Necrobot Device ID

[BRNY]

Hey there.. seems like everyone with just half a brain and no access to google is asking the same question.

"HOW TO SET UP MY DEVICE ID, OR CAN I KEEP THE DEFAULT ONE?"

Yes, you can keep the default one, but than every1 has the same DeviceID and you will maybe get flagged for beeing dumb.

If you own an Android Phone or know some1 with an Android phone just install the following App:

https://play.google.com/store/apps/d...abs.deviceinfo

After that you can edit every Line in Necroconfig easily.

Or you use this, than your phone looks like a Samsung Galaxy S6.

"DeviceId": "572h3c7c87e2h76b", <- CHANGE THIS
"AndroidBoardName": "universal7420",
"AndroidBootloader": "G920FXXS3DPD2",
"DeviceBrand": "samsung",
"DeviceModel": "zeroflte",
"DeviceModelIdentifier": "SM-G920F",
"DeviceModelBoot": "qcom",
"HardwareManufacturer": "samsung",
"HardwareModel": "SM-G920F",
"FirmwareBrand": "zerofltexx",
"FirmwareTags": "release-keys",
"FirmwareType": "user",
"FirmwareFingerprint": "samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS3DPD2:user/release-keys",

At least its only neccessary to change DeviceID in config.json - Brand/Bootloader/Model is always the same for a specific device with same Software/Firmware installed

Greetings BRNY

[zarbol]

Hey there.. seems like everyone with just half a brain and no access to google is asking the same question.

"HOW TO SET UP MY DEVICE ID, OR CAN I KEEP THE DEFAULT ONE?"

Yes, you can keep the default one, but than every1 has the same DeviceID and you will maybe get flagged for beeing dumb.

If you own an Android Phone or know some1 with an Android phone just install the following App:

https://play.google.com/store/apps/d...abs.deviceinfo

After that you can edit every Line in Necroconfig easily.

Or you use this, than your phone looks like a Samsung Galaxy S6.

"DeviceId": "572h3c7c87e2h76b", <- CHANGE THIS
"AndroidBoardName": "universal7420",
"AndroidBootloader": "G920FXXS3DPD2",
"DeviceBrand": "samsung",
"DeviceModel": "zeroflte",
"DeviceModelIdentifier": "SM-G920F",
"DeviceModelBoot": "qcom",
"HardwareManufacturer": "samsung",
"HardwareModel": "samsungexynos7420",
"FirmwareBrand": "zerofltexx",
"FirmwareTags": "dev-keys",
"FirmwareType": "user",
"FirmwareFingerprint": "samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS3DPD2:user/release-keys",

At least its only neccessary to change DeviceID - Brand/Bootloader/Model is always the same for a specific device with same Software/Firmware installed

Greetings BRNY

Which file is that to change?

[Webbx89]

Thanks working great. To answer the above question you need to change the config.json file after you launch necrobot and enter your account details. then close out of the program and go to the folder it came in and go to config then config.json and ctrl+F and search for device and change the device id to yours. Whala it works like a charm.

[monnno420]

How do I find the "DeviceModelIdentifier" , "DeviceModelBoot" , "FirmwareTags" , "FirmwareType" "AndroidBootloader" ?

[Brick3]

People get flagged over their IP you imbecile.

[zarbol]

Ah perfect, thanks mate !

[Doja]

couldn't this device id be randomized on startup?

[Webbx89]

I dont care about the IP. I only use one account lol

[BRNY]

How do I find the "DeviceModelIdentifier" , "DeviceModelBoot" , "FirmwareTags" , "FirmwareType" "AndroidBootloader" ?

DeviceModellIdentifier -> Model (in the App)
DeviceModelBoot -> leave it "qcom" or use Hardware (in the App)
AndroidBootloader -> Bootloader

leave rest like it is

[nachswac]

Can't you just write anything you want?

[b0Ni07]

In your android phone, download AIDA64 from play store,

And using it fill in the info on you config

"DeviceId" : AIDA64 > Android > Android Id
"AndroidBoardName": AIDA64 > System > Board
"AndroidBootloader": AIDA64 > Android > Bootloader
"DeviceBrand": AIDA64 > System > Brand
"DeviceModel": AIDA64 > System > Device Model
"DeviceModelIdentifier": AIDA64 > Android > Build ID
"DeviceModelBoot": AIDA64 > System > Hardware
"HardwareManufacturer": AIDA64 > System > Manufacturer
"HardwareModel": AIDA64 > System > Model
"FirmwareBrand": AIDA64 > System > Device Model
"FirmwareTags": AIDA64 > Android > Tags
"FirmwareType": AIDA64 > Android > Type
"FirmwareFingerprint": AIDA64 > Android > Fingerprint

..............

[Drax27]

With the version 0.7.2 ( https://github.com/NECROBOTIO/NecroBot/releases), it says: "This release features automatic Device ID generation, if you leave the values static."
What does it mean with "static values"? I have to leave the same device id which is in the config file?

[BRNY]

With the version 0.7.2 ( https://github.com/NECROBOTIO/NecroBot/releases), it says: "This release features automatic Device ID generation, if you leave the values static."
What does it mean with "static values"? I have to leave the same device id which is in the config file?

this means the device-id is random but the rest is static. so you can use this or use your device information.

[blackstar34]

"DeviceId which one on my phone ??

Mean Imei ??

[Drax27]

this means the device-id is random but the rest is static. so you can use this or use your device information.

Ok, but do I change the device id in the auth file? Or I have to leave it?