Working CC Triggerbot - no HP - 1.12 bypass - 50%+ accuracy

[koolguy265]

got it to work, still think manual play is better tho lol

[C4rter10]

17 errors and 1 warning??? please fix

[CCaimbot]

Version 8 Release:

This should be better than version 7. It's more likely to hit inside target rather than outside. Still I can't figure out why it's firing outside the target. Doesn't make much sense. Mccree also works a lot better than widow for some reason. Best ran in 1080P.

Can anyone tinker with DistanceFromTargetBeforeFiringX and DistanceFromTargetBeforeFiringY and tell me what works best??

Imports System.Runtime.InteropServices


Public Class Form1
    'version 8
    'recommended to use with Mccree

    Private Declare Function GetTickCount Lib "kernel32" () As UInt32
    Public t As New Timer With {.Interval = 1}
    Public ScanRange As Long = 50

    Public Pixels(ScanRange * ScanRange + ScanRange) As Integer
    Public Pixels_Hue(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Brightness(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Saturation(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_R(ScanRange * ScanRange + ScanRange) As Single
    Public LastFireTick As UInteger

    Dim AmountOfPureWhiteFound As Long

    'edit values below to modify triggerbot
    'autofire delay - 510 for mccree - 1400 for widow 
    Public FireDelayRightMouseDown As UInteger = 1400 'autofire delay when right mouse is down
    Public FireDelayRightMouseUp As UInteger = 510 'autofire delay when right mouse is up
    Public ScanRangeRightMouseDown As Long = 50  'amount of pixels to scan for sniper - right click down
    Public ScanRangeRightMouseUp As Long = 25 'amount of pixels to scan for right click up
    Public AdjustDown As Integer = -1 'optional - move scanning up/down depending on where window is - negative values allowed
    Public AdjustRight As Integer = -1  'optional - move scanning left/right depending on where window is - negative values allowed
    Public RedOrangeRange As Single = 13 ' adjust down to decrease targeting orange
    Public RedVioletRange As Single = 345 ' adjust up to decrease targeting violet
    Public MinBrightness As Single = 0.35 'minimum brightness of pixel range (0-1.00)
    Public MaxBrightness As Single = 0.8 'maximum brightness of pixel range (0-1.00)
    Public MinSaturation As Single = 0.3 'minimum saturation of pixel range (0-1.00)
    Public MinRed As Single = 120 'minimum red value of pixel (0-255) - set lower for darker maps
    'x/y might be inverted
    Public DistanceFromTargetBeforeFiringX As Long = 12 ' maximum distance from target in x and y to fire
    Public DistanceFromTargetBeforeFiringY As Long = 5 ' maximum distance from target in x and y to fire

    Public NonWhiteCrosshair As Long = 1 ' change this to 1 to stop widow from auto firing while in zoom.  Detects pure white crosshair in zoom.


    <DllImport("user32.dll")>
    Shared Function GetAsyncKeyState(ByVal vKey As System.Windows.Forms.Keys) As Short
    End Function

    Private Const VK_RBUTTON = &H2
    Private Const VK_LBUTTON = &H1
    Private Const VK_Q = &H51

    <DllImport("user32.dll")>
    Private Shared Function ReleaseDC(ByVal hWnd As IntPtr, ByVal hDc As IntPtr) As IntPtr
    End Function
    <DllImport("user32.dll", SetLastError:=True)>
    Private Shared Function GetActiveWindow() As IntPtr
    End Function
    <DllImport("gdi32")>
    Public Shared Function BitBlt(ByVal hDestDC As IntPtr, ByVal X As Integer, ByVal Y As Integer, ByVal nWidth As Integer, ByVal nHeight As Integer, ByVal hSrcDC As IntPtr, ByVal SrcX As Integer, ByVal SrcY As Integer, ByVal Rop As Integer) As Boolean
    End Function
    Dim GCH As GCHandle = GCHandle.Alloc(Pixels, GCHandleType.Pinned)

    Dim Bmp As New Drawing.Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                  Imaging.PixelFormat.Format32bppArgb,
                                  GCH.AddrOfPinnedObject)

    <DllImport("user32.dll")>
    Private Shared Function GetWindowDC(ByVal hwnd As IntPtr) As IntPtr
    End Function

    Declare Function GetWindowRect Lib "user32.dll" (
ByVal hwnd As Int32,
ByRef lpRect As Rectangle) As Int32


    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
        If t.Enabled = 0 Then
            Button1.Text = "STOP"
            t.Enabled = 1
        Else
            Button1.Text = "START"
            t.Enabled = 0
        End If
    End Sub

    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
        AddHandler t.Tick, AddressOf Timer_tick
        If FireDelayRightMouseDown < 100 Then FireDelayRightMouseDown = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
        If FireDelayRightMouseUp < 100 Then FireDelayRightMouseUp = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
    End Sub
    Private Sub Timer_tick(sender As Object, e As EventArgs)
        RunAimbot()
    End Sub


    Public Sub RunAimbot()

        Dim Amountfound As Long
        Dim AmountfoundCC1 As Long
        Dim CCAmount(0 To 1000) As Long
        Dim I As Long

        Dim lowestX As Long
        Dim lowestY As Long
        Dim highestX As Long
        Dim highestY As Long

        Dim TargetX As Long
        Dim TargetY As Long
        Dim TargetAmountFound As Long

        lowestX = 900
        lowestY = 900

        Dim avgHUE As Single
        Dim avgBrightness As Single
        Dim avgsaturation As Single
        Dim AMountOfPixels As Single
        Dim FireTriggered As Single

        Dim YW As Single
        Dim X As Single
        Dim Y As Single

        Dim YW2 As Single
        Dim X2 As Single
        Dim Y2 As Single
        Dim YWY As Integer
        Dim YW2Y2 As Integer
        Dim CombinedLineFigure As Long

        Dim screenwidth = CInt(Screen.PrimaryScreen.Bounds.Width)
        Dim screenheight = CInt(Screen.PrimaryScreen.Bounds.Height)

        Dim g As Graphics
        Dim hdcDest As IntPtr = IntPtr.Zero
        Dim desktopHandleDC As IntPtr = IntPtr.Zero
        Dim desktopHandle As IntPtr

        'change scan size based on whether mouse in down or up

        SetScanRange()




        desktopHandle = GetActiveWindow()


        Dim R As Rectangle = New Rectangle(CInt((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2)) + AdjustRight, CInt((Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2)) + AdjustDown, ScanRange, ScanRange)


        Bmp = New Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                      Imaging.PixelFormat.Format32bppArgb,
                                      GCH.AddrOfPinnedObject)



        g = Graphics.FromImage(Bmp)
        desktopHandleDC = GetWindowDC(desktopHandle)
        hdcDest = g.GetHdc

        Dim gf As Integer
        Dim GH As Rectangle


        gf = GetWindowRect(desktopHandle, GH)



        Dim NewRectWidth As Integer
        Dim NewRectheight As Integer
        NewRectWidth = GH.Width - GH.Left
        NewRectheight = GH.Height - GH.Top


        BitBlt(hdcDest, 0, 0, ScanRange, ScanRange, desktopHandleDC, CInt((screenwidth / 2) - (ScanRange / 2) + AdjustRight), CInt((screenheight / 2) - (ScanRange / 2) + AdjustDown), CopyPixelOperation.SourceCopy)


        g.ReleaseHdc(hdcDest)
        ReleaseDC(desktopHandle, desktopHandleDC)
        Bmp.Dispose()
        g.Dispose() : g = Nothing



        Dim myColor As Color


        AMountOfPixels = ScanRange * ScanRange

        For X = 3 To ScanRange - 4
            YW = X * ScanRange
            For Y = 3 To ScanRange - 4
                YWY = YW + Y
                myColor = Color.FromArgb((Pixels(YWY)))

                Pixels_Hue(YWY) = myColor.GetHue
                Pixels_Brightness(YWY) = myColor.GetBrightness
                Pixels_Saturation(YWY) = myColor.GetSaturation
                Pixels_R(YWY) = myColor.R

                avgHUE = avgHUE + Pixels_Hue(YWY)
                avgBrightness = avgBrightness + Pixels_Brightness(YWY)
                avgsaturation = avgsaturation + Pixels_Saturation(YWY)

                If NonWhiteCrosshair = 1 Then
                    'sniper zoom fix
                    If Pixels_Hue(YWY) = 0 And Pixels_Saturation(YWY) = 0 And Pixels_Brightness(YWY) = 1 And CheckRightMouse() = 1 And (LastFireTick + FireDelayRightMouseDown) <= GetTickCount Then
                        AmountOfPureWhiteFound = AmountOfPureWhiteFound + 1
                        If AmountOfPureWhiteFound > 20 Then
                            'fix for sniper red in zoom with large scan range =/

                            LastFireTick = LastFireTick + 150
                        End If
                    End If
                End If

                If Pixels_Hue(YWY) < RedOrangeRange Or Pixels_Hue(YWY) > RedVioletRange Then
                    If Pixels_Brightness(YWY) > MinBrightness And Pixels_Brightness(YWY) < MaxBrightness And Pixels_Saturation(YWY) > MinSaturation And Pixels_R(YWY) > MinRed Then ' Target by hue to bypass 1.12

                        Amountfound = Amountfound + 1

                        'DEBUG
                        'RichTextBox1.AppendText("HUE=" & (myColor.GetHue()).ToString & vbTab & "SAT=" & myColor.GetSaturation().ToString & vbTab & "BGT=" & (myColor.GetBrightness()).ToString & vbTab & myColor.R & vbNewLine)

                        If lowestX > X Then
                            lowestX = X
                        End If
                        If lowestY > Y Then
                            lowestY = Y
                        End If
                        If highestY < Y Then
                            highestY = Y
                        End If
                        If highestX < X Then
                            highestX = X
                        End If

                        'advanced comparison

                        For X2 = (X - 3) To (X + 3)
                            YW2 = X2 * ScanRange
                            For Y2 = (Y - 3) To (Y + 3)
                                YW2Y2 = YW2 + Y2
                                'x2=0 and y2=0 produces additional triggered pixel

                                If Pixels_Hue(YW2Y2) < RedOrangeRange Or Pixels_Hue(YW2Y2) > RedVioletRange Then
                                    If Pixels_Brightness(YW2Y2) > MinBrightness And Pixels_Brightness(YW2Y2) < MaxBrightness And Pixels_Saturation(YW2Y2) > MinSaturation And Pixels_R(YW2Y2) > MinRed Then ' Target by hue to bypass 1.12
                                        AmountfoundCC1 = AmountfoundCC1 + 1
                                    End If
                                End If

                            Next Y2
                        Next X2


                        CCAmount(AmountfoundCC1) = CCAmount(AmountfoundCC1) + 1
                        AmountfoundCC1 = 0

                        'target x/y
                        If CheckRightMouse() = 0 Then
                            For I = 1 To 13
                                TargetY = TargetY + Y  'settings for right mouse up
                                TargetX = TargetX + X
                                TargetAmountFound = TargetAmountFound + 1
                            Next I
                        Else
                            For I = 2 To 19
                                TargetY = TargetY + Y  'settings for right mouse down
                                TargetX = TargetX + X
                                TargetAmountFound = TargetAmountFound + 1
                            Next I
                        End If






                    End If
                End If
NExtY:
            Next Y
        Next X
        'combine line figures together
        If CheckRightMouse() = 0 Then
            For I = 1 To 13
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse up
            Next I
        Else
            For I = 2 To 19
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse down
            Next I
        End If


        '   CombinedLineFigure = CombinedLineFigure * 10
        ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)


        If CombinedLineFigure >= (ScanRange * 0.15) And (CombinedLineFigure * 1.33) >= Amountfound Then



            If (lowestX + (ScanRange * 0.15)) <= highestX And (lowestY + (ScanRange * 0.15)) <= highestY Then

                FireTriggered = 1
                '  RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
                ' RichTextBox1.AppendText("Fire" & vbNewLine)

            End If

        End If


        avgHUE = avgHUE / AMountOfPixels
        avgBrightness = avgBrightness / AMountOfPixels
        avgsaturation = avgsaturation / AMountOfPixels

        If avgHUE > 2 And avgHUE < 14 And avgBrightness < 0.45 And avgsaturation < 0.45 Then
            FireTriggered = 0 ' don't fire 
        End If

        If CheckRightMouse() = 0 Then 'adjust for zoom

            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringX Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringY Then
                FireTriggered = 0 ' don't fire
            End If
        Else 'while zoomed / hold down right click
            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringX * 2) Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringY * 2) Then
                FireTriggered = 0 ' don't fire
            End If


        End If

        If CheckKeyQ() = 1 And CheckRightMouse() = 0 Then
            LastFireTick = GetTickCount + 5000 'pressing Q for ultimate delays firing by 5 secs when mouse is up.  With widow use ultimate while zoomed to avoid delay.
        End If

        If FireTriggered = 1 Then
            Fire()
        End If




        'debug and testing
        If LastFireTick = GetTickCount Then
            ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
            ' RichTextBox1.Text = ("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness)
            'RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbNewLine)
            'RichTextBox1.AppendText("low_x= " & lowestX & "high_x= " & highestX & "low_y= " & lowestY & "high_y= " & highestY)

            '   Dim i2 As Long
            '  For i2 = 0 To 30
            '  RichTextBox1.AppendText(CCAmount(i2) & vbTab)
            '  Next
            'RichTextBox1.AppendText(vbNewLine)
            '   RichTextBox1.AppendText(Math.Round((TargetX / TargetAmountFound) - ScanRange / 2) & " " & (Math.Round((TargetY / TargetAmountFound)) - ScanRange / 2) & vbNewLine)

            'moving mouse settings
            'aimbot target X = Math.Round((screenwidth / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight - not tested
            'aimbot target Y = Math.Round((screenheight / 2) + (TargetY / TargetAmountFound) - ScanRange / 2) + AdjustDown- not tested
            'Y axis might be reversed - (Y * -1) to fix


            '  RichTextBox1.AppendText(Math.Round((screenheight / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight & vbNewLine)


        End If

    End Sub
    Public Sub Fire()
        If (LastFireTick + FireDelayRightMouseDown) <= GetTickCount And CheckRightMouse() = 1 Then GoTo Fire
        If (LastFireTick + FireDelayRightMouseUp) <= GetTickCount And CheckRightMouse() = 0 Then
Fire:
            If CheckLeftMouse() = 0 Then 'don't fire when mouse is being manually clicked
                SendKeys.Send("k")
                '  RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbNewLine)
            End If
            LastFireTick = GetTickCount
        End If
    End Sub
    Public Function CheckRightMouse() As Long
        If GetAsyncKeyState(VK_RBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckLeftMouse() As Long
        If GetAsyncKeyState(VK_LBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckKeyQ() As Long
        If GetAsyncKeyState(VK_Q) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Sub SetScanRange()
        If CheckRightMouse() = 0 Then
            ScanRange = ScanRangeRightMouseUp 'settings for right mouse up
        Else
            ScanRange = ScanRangeRightMouseDown 'settings for right mouse down
        End If

    End Sub


    Private Sub CheckBox1_CheckedChanged(sender As Object, e As EventArgs) Handles CheckBox1.CheckedChanged
        Dim i As Long

        Application.DoEvents()
        Using g As Graphics = Graphics.FromHwnd(IntPtr.Zero)
            For i = 0 To 999
                SetScanRange()
                Dim rect As Rectangle = New Rectangle((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2) + AdjustRight, (Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2) + AdjustDown, ScanRange, ScanRange)
                Using lgb As New Drawing2D.LinearGradientBrush(rect, Color.Blue, Color.Blue, 90, True)

                    g.FillRectangle(lgb, rect)
                    Application.DoEvents()
                    If Not CheckBox1.CheckState = CheckState.Checked Then Exit Sub
                End Using
            Next i
        End Using

        CheckBox1.CheckState = CheckState.Unchecked
    End Sub


End Class

EDIT: Just an update.

It seems that the red pixels surrounding the enemy is changed by the pixels behind it. Essentially what they did was change the background from opaque (can't see through) to partially transparent. So if the background is orange then the red outline will turn more orange. If the background is blue then the outline will turn more blueish. This explains why it has trouble aiming in Temple of Anubis for example where a lot of the background is orange. The red outline also turns orange as well. The background sometimes is very close to the outline or even matches exactly in hue. Orange hue of outline can go up to 23. So for now try to avoid aiming at places where the aimbot will screw up such as the ground in junkertown or some Temple of Anubis walls.

Also just found a glitch in version 8 that makes it more inaccurate. Version 9 is going to be released soon.

Version 9:

Imports System.Runtime.InteropServices


Public Class Form1
    'version 9
    'recommended to use with Mccree

    Private Declare Function GetTickCount Lib "kernel32" () As UInt32
    Public t As New Timer With {.Interval = 1}
    Public ScanRange As Long = 50

    Public Pixels(ScanRange * ScanRange + ScanRange) As Integer
    Public Pixels_Hue(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Brightness(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Saturation(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_R(ScanRange * ScanRange + ScanRange) As Single
    Public LastFireTick As UInteger

    Dim AmountOfPureWhiteFound As Long

    'edit values below to modify triggerbot
    'autofire delay - 510 for mccree - 1400 for widow 
    Public FireDelayRightMouseDown As UInteger = 1400 'autofire delay when right mouse is down
    Public FireDelayRightMouseUp As UInteger = 510 'autofire delay when right mouse is up
    Public ScanRangeRightMouseDown As Long = 50  'amount of pixels to scan for sniper - right click down
    Public ScanRangeRightMouseUp As Long = 25 'amount of pixels to scan for right click up
    Public AdjustDown As Integer = -1 'optional - move scanning up/down depending on where window is - negative values allowed
    Public AdjustRight As Integer = -1  'optional - move scanning left/right depending on where window is - negative values allowed
    Public RedOrangeRange As Single = 13 ' adjust down to decrease targeting orange
    Public RedVioletRange As Single = 345 ' adjust up to decrease targeting violet
    Public MinBrightness As Single = 0.35 'minimum brightness of pixel range (0-1.00)
    Public MaxBrightness As Single = 0.8 'maximum brightness of pixel range (0-1.00)
    Public MinSaturation As Single = 0.3 'minimum saturation of pixel range (0-1.00)
    Public MinRed As Single = 120 'minimum red value of pixel (0-255) - set lower for darker maps
    'x/y might be inverted
    Public DistanceFromTargetBeforeFiringX As Long = 5 ' maximum distance from target in x to fire
    Public DistanceFromTargetBeforeFiringY As Long = 2 ' maximum distance from target in y to fire

    Public NonWhiteCrosshair As Long = 1 ' change this to 1 to stop widow from auto firing while in zoom.  Crosshair cannot be a pure white for it to work if unzoomed.


    <DllImport("user32.dll")>
    Shared Function GetAsyncKeyState(ByVal vKey As System.Windows.Forms.Keys) As Short
    End Function

    Private Const VK_RBUTTON = &H2
    Private Const VK_LBUTTON = &H1
    Private Const VK_Q = &H51

    <DllImport("user32.dll")>
    Private Shared Function ReleaseDC(ByVal hWnd As IntPtr, ByVal hDc As IntPtr) As IntPtr
    End Function
    <DllImport("user32.dll", SetLastError:=True)>
    Private Shared Function GetActiveWindow() As IntPtr
    End Function
    <DllImport("gdi32")>
    Public Shared Function BitBlt(ByVal hDestDC As IntPtr, ByVal X As Integer, ByVal Y As Integer, ByVal nWidth As Integer, ByVal nHeight As Integer, ByVal hSrcDC As IntPtr, ByVal SrcX As Integer, ByVal SrcY As Integer, ByVal Rop As Integer) As Boolean
    End Function
    Dim GCH As GCHandle = GCHandle.Alloc(Pixels, GCHandleType.Pinned)

    Dim Bmp As New Drawing.Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                  Imaging.PixelFormat.Format32bppArgb,
                                  GCH.AddrOfPinnedObject)

    <DllImport("user32.dll")>
    Private Shared Function GetWindowDC(ByVal hwnd As IntPtr) As IntPtr
    End Function

    Declare Function GetWindowRect Lib "user32.dll" (
ByVal hwnd As Int32,
ByRef lpRect As Rectangle) As Int32


    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
        If t.Enabled = 0 Then
            Button1.Text = "STOP"
            t.Enabled = 1
        Else
            Button1.Text = "START"
            t.Enabled = 0
        End If
    End Sub

    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
        AddHandler t.Tick, AddressOf Timer_tick
        If FireDelayRightMouseDown < 100 Then FireDelayRightMouseDown = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
        If FireDelayRightMouseUp < 100 Then FireDelayRightMouseUp = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
    End Sub
    Private Sub Timer_tick(sender As Object, e As EventArgs)
        RunAimbot()
    End Sub


    Public Sub RunAimbot()

        Dim Amountfound As Long
        Dim AmountfoundCC1 As Long
        Dim CCAmount(0 To 1000) As Long
        Dim I As Long

        Dim lowestX As Long
        Dim lowestY As Long
        Dim highestX As Long
        Dim highestY As Long

        Dim TargetX As Long
        Dim TargetY As Long
        Dim TargetAmountFound As Long

        lowestX = 900
        lowestY = 900

        Dim avgHUE As Single
        Dim avgBrightness As Single
        Dim avgsaturation As Single

        Dim avgHueFound As Single
        Dim avgBrightnessFound As Single
        Dim avgsaturationFound As Single


        Dim AMountOfPixels As Single
        Dim FireTriggered As Single

        Dim YW As Single
        Dim X As Single
        Dim Y As Single

        Dim YW2 As Single
        Dim X2 As Single
        Dim Y2 As Single
        Dim YWY As Integer
        Dim YW2Y2 As Integer
        Dim CombinedLineFigure As Long

        Dim screenwidth = CInt(Screen.PrimaryScreen.Bounds.Width)
        Dim screenheight = CInt(Screen.PrimaryScreen.Bounds.Height)

        Dim g As Graphics
        Dim hdcDest As IntPtr = IntPtr.Zero
        Dim desktopHandleDC As IntPtr = IntPtr.Zero
        Dim desktopHandle As IntPtr

        'change scan size based on whether mouse in down or up

        SetScanRange()




        desktopHandle = GetActiveWindow()


        Dim R As Rectangle = New Rectangle(CInt((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2)) + AdjustRight, CInt((Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2)) + AdjustDown, ScanRange, ScanRange)


        Bmp = New Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                      Imaging.PixelFormat.Format32bppArgb,
                                      GCH.AddrOfPinnedObject)



        g = Graphics.FromImage(Bmp)
        desktopHandleDC = GetWindowDC(desktopHandle)
        hdcDest = g.GetHdc

        Dim gf As Integer
        Dim GH As Rectangle


        gf = GetWindowRect(desktopHandle, GH)



        Dim NewRectWidth As Integer
        Dim NewRectheight As Integer
        NewRectWidth = GH.Width - GH.Left
        NewRectheight = GH.Height - GH.Top


        BitBlt(hdcDest, 0, 0, ScanRange, ScanRange, desktopHandleDC, CInt((screenwidth / 2) - (ScanRange / 2) + AdjustRight), CInt((screenheight / 2) - (ScanRange / 2) + AdjustDown), CopyPixelOperation.SourceCopy)


        g.ReleaseHdc(hdcDest)
        ReleaseDC(desktopHandle, desktopHandleDC)
        Bmp.Dispose()
        g.Dispose() : g = Nothing



        Dim myColor As Color


        AMountOfPixels = ScanRange * ScanRange

        For X = 3 To ScanRange - 4
            YW = X * ScanRange
            For Y = 3 To ScanRange - 4
                YWY = YW + Y
                myColor = Color.FromArgb((Pixels(YWY)))

                Pixels_Hue(YWY) = myColor.GetHue
                Pixels_Brightness(YWY) = myColor.GetBrightness
                Pixels_Saturation(YWY) = myColor.GetSaturation
                Pixels_R(YWY) = myColor.R

                avgHUE = avgHUE + Pixels_Hue(YWY)
                avgBrightness = avgBrightness + Pixels_Brightness(YWY)
                avgsaturation = avgsaturation + Pixels_Saturation(YWY)

                If NonWhiteCrosshair = 1 Then
                    'sniper zoom fix
                    If Pixels_Hue(YWY) = 0 And Pixels_Saturation(YWY) = 0 And Pixels_Brightness(YWY) = 1 And CheckRightMouse() = 1 And (LastFireTick + FireDelayRightMouseDown) <= GetTickCount Then
                        AmountOfPureWhiteFound = AmountOfPureWhiteFound + 1
                        If AmountOfPureWhiteFound > 20 Then
                            'fix for sniper red in zoom with large scan range =/

                            LastFireTick = LastFireTick + 150
                        End If
                    End If
                End If

                If Pixels_Hue(YWY) < RedOrangeRange Or Pixels_Hue(YWY) > RedVioletRange Then
                    If Pixels_Brightness(YWY) > MinBrightness And Pixels_Brightness(YWY) < MaxBrightness And Pixels_Saturation(YWY) > MinSaturation And Pixels_R(YWY) > MinRed Then ' Target by hue to bypass 1.12

                        Amountfound = Amountfound + 1

                        'DEBUG
                        'RichTextBox1.AppendText("HUE=" & (myColor.GetHue()).ToString & vbTab & "SAT=" & myColor.GetSaturation().ToString & vbTab & "BGT=" & (myColor.GetBrightness()).ToString & vbTab & myColor.R & vbNewLine)

                        If lowestX > X Then
                            lowestX = X
                        End If
                        If lowestY > Y Then
                            lowestY = Y
                        End If
                        If highestY < Y Then
                            highestY = Y
                        End If
                        If highestX < X Then
                            highestX = X
                        End If

                        'advanced comparison

                        For X2 = (X - 3) To (X + 3)
                            YW2 = X2 * ScanRange
                            For Y2 = (Y - 3) To (Y + 3)
                                YW2Y2 = YW2 + Y2
                                'x2=0 and y2=0 produces additional triggered pixel

                                If Pixels_Hue(YW2Y2) < RedOrangeRange Or Pixels_Hue(YW2Y2) > RedVioletRange Then
                                    If Pixels_Brightness(YW2Y2) > MinBrightness And Pixels_Brightness(YW2Y2) < MaxBrightness And Pixels_Saturation(YW2Y2) > MinSaturation And Pixels_R(YW2Y2) > MinRed Then ' Target by hue to bypass 1.12
                                        AmountfoundCC1 = AmountfoundCC1 + 1
                                    End If
                                End If

                            Next Y2
                        Next X2




                        'target x/y
                        If CheckRightMouse() = 0 Then
                            If AmountfoundCC1 >= 1 And AmountfoundCC1 <= 13 Then
                                TargetY = TargetY + Y  'settings for right mouse up
                                TargetX = TargetX + X
                                TargetAmountFound = TargetAmountFound + 1


                                If Pixels_Hue(YWY) <= RedOrangeRange Then 'RedOrangeRange
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY) + 360 'beta test
                                Else
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY)
                                End If


                                avgBrightnessFound = avgBrightnessFound + Pixels_Brightness(YWY)
                                avgsaturationFound = avgsaturationFound + Pixels_Saturation(YWY)
                            End If
                            'Next I
                        Else
                            ' For I = 2 To 19
                            If AmountfoundCC1 >= 2 And AmountfoundCC1 <= 19 Then
                                TargetY = TargetY + Y  'settings for right mouse down
                                TargetX = TargetX + X
                                TargetAmountFound = TargetAmountFound + 1

                                If Pixels_Hue(YWY) <= RedOrangeRange Then 'RedOrangeRange
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY) + 360 'beta test
                                Else
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY)
                                End If
                                'avgHueFound = avgHueFound + Pixels_Hue(YWY) 'beta test
                                avgBrightnessFound = avgBrightnessFound + Pixels_Brightness(YWY)
                                avgsaturationFound = avgsaturationFound + Pixels_Saturation(YWY)
                                '  Next I
                            End If
                        End If


                            CCAmount(AmountfoundCC1) = CCAmount(AmountfoundCC1) + 1
                        AmountfoundCC1 = 0



                    End If
                End If
NExtY:
            Next Y
        Next X
        'combine line figures together
        If CheckRightMouse() = 0 Then
            For I = 1 To 13
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse up
            Next I
        Else
            For I = 2 To 19
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse down
            Next I
        End If


        '   CombinedLineFigure = CombinedLineFigure * 10
        ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)


        If CombinedLineFigure >= (ScanRange * 0.15) And (CombinedLineFigure * 1.33) >= Amountfound Then



            If (lowestX + (ScanRange * 0.15)) <= highestX And (lowestY + (ScanRange * 0.15)) <= highestY Then

                FireTriggered = 1
                '  RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
                ' RichTextBox1.AppendText("Fire" & vbNewLine)

            End If

        End If


        avgHUE = avgHUE / AMountOfPixels
        avgBrightness = avgBrightness / AMountOfPixels
        avgsaturation = avgsaturation / AMountOfPixels

        avgHueFound = avgHueFound / TargetAmountFound
        avgBrightnessFound = avgBrightnessFound / TargetAmountFound
        avgsaturationFound = avgsaturationFound / TargetAmountFound



        If avgHUE > 2 And avgHUE < 14 And avgBrightness < 0.45 And avgsaturation < 0.45 Then
            FireTriggered = 0 ' don't fire 
        End If

        If CheckRightMouse() = 0 Then 'adjust for zoom

            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringX Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringY Then
                FireTriggered = 0 ' don't fire
            End If
        Else 'while zoomed / hold down right click
            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringX * 2) Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringY * 2) Then
                FireTriggered = 0 ' don't fire
            End If


        End If

        If CheckKeyQ() = 1 And CheckRightMouse() = 0 Then
            LastFireTick = GetTickCount + 5000 'pressing Q for ultimate delays firing by 5 secs when mouse is up.  With widow use ultimate while zoomed to avoid delay.
        End If

        If FireTriggered = 1 Then
            Fire()
        End If




        'debug and testing
        ' If LastFireTick = GetTickCount Then
        ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
        ' RichTextBox1.Text = ("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness)
        '  avgHueFound = avgHueFound Mod 360
        '   RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbTab & "avgHUEfound=" & avgHueFound & vbTab & "avgSATfound=" & avgsaturationFound & vbTab & "avgBGTfound=" & avgBrightnessFound & vbNewLine)
        'RichTextBox1.AppendText("low_x= " & lowestX & "high_x= " & highestX & "low_y= " & lowestY & "high_y= " & highestY)

        '   Dim i2 As Long
        '  For i2 = 0 To 30
        '  RichTextBox1.AppendText(CCAmount(i2) & vbTab)
        '  Next
        'RichTextBox1.AppendText(vbNewLine)
        '   RichTextBox1.AppendText(Math.Round((TargetX / TargetAmountFound) - ScanRange / 2) & " " & (Math.Round((TargetY / TargetAmountFound)) - ScanRange / 2) & vbNewLine)

        'moving mouse settings
        'aimbot target X = Math.Round((screenwidth / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight - not tested
        'aimbot target Y = Math.Round((screenheight / 2) + (TargetY / TargetAmountFound) - ScanRange / 2) + AdjustDown- not tested
        'Y axis might be reversed - (Y * -1) to fix


        '  RichTextBox1.AppendText(Math.Round((screenheight / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight & vbNewLine)


        '  End If

    End Sub
    Public Sub Fire()
        If (LastFireTick + FireDelayRightMouseDown) <= GetTickCount And CheckRightMouse() = 1 Then GoTo Fire
        If (LastFireTick + FireDelayRightMouseUp) <= GetTickCount And CheckRightMouse() = 0 Then
Fire:
            If CheckLeftMouse() = 0 Then 'don't fire when mouse is being manually clicked
                SendKeys.Send("k")
                '  RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbNewLine)
            End If
            LastFireTick = GetTickCount
        End If
    End Sub
    Public Function CheckRightMouse() As Long
        If GetAsyncKeyState(VK_RBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckLeftMouse() As Long
        If GetAsyncKeyState(VK_LBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckKeyQ() As Long
        If GetAsyncKeyState(VK_Q) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Sub SetScanRange()
        If CheckRightMouse() = 0 Then
            ScanRange = ScanRangeRightMouseUp 'settings for right mouse up
        Else
            ScanRange = ScanRangeRightMouseDown 'settings for right mouse down
        End If

    End Sub


    Private Sub CheckBox1_CheckedChanged(sender As Object, e As EventArgs) Handles CheckBox1.CheckedChanged
        Dim i As Long

        Application.DoEvents()
        Using g As Graphics = Graphics.FromHwnd(IntPtr.Zero)
            For i = 0 To 999
                SetScanRange()
                Dim rect As Rectangle = New Rectangle((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2) + AdjustRight, (Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2) + AdjustDown, ScanRange, ScanRange)
                Using lgb As New Drawing2D.LinearGradientBrush(rect, Color.Blue, Color.Blue, 90, True)

                    g.FillRectangle(lgb, rect)
                    Application.DoEvents()
                    If Not CheckBox1.CheckState = CheckState.Checked Then Exit Sub
                End Using
            Next i
        End Using

        CheckBox1.CheckState = CheckState.Unchecked
    End Sub


End Class

Version 10 released:

Better accuracy and temporarily stops triggerbot when chatting.

Imports System.Runtime.InteropServices


Public Class Form1
    'version 10
    'recommended to use with Mccree

    Private Declare Function GetTickCount Lib "kernel32" () As UInt32
    Public t As New Timer With {.Interval = 1}
    Public ScanRange As Long = 56

    Public Pixels(ScanRange * ScanRange + ScanRange) As Integer
    Public Pixels_Hue(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Brightness(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_Saturation(ScanRange * ScanRange + ScanRange) As Single
    Public Pixels_R(ScanRange * ScanRange + ScanRange) As Single
    Public LastFireTick As UInteger

    Dim AmountOfPureWhiteFound As Long

    Public ChartQuad(4) As Long

    'edit values below to modify triggerbot
    'autofire delay - 510 for mccree - 1400 for widow 
    Public FireDelayRightMouseDown As UInteger = 1400 'autofire delay when right mouse is down
    Public FireDelayRightMouseUp As UInteger = 510 'autofire delay when right mouse is up
    Public ScanRangeRightMouseDown As Long = 56  'amount of pixels to scan for sniper - right click down
    Public ScanRangeRightMouseUp As Long = 28 'amount of pixels to scan for right click up
    Public AdjustDown As Integer = -1 'optional - move scanning up/down depending on where window is - negative values allowed
    Public AdjustRight As Integer = -1  'optional - move scanning left/right depending on where window is - negative values allowed
    Public RedOrangeRange As Single = 13 ' adjust down to decrease targeting orange
    Public RedVioletRange As Single = 345 ' adjust up to decrease targeting violet
    Public MinBrightness As Single = 0.35 'minimum brightness of pixel range (0-1.00)
    Public MaxBrightness As Single = 0.8 'maximum brightness of pixel range (0-1.00)
    Public MinSaturation As Single = 0.3 'minimum saturation of pixel range (0-1.00)
    Public MinRed As Single = 110 'minimum red value of pixel (0-255) - set lower for darker maps
    'x/y might be inverted
    Public DistanceFromTargetBeforeFiringX As Long = 7 ' maximum distance from target in x to fire
    Public DistanceFromTargetBeforeFiringY As Long = 7 ' maximum distance from target in y to fire
    Public MinQuadrantRequired As Long = 2 ' minimum amount of pixels required in each quadrant

    Public NonWhiteCrosshair As Long = 1 ' change this to 1 to stop widow from auto firing while in zoom.  Crosshair cannot be a pure white for it to work if unzoomed.


    <DllImport("user32.dll")>
    Shared Function GetAsyncKeyState(ByVal vKey As System.Windows.Forms.Keys) As Short
    End Function

    Private Const VK_RBUTTON = &H2
    Private Const VK_LBUTTON = &H1
    Private Const VK_Q = &H51
    Private Const VK_RETURN = &HD

    <DllImport("user32.dll")>
    Private Shared Function ReleaseDC(ByVal hWnd As IntPtr, ByVal hDc As IntPtr) As IntPtr
    End Function
    <DllImport("user32.dll", SetLastError:=True)>
    Private Shared Function GetActiveWindow() As IntPtr
    End Function
    <DllImport("gdi32")>
    Public Shared Function BitBlt(ByVal hDestDC As IntPtr, ByVal X As Integer, ByVal Y As Integer, ByVal nWidth As Integer, ByVal nHeight As Integer, ByVal hSrcDC As IntPtr, ByVal SrcX As Integer, ByVal SrcY As Integer, ByVal Rop As Integer) As Boolean
    End Function
    Dim GCH As GCHandle = GCHandle.Alloc(Pixels, GCHandleType.Pinned)

    Dim Bmp As New Drawing.Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                  Imaging.PixelFormat.Format32bppArgb,
                                  GCH.AddrOfPinnedObject)

    <DllImport("user32.dll")>
    Private Shared Function GetWindowDC(ByVal hwnd As IntPtr) As IntPtr
    End Function

    Declare Function GetWindowRect Lib "user32.dll" (
ByVal hwnd As Int32,
ByRef lpRect As Rectangle) As Int32


    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
        If t.Enabled = 0 Then
            Button1.Text = "STOP"
            t.Enabled = 1
        Else
            Button1.Text = "START"
            t.Enabled = 0
        End If
    End Sub

    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
        AddHandler t.Tick, AddressOf Timer_tick
        If FireDelayRightMouseDown < 100 Then FireDelayRightMouseDown = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
        If FireDelayRightMouseUp < 100 Then FireDelayRightMouseUp = 100 ' don't make this too low to avoid suspicion - to make it lower use keypressdown and keypressup
    End Sub
    Private Sub Timer_tick(sender As Object, e As EventArgs)
        RunAimbot()
    End Sub


    Public Sub RunAimbot()

        Dim Amountfound As Long
        Dim AmountfoundCC1 As Long
        Dim CCAmount(0 To 1000) As Long
        Dim I As Long



        Dim TargetX As Long
        Dim TargetY As Long
        Dim TargetAmountFound As Long


        Dim avgHUE As Single
        Dim avgBrightness As Single
        Dim avgsaturation As Single

        Dim avgHueFound As Single
        Dim avgBrightnessFound As Single
        Dim avgsaturationFound As Single


        Dim AMountOfPixels As Single
        Dim FireTriggered As Single

        Dim YW As Single
        Dim X As Single
        Dim Y As Single

        Dim YW2 As Single
        Dim X2 As Single
        Dim Y2 As Single
        Dim YWY As Integer
        Dim YW2Y2 As Integer
        Dim CombinedLineFigure As Long

        Dim screenwidth = CInt(Screen.PrimaryScreen.Bounds.Width)
        Dim screenheight = CInt(Screen.PrimaryScreen.Bounds.Height)

        Dim g As Graphics
        Dim hdcDest As IntPtr = IntPtr.Zero
        Dim desktopHandleDC As IntPtr = IntPtr.Zero
        Dim desktopHandle As IntPtr

        'change scan size based on whether mouse in down or up

        SetScanRange()




        desktopHandle = GetActiveWindow()


        Dim R As Rectangle = New Rectangle(CInt((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2)) + AdjustRight, CInt((Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2)) + AdjustDown, ScanRange, ScanRange)


        Bmp = New Bitmap(ScanRange, ScanRange, 4 * ScanRange,
                                      Imaging.PixelFormat.Format32bppArgb,
                                      GCH.AddrOfPinnedObject)



        g = Graphics.FromImage(Bmp)
        desktopHandleDC = GetWindowDC(desktopHandle)
        hdcDest = g.GetHdc

        Dim gf As Integer
        Dim GH As Rectangle


        gf = GetWindowRect(desktopHandle, GH)



        Dim NewRectWidth As Integer
        Dim NewRectheight As Integer
        NewRectWidth = GH.Width - GH.Left
        NewRectheight = GH.Height - GH.Top


        BitBlt(hdcDest, 0, 0, ScanRange, ScanRange, desktopHandleDC, CInt((screenwidth / 2) - (ScanRange / 2) + AdjustRight), CInt((screenheight / 2) - (ScanRange / 2) + AdjustDown), CopyPixelOperation.SourceCopy)


        g.ReleaseHdc(hdcDest)
        ReleaseDC(desktopHandle, desktopHandleDC)
        Bmp.Dispose()
        g.Dispose() : g = Nothing



        Dim myColor As Color


        AMountOfPixels = ScanRange * ScanRange

        For X = 3 To ScanRange - 4
            YW = X * ScanRange
            For Y = 3 To ScanRange - 4
                YWY = YW + Y
                myColor = Color.FromArgb((Pixels(YWY)))

                Pixels_Hue(YWY) = myColor.GetHue
                Pixels_Brightness(YWY) = myColor.GetBrightness
                Pixels_Saturation(YWY) = myColor.GetSaturation
                Pixels_R(YWY) = myColor.R

                avgHUE = avgHUE + Pixels_Hue(YWY)
                avgBrightness = avgBrightness + Pixels_Brightness(YWY)
                avgsaturation = avgsaturation + Pixels_Saturation(YWY)

                If NonWhiteCrosshair = 1 Then
                    'sniper zoom fix
                    If Pixels_Hue(YWY) = 0 And Pixels_Saturation(YWY) = 0 And Pixels_Brightness(YWY) = 1 And CheckRightMouse() = 1 And (LastFireTick + FireDelayRightMouseDown) <= GetTickCount Then
                        AmountOfPureWhiteFound = AmountOfPureWhiteFound + 1
                        If AmountOfPureWhiteFound > 20 Then
                            'fix for sniper red in zoom with large scan range =/

                            LastFireTick = LastFireTick + 150
                        End If
                    End If
                End If

                If Pixels_Hue(YWY) < RedOrangeRange Or Pixels_Hue(YWY) > RedVioletRange Then
                    If Pixels_Brightness(YWY) > MinBrightness And Pixels_Brightness(YWY) < MaxBrightness And Pixels_Saturation(YWY) > MinSaturation And Pixels_R(YWY) > MinRed Then ' Target by hue to bypass 1.12

                        Amountfound = Amountfound + 1

                        'DEBUG
                        'RichTextBox1.AppendText("HUE=" & (myColor.GetHue()).ToString & vbTab & "SAT=" & myColor.GetSaturation().ToString & vbTab & "BGT=" & (myColor.GetBrightness()).ToString & vbTab & myColor.R & vbNewLine)



                        'advanced comparison

                        For X2 = (X - 3) To (X + 3)
                            YW2 = X2 * ScanRange
                            For Y2 = (Y - 3) To (Y + 3)
                                YW2Y2 = YW2 + Y2
                                'x2=0 and y2=0 produces additional triggered pixel

                                If Pixels_Hue(YW2Y2) < RedOrangeRange Or Pixels_Hue(YW2Y2) > RedVioletRange Then
                                    If Pixels_Brightness(YW2Y2) > MinBrightness And Pixels_Brightness(YW2Y2) < MaxBrightness And Pixels_Saturation(YW2Y2) > MinSaturation And Pixels_R(YW2Y2) > MinRed Then ' Target by hue to bypass 1.12
                                        AmountfoundCC1 = AmountfoundCC1 + 1
                                    End If
                                End If

                            Next Y2
                        Next X2




                        'target x/y
                        If CheckRightMouse() = 0 Then
                            If AmountfoundCC1 >= 1 And AmountfoundCC1 <= 13 Then
                                TargetY = TargetY + Y  'settings for right mouse up
                                TargetX = TargetX + X

                                CheckXYRange(X, Y)

                                TargetAmountFound = TargetAmountFound + 1



                                If Pixels_Hue(YWY) <= RedOrangeRange Then 'RedOrangeRange
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY) + 360 'beta test
                                Else
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY)
                                End If


                                avgBrightnessFound = avgBrightnessFound + Pixels_Brightness(YWY)
                                avgsaturationFound = avgsaturationFound + Pixels_Saturation(YWY)
                            End If
                            'Next I
                        Else
                            ' For I = 2 To 19
                            If AmountfoundCC1 >= 2 And AmountfoundCC1 <= 19 Then
                                TargetY = TargetY + Y  'settings for right mouse down
                                TargetX = TargetX + X

                                CheckXYRange(X, Y)

                                TargetAmountFound = TargetAmountFound + 1

                                If Pixels_Hue(YWY) <= RedOrangeRange Then 'RedOrangeRange
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY) + 360 'beta test
                                Else
                                    avgHueFound = avgHueFound + Pixels_Hue(YWY)
                                End If
                                'avgHueFound = avgHueFound + Pixels_Hue(YWY) 'beta test
                                avgBrightnessFound = avgBrightnessFound + Pixels_Brightness(YWY)
                                avgsaturationFound = avgsaturationFound + Pixels_Saturation(YWY)
                                '  Next I
                            End If
                        End If


                            CCAmount(AmountfoundCC1) = CCAmount(AmountfoundCC1) + 1
                        AmountfoundCC1 = 0



                    End If
                End If
NExtY:
            Next Y
        Next X
        'combine line figures together
        If CheckRightMouse() = 0 Then
            For I = 1 To 13
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse up
            Next I
        Else
            For I = 2 To 19
                CombinedLineFigure = CombinedLineFigure + CCAmount(I)  'settings for right mouse down
            Next I
        End If


        '   CombinedLineFigure = CombinedLineFigure * 10
        ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)


        If CombinedLineFigure >= (ScanRange * 0.15) And (CombinedLineFigure * 1.33) >= Amountfound Then





            FireTriggered = 1
            '  RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
            ' RichTextBox1.AppendText("Fire" & vbNewLine)



        End If


        avgHUE = avgHUE / AMountOfPixels
        avgBrightness = avgBrightness / AMountOfPixels
        avgsaturation = avgsaturation / AMountOfPixels

        avgHueFound = avgHueFound / TargetAmountFound
        avgBrightnessFound = avgBrightnessFound / TargetAmountFound
        avgsaturationFound = avgsaturationFound / TargetAmountFound



        If avgHUE > 2 And avgHUE < 14 And avgBrightness < 0.45 And avgsaturation < 0.45 Then
            FireTriggered = 0 ' don't fire 
        End If


        If CheckRightMouse() = 0 Then 'adjust for zoom

            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringX Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > DistanceFromTargetBeforeFiringY Then
                FireTriggered = 0 ' don't fire
            End If
        Else 'while zoomed / hold down right click
            If Math.Abs((TargetX / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringX * 2) Then
                FireTriggered = 0 ' don't fire
            End If

            If Math.Abs((TargetY / TargetAmountFound) - (ScanRange / 2)) > (DistanceFromTargetBeforeFiringY * 2) Then
                FireTriggered = 0 ' don't fire
            End If


        End If

        If CheckKeyQ() = 1 And CheckRightMouse() = 0 Then
            LastFireTick = GetTickCount + 5000 'pressing Q for ultimate delays firing by 5 secs when mouse is up.  With widow use ultimate while zoomed to avoid delay.
        End If

        If CheckKeyENTER() = 1 Then
            LastFireTick = GetTickCount + 1500 'disable aimbot while chatting
        End If

        If QuadrantCheck() = 0 Then
            FireTriggered = 0 ' don't fire 
        End If


        If FireTriggered = 1 Then
            Fire()
        End If




        'debug and testing
        '  If LastFireTick = GetTickCount Then

        ' RichTextBox1.AppendText("CombinedLineFigure=" & CombinedLineFigure & vbTab & "Amountfound=" & Amountfound & vbNewLine)
        ' RichTextBox1.Text = ("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness)
        '  avgHueFound = avgHueFound Mod 360
        '   RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbTab & "avgHUEfound=" & avgHueFound & vbTab & "avgSATfound=" & avgsaturationFound & vbTab & "avgBGTfound=" & avgBrightnessFound & vbNewLine)

        '   Dim i2 As Long
        '  For i2 = 0 To 30
        '  RichTextBox1.AppendText(CCAmount(i2) & vbTab)
        '  Next
        'RichTextBox1.AppendText(vbNewLine)
        'RichTextBox1.AppendText(Math.Round((TargetX / TargetAmountFound) - ScanRange / 2) & " " & (Math.Round((TargetY / TargetAmountFound)) - ScanRange / 2) & vbNewLine)


        '  RichTextBox1.AppendText(ChartQuad(1) & " " & ChartQuad(2) & " " & ChartQuad(3) & " " & ChartQuad(4) & vbNewLine)



        'moving mouse settings
        'aimbot target X = Math.Round((screenwidth / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight - not tested
        'aimbot target Y = Math.Round((screenheight / 2) + (TargetY / TargetAmountFound) - ScanRange / 2) + AdjustDown- not tested
        'Y axis might be reversed - (Y * -1) to fix


        'RichTextBox1.AppendText(Math.Round((screenheight / 2) + (TargetX / TargetAmountFound) - ScanRange / 2) + AdjustRight & vbNewLine)


        'End If
        Array.Clear(ChartQuad, 0, ChartQuad.Length) 'move to QuadrantCheck function later
    End Sub
    Public Sub Fire()
        If (LastFireTick + FireDelayRightMouseDown) <= GetTickCount And CheckRightMouse() = 1 Then GoTo Fire
        If (LastFireTick + FireDelayRightMouseUp) <= GetTickCount And CheckRightMouse() = 0 Then
Fire:
            If CheckLeftMouse() = 0 Then 'don't fire when mouse is being manually clicked
                SendKeys.Send("k")
                '  RichTextBox1.AppendText("avgHUE=" & avgHUE & vbTab & "avgSAT=" & avgsaturation & vbTab & "avgBGT=" & avgBrightness & vbNewLine)
            End If
            LastFireTick = GetTickCount
        End If
    End Sub
    Public Function CheckRightMouse() As Long
        If GetAsyncKeyState(VK_RBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckLeftMouse() As Long
        If GetAsyncKeyState(VK_LBUTTON) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckKeyQ() As Long
        If GetAsyncKeyState(VK_Q) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Function CheckKeyENTER() As Long
        If GetAsyncKeyState(VK_RETURN) <> 0 Then
            Return 1
        End If
        Return 0
    End Function
    Public Sub SetScanRange()
        If CheckRightMouse() = 0 Then
            ScanRange = ScanRangeRightMouseUp 'settings for right mouse up
        Else
            ScanRange = ScanRangeRightMouseDown 'settings for right mouse down
        End If

    End Sub


    Private Sub CheckBox1_CheckedChanged(sender As Object, e As EventArgs) Handles CheckBox1.CheckedChanged
        Dim i As Long

        Application.DoEvents()
        Using g As Graphics = Graphics.FromHwnd(IntPtr.Zero)
            For i = 0 To 999
                SetScanRange()
                Dim rect As Rectangle = New Rectangle((Screen.PrimaryScreen.Bounds.Width / 2) - (ScanRange / 2) + AdjustRight, (Screen.PrimaryScreen.Bounds.Height / 2) - (ScanRange / 2) + AdjustDown, ScanRange, ScanRange)
                Using lgb As New Drawing2D.LinearGradientBrush(rect, Color.Blue, Color.Blue, 90, True)

                    g.FillRectangle(lgb, rect)
                    Application.DoEvents()
                    If Not CheckBox1.CheckState = CheckState.Checked Then Exit Sub
                End Using
            Next i
        End Using

        CheckBox1.CheckState = CheckState.Unchecked
    End Sub
    Public Sub CheckXYRange(x As Long, y As Long)
        x = x - (ScanRange / 2)
        y = y - (ScanRange / 2)

        If x < 0 And y < 0 Then
            ChartQuad(3) = ChartQuad(3) + 1
        End If

        If x < 0 And y > 0 Then
            ChartQuad(2) = ChartQuad(2) + 1
        End If

        If x > 0 And y < 0 Then
            ChartQuad(4) = ChartQuad(4) + 1
        End If

        If x > 0 And y > 0 Then
            ChartQuad(1) = ChartQuad(1) + 1
        End If



    End Sub

    Public Function QuadrantCheck() As Long
        Dim i As Long
        Dim QuadNumber As Long

        For i = 1 To 4
            If ChartQuad(i) >= MinQuadrantRequired Then
                QuadNumber = QuadNumber + 1
            End If
        Next i
        ' Array.Clear(ChartQuad, 0, ChartQuad.Length)
        If QuadNumber < 3 Then
            Return 0
        End If
        Return 1
    End Function
    Private Sub RichTextBox1_TextChanged(sender As Object, e As EventArgs)

    End Sub
End Class

[Devonted]

Is this currently not detected? How is this not detected?

I've done some playtesting with this and for the most part, it is quality. I don't know enough to be a judge on this, these aren't meant to be my way of judging more just to document my experience with it in hopes that my experience with it helps better it.

1. It detects colors that aren't the best to shoot at.
2. It shoots outside of the target very often.
3. It finds itself delaying very often [You sit there expecting the next shot]
4. Distance is a big issue, if you are mid range it will trigger often, if you get further or they get too close it will not shoot.

[Alecthro]

Awesome work CC! Just have a few questions / issues with it, that maybe you can fix and answer.

1) I find when playing McCree the "wait time" is pretty variable. Sometimes it will shoot right after the next one, sometimes it takes a full second to shoot the next bullet.

2) Whne playing widow it works pretty damn good, however I am noticing that it shoots randomly at times when I'm even close to pointing at the enemy. It'll just randomly shoot a wall. Also her ult really fucks with it. Due to how this works, I don't think there is really a way you can fix that (though I thought it was to rule out blobs of red, so I'm not entirely sure).

3) Is there anyway we can get this to work in borderless windowed? Or does it have to be in windowed all the time?

[Devonted]

Awesome work CC! Just have a few questions / issues with it, that maybe you can fix and answer.

1) I find when playing McCree the "wait time" is pretty variable. Sometimes it will shoot right after the next one, sometimes it takes a full second to shoot the next bullet.

2) Whne playing widow it works pretty damn good, however I am noticing that it shoots randomly at times when I'm even close to pointing at the enemy. It'll just randomly shoot a wall. Also her ult really fucks with it. Due to how this works, I don't think there is really a way you can fix that (though I thought it was to rule out blobs of red, so I'm not entirely sure).

3) Is there anyway we can get this to work in borderless windowed? Or does it have to be in windowed all the time?

I have the same issue as #1

I believe the widowmaker ultimate can nullify the triggerbot by not firing based on more pixels in an area [Blobbing], A work around until something can be done about it is to use your venom mine and only use your ultimate while you are running back to your teammates. That way you get to use it and you don't do anything obvious/suspicious.

I have tried it in Borderless window with no issues.

[CCaimbot]

Is this currently not detected? How is this not detected?

I've done some playtesting with this and for the most part, it is quality. I don't know enough to be a judge on this, these aren't meant to be my way of judging more just to document my experience with it in hopes that my experience with it helps better it.

1. It detects colors that aren't the best to shoot at.

The colors it detects are mostly the exact same colors that outline an enemy. I've looked at screenshots and had the triggerbot output color data that proves this. Sometimes an outline will actually be a brownish color not red.

2. It shoots outside of the target very often.

Because there's colors throughout maps that match outline colors.

3. It finds itself delaying very often [You sit there expecting the next shot]

Why it delays could be due to a number of things. First try swinging your cursor a little bit on the enemy instead of standing still. That way it gets different values and is more likely to fire. Then you can try adjusting the settings. You can:

1. Decrease MinQuadrantRequired
2. Change "CombinedLineFigure * 1.33" to "CombinedLineFigure * 1.5" (or higher number)
3. Change "CombinedLineFigure >= (ScanRange * 0.15)" to "CombinedLineFigure >= (ScanRange * 0.10)" (or lower number)
4. Increase DistanceFromTargetBeforeFiringX and DistanceFromTargetBeforeFiringY (this will cause it to shoot away from enemy more often though)
5. Adjust hue it targets by changing RedOrangeRange and RedVioletRange
6. Decrease MinBrightness, MinSaturation, and MinRed. (for darker areas)
7. Increase MaxBrightness
8. Make crosshair more minimal.
9. Try to target one enemy by itself at a time. If there's two or more enemies then the triggerbot might only fire at the midpoint between them.
10. Avoid aiming at certain areas as such Junkertown dirt road and canyons.

4. Distance is a big issue, if you are mid range it will trigger often, if you get further or they get too close it will not shoot.

If a big enemy is close you don't need a triggerbot. Just start shooting. The same goes for shields. The triggerbot will detect your mouse clicks and stops temporarily. It does have more trouble at a distance but I find that it's mostly due to outline color changes rather than how small the enemy is. If the map has a lot of fog the outline will turn too grayish for the triggerbot to target.

Awesome work CC! Just have a few questions / issues with it, that maybe you can fix and answer.

1) I find when playing McCree the "wait time" is pretty variable. Sometimes it will shoot right after the next one, sometimes it takes a full second to shoot the next bullet.

Change settings to make triggerbot more sensitive to shoot. You'll have to use guesswork to figure it out. For example if it's not shooting in dark areas change MinBrightness, MinSaturation, and MinRed. If it's not shooting when an enemy is far away then change "CombinedLineFigure * 1.33" to "CombinedLineFigure * 1.5" and Decrease MinQuadrantRequired. Also lowering scanrange a little helps if you're shooting far away at multiple enemies.

2) Whne playing widow it works pretty damn good, however I am noticing that it shoots randomly at times when I'm even close to pointing at the enemy. It'll just randomly shoot a wall. Also her ult really fucks with it. Due to how this works, I don't think there is really a way you can fix that (though I thought it was to rule out blobs of red, so I'm not entirely sure).

The problem is that throughout maps there are red pixels that aren't blobs as well. You'll have to learn to avoid aiming at these places. Some walls/floors will cause the triggerbot to keep shooting.

I have the same issue as #1

I believe the widowmaker ultimate can nullify the triggerbot by not firing based on more pixels in an area [Blobbing],

I don't think so because enemies are red blobs only behind walls but when they are visible they aren't red blobs anymore.


If you want the triggerbot to be more precise but less likely to fire try lowering these settings:

Public DistanceFromTargetBeforeFiringX As Long = 6 ' maximum distance from target in x to fire
    Public DistanceFromTargetBeforeFiringY As Long = 6 ' maximum distance from target in y to fire

How the triggerbot works is by taking all the coordinates of pixels it detects and then averages them out to make a point. If this point is within 6 pixels x/y of your crosshair then it'll fire. So by making it smaller it'll shoot only when it's closer to this point.

And increasing this setting:

    Public MinQuadrantRequired As Long = 3 ' minimum amount of pixels required in each quadrant

Version 10 has this added which requires at least 3 quadrants to have at least 3 pixels that match the color. There's a quadrant bottom left, bottom right, top right, top left of the crosshair.

[Alecthro]

-snip-


If you want the triggerbot to be more precise but less likely to fire try lowering these settings:

Public DistanceFromTargetBeforeFiringX As Long = 6 ' maximum distance from target in x to fire
    Public DistanceFromTargetBeforeFiringY As Long = 6 ' maximum distance from target in y to fire

How the triggerbot works is by taking all the coordinates of pixels it detects and then averages them out to make a point. If this point is within 6 pixels x/y of your crosshair then it'll fire. So by making it smaller it'll shoot only when it's closer to this point.

So would this make it so it wont trigger unless its exactly on top of them? For example, if I lowered it to 1, or 2, and am playing widow, currently it sometimes shoots when they get close. If i changed this setting would it not shoot unless it was "on the line"?

[sweetpots]

i dont understand how can i get this working? can anyone help please

[CCaimbot]

So would this make it so it wont trigger unless its exactly on top of them? For example, if I lowered it to 1, or 2, and am playing widow, currently it sometimes shoots when they get close. If i changed this setting would it not shoot unless it was "on the line"?

Ideally it would but usually not. If the blue box isn't big enough to wrap around the whole enemy the triggerbot will only get the red outline of part of the enemy which means the point it makes to target won't be in the middle of the enemy. If the blue box is too big then it'll get nearby enemies and the HP bar and mess up the triggerbot as well.

If you change it to 2 then your crosshair would have to fall under a 4x4 pixel box inside the enemy so it shouldn't fire as often.

If the number is too high then what ends up happening is that it'll fire while your crosshair is outside an enemy. This is because the triggerbot will make a large pixel box based on one side of the red outline.

[Alecthro]

Ideally it would but usually not. If the blue box isn't big enough to wrap around the whole enemy the triggerbot will only get the red outline of part of the enemy which means the point it makes to target won't be in the middle of the enemy. If the blue box is too big then it'll get nearby enemies and the HP bar and mess up the triggerbot as well.

If you change it to 2 then your crosshair would have to fall under a 4x4 pixel box inside the enemy so it shouldn't fire as often.

If the number is too high then what ends up happening is that it'll fire while your crosshair is outside an enemy. This is because the triggerbot will make a large pixel box based on one side of the red outline.

Understood. For Widow's purpose I can see it being 2 as a good spot, specially if you use the "red dot" cursor, since its fairly small regardless.

I still can't get it to work in Bordless Windowed for some reason. It may be because I'm on Win 10 or have dual monitors. Not a huge deal though.

[Devonted]

This isn't good enough to actually assist as it currently sits if you actually have good aim. That being said this is an assistive tool for lower skilled players. Not saying that it won't see the daylight where it reaches its peak so to speak and I'll enjoy watching it build its way up. Great work so far.

[dawaffle21]

can someone build it for me i dont have the resources in virtual studio

[nochillkowa]

Hi, so according to the instruction video, after you build -> you go to your documents -> visual studio -> projects. But when I go to the visual studio folder, there's no "projects" folder. Can anyone help? I know this is a noob question.

[dawaffle21]

can someone build it for me i dont have the resources in virtual studio

Never mind I did it at school xd. Its pretty alright for McCree. Defiantly the best trigger bot rn. I do agree with @alecthro that the firing time varies a bit. Sometimes it fire a headshot when I'm barley looking at someone for no more than half a second. and sometimes its a second delay and sometimes in the middle. I notice on larger map distances it makes it harder for it to hit a target. on Hollywood i was playing and it was almost instant and on junkertown on the bridge it took it time to hit a target. That's just my experience with it . Not too bad my friend