zimzago's Avatar Member
    Reputation
    1
    Join Date
    Oct 2007
    Posts
    5
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Got it all working now except I can't get to Northrend, and do all the WOTLK stuff..

Page 1 of 4 1234 LastLast

Similar Threads

  1. [Guide] How to make a 3.0.8 Wotlk private server With Extras!
    By Freakstorm in forum WoW EMU Guides & Tutorials
    Replies: 34
    Last Post: 04-05-2009, 03:29 PM
  2. Extremely detailed guide for a WOTLK Private Server v3.08
    By Invisible in forum WoW EMU Guides & Tutorials
    Replies: 30
    Last Post: 03-11-2009, 10:03 PM
  3. [How To] Make a Wotlk Private server][Easy Guide]
    By Bunster in forum WoW EMU Guides & Tutorials
    Replies: 13
    Last Post: 01-17-2009, 06:36 AM
  4. [Request]Nooby Guide On How To Make A Private Server Out Of Scratch
    By death1223 in forum World of Warcraft Emulator Servers
    Replies: 4
    Last Post: 12-17-2007, 11:41 AM
All times are GMT -5. The time now is 12:22 AM. Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved. Digital Point modules: Sphinx-based search