Results 1 to 5 of 5
  1. #1
    New User
    Reputation
    1
    Join Date
    Jan 2009
    Posts
    3
    CoreCoins
    0

    Trade Feedbacks

    Status
    n/a
    Positive
    0 (0%)
    Negative
    0 (0%)

    Help Me, Plz fix my IP in configs for online



    Donate to Remove Ads, Get ShoutBawx - Elite Forum Access
    I can run sevr offline, but i need set IP for othen player to join in my server

    plz help me to fix 222.123.14.187

    in Configs Serv ArcEmu 2.4.3


    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 425 by neo_mat
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    # LogonDatabase Section
    #
    # These directives are the location of the `realms` and `accounts`
    # tables.
    #
    # LogonDatabase.Host - The hostname that the database is located on
    # LogonDatabase.Username - The username used for the mysql connection
    # LogonDatabase.Password - The password used for the mysql connection
    # LogonDatabase.Name - The database name
    # LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
    # LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #

    <LogonDatabase Hostname = "localhost"
    Username = "root"
    Password = "root"
    Name = "characters"
    Port = "3306"
    Type = "1">


    # Host Directive
    #
    # This is the address that the realmlist will listen on.
    # To listen on all addresses, set it to 0.0.0.0
    # Default: 127.0.0.1 (localhost)
    #
    # Note: ISHost is the interserver communication listener.
    #

    <Listen Host = "0.0.0.0"
    ISHost = "0.0.0.0"
    RealmListPort = "3724"
    ServerPort = "8093">

    # Server console logging level
    #
    # This directive controls how much output the server will
    # display in it's console. Set to 0 for none.
    # 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    # Default: 3
    #

    <LogLevel Screen = "0"
    File = "-1">

    # Account Refresh Time
    #
    # This controls on which time interval accounts gets
    # refreshed. (In seconds)
    # Default = 600
    #

    <Rates AccountRefresh = "600">

    # Accepted Build Range Setup
    #
    # These two directives set up which clients will be
    # allowed to authenticate with the realm list.
    #
    # Set these to the same builds that the server was
    # compiled for.
    #
    # As of the last update, version 2.1.1 was build 6739.
    #

    <Client MinBuild = "8606"
    MaxBuild = "8606">

    # WorldServer Setup
    #
    # RemotePassword
    # This directive controls the password used to authenticate with the worldserver.
    # It must be the same between the two configs. If it is not, your server will
    # not register.
    #
    # Default: "change_me_logon"
    #
    # AllowedIPs
    # This section MUST be completed, otherwise all attempts to link your servers will fail.
    # These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
    # to make server connections to your logonserver, and register realms.
    # For example, everything in the 127.0.0.* range would be:
    # 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
    #
    # To allow a single IP,
    # 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
    #
    # AllowedModIPs
    # In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
    # (adding bans, GMs, account permissions, etc)
    #

    <LogonServer RemotePassword = "youtube"
    AllowedIPs = "127.0.0.1/32"
    AllowedModIPs = "127.0.0.1/32">
    ###########################################################################
    # ArcEmu Optional Configuration File
    # Last Update: $Id: arcemu-optional.conf 309 2008-06-03 14:29:43Z tazjin $
    #
    # This configuration file contains all non-blizzlike values.
    ###########################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Optional Settings
    #
    # Starting Level
    # This controls at which level characters are created. Range is from 1-70.
    # Default: 1
    #
    # Level Cap
    # This variable controls the level that stats will be generated up to internally.
    # Beyond this level players can still see a higher level visually but their stats won't
    # increase beyond this point.
    # Default: 70
    #
    # Generated Level Level Cap
    # This variable controls the level at which stats will generate up to. Generally the formulas go
    # crazy after level 70 so this way you can keep the high visual but stats at a reasonable value.
    # Default: 70
    #
    # Allow The Burning Crusade characters
    # This will override account settings, so you can disable TBC from your server without having to mess with accounts.
    # Default: 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Optional StartingLevel = "1"
    LevelCap = "800"
    GenLevelCap = "800"
    AllowTBC = "1"
    AntiMasterLootNinja = "0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Interfaction Options
    #
    # InterfactionChat
    # This directive controls whether horde and alliance players can talk to each other.
    # Default: 0 (disabled)
    #
    # InterfactionGroup
    # This directive controls whether horde and alliance players are able to build a group together.
    # Default: 0 (disabled)
    #
    # InterfactionGuild
    # This directive controls whether horde and alliance players are able to build crossfaction guilds
    # Default: 0 (disabled)
    #
    # InterfactionTrade
    # This directive controls whether horde and alliance players can trade with each other.
    # Default: 0 (disabled)
    #
    # InterfactionFriends
    # If this is enabled players can add other players from the opposite faction to their friends list
    # Default: 0 (disabled)
    #
    # InterfactionMisc
    # This directive controls whether horde and alliance players are able to use different functions
    # on players of the opposite faction. This includes e.g. using the /who command.
    # Default: 0 (disabled)
    #
    # CrossOverCharacters
    # If this is enabled players are able to create both, horde and alliance characters on a PVP realm.
    # Default: 0 (disabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Interfaction InterfactionChat="0"
    InterfactionGroup="0"
    InterfactionGuild="0"
    InterfactionTrade="0"
    InterfactionFriends="0"
    InterfactionMisc="0"
    CrossOverCharacters="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Color Configuration
    # Announce
    # AnnTagColor
    # This controls which color the [] tag in front of announces has.
    # Default: 2 (Light Blue)
    #
    # AnnGMTagColor
    # This controls the color of the GM/Admin tag in announces. Only enabled if GMAdminTag is set to 1.
    # Default: 1 (Light red)
    #
    # AnnNameColor
    # This controls the color of the gamemaster's name in announces.
    # Default: 4 (Green)
    #
    # AnnMsgColor
    # This controls the color of message in announces.
    # Default: 6 (Gold)
    #
    #
    # You can choose one of the colors below.
    # LightRed = 1
    # LightBlue = 2
    # Blue = 3
    # Green = 4
    # Red = 5
    # Gold = 6
    # Grey = 7
    # White = 8
    # Magenta = 9
    # Yellow = 10
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Color AnnTagColor = "2"
    AnnGMTagColor = "1"
    AnnNameColor = "4"
    AnnMsgColor = "6">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Extra Scripts Configuration
    #
    # Instant70
    # Enables Instant70 mode.
    #
    # PvPToken
    # This directive enables item rewards when there is a PvP Kill and players are level 70
    #
    # PvPTokenID
    # If PvPToken is enabled, specify the item ID of your custom Token ID, or any other item
    #
    # L70etc
    # Enables L70etc Band Gossip script.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Extra Instant70="0" PvPToken="0" PvPTokenID="13905" PvPKillAnnounce="0" Portals="0" L70etc="0" WeddingNPC="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GameMaster Configuration
    #
    # ListOnlyActiveGMs
    # List only gamemasters with enabled GMFlag to players without any permissions.
    #
    # HidePermissions
    # Hides permission flags from players without any permissions.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <GameMaster ListOnlyActiveGMs = "0"
    HidePermissions = "0">

    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 336 by Dameon
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    # Address:
    # The address (no port) of the server.
    #
    # Port:
    # The port on which the logon server listens. (*** NOT 3724 ***)
    #
    # Name:
    # Not really relavant, but name the logon.
    #
    # RealmCount:
    # The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Logon"
    RealmCount = "1">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    # Name:
    # The name of the realm.
    #
    # Address:
    # The address (and port) of that realm.
    #
    # Icon:
    # The type of realm (PVP, Normal, RPPVP, RP)
    #
    # TimeZone:
    # Time zone the realm is in.
    #
    # Population:
    # (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Realm1 Name = "YouTube Server"
    Address = "127.0.0.1:8129"
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "1">



    #######################################################################
    # ArcEmu Configuration File
    # Last Update: $Id: arcemu-world.conf 336 by Dameon $
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    # Database.Host - The hostname that the database is located on
    # Database.Username - The username used for the mysql connection
    # Database.Password - The password used for the mysql connection
    # Database.Name - The database name
    # Database.Port - Port that MySQL listens on. Usually 3306.
    # Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <WorldDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "arcemu" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "characters" Port = "3306" Type = "1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    # Host
    # This is the address that the server will listen on.
    # To listen on all addresses, set it to 0.0.0.0
    # Default: 127.0.0.1 (localhost)
    #
    # WorldServerPort
    # This is the port that the world server listens on.
    # It has to be the same as what is specified in the
    # realms table in the LogonDatabase.
    # Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Listen Host = "0.0.0.0"
    WorldServerPort = "8129">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    # Console Logging Level
    # This directive controls how much output the server will
    # display in it's console. Set to 0 for none, or -1 to disable.
    # -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    # Default: 3
    #
    # World server packet logging feature
    # If this directive is turned on, a file called `world.log`
    # will be created in the server's directory and all packets
    # sent and received by clients will be dumped here in bfg
    # format.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogLevel Screen="0" File="-1" World="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Server Settings
    #
    # PlayerLimit
    # This directive controls the amount of sessions that will be
    # accepted by the server before it starts to add people to
    # the server queue.
    # Default: 100
    #
    # Motd
    # This message will be displayed by the server in the chat
    # box every time any user logs on. Colors can be used in the
    # standard WoW format.
    # Default: "No MOTD specified
    #
    # Send Stats On Join
    # This directive controls whether the server will send the online player
    # count to a cilent when it enters the world.
    #
    # Breathing Setup
    # If the breathing code is causing problems or you want to run a fun server, you can disable
    # water checks by enabling this directive.
    # Default: 1
    #
    # Seperate Channels Control
    # This directive controls whether horde and alliance chats will be seperated across channels.
    # Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    # across channels.
    # Default: 0
    #
    # Compression Threshold
    # This directive controls the limit when update packets will be compressed using deflate.
    # For lower-bandwidth servers use a lower value at the cost of cpu time.
    # Default: 1000
    #
    # Queue Update Rate
    # This directive controls how many milliseconds (ms) between the updates
    # that the queued players receieve telling them their position in the queue.
    # Default: 5000 (5 seconds).
    #
    # Kick AFK Players
    # Time in milliseconds (ms) that a player will be kicked after they go afk.
    # Default: 0 (disabled)
    #
    # Connection Timeout
    # This directive specifies the amount of seconds that the client will be disconnected
    # after if no ping packet is sent. It is advised to leave it at the default.
    # Default: 180
    #
    # Realm Type
    # This is the realm type that will be used by the server to handle world pvp.
    # Default: 0 (pve)(RPPVE)
    # Other values: 1(pvp)(RPPVP)
    #
    # AdjustPriority
    # Set the server to high process priority?
    # Default: 0
    #
    # RequireAllSignatures
    # This directive controls whether the full 10 signatures will be required in order
    # to turn in a petition. Smaller servers would be better off having it turned off.
    # Default: off
    #
    # ShowGMInWhoList
    # This directive controls whether GM's will be shown in player's who lists or not.
    # Default: on
    #
    # MapUnloadTime
    # This directive controls whether to unload map cells after an idle period of <x> seconds.
    # Use on smaller servers or servers that are memory-limited. The server without cell unloading
    # can use over 1.2GB memory with all creatures loaded.
    # Default: 0
    #
    # LimitedNames
    # This directive forces all character names to be a-z and A-Z compliant.
    # Default: 1
    #
    # UseAccountData
    # This directive determines whether the account_data table is used to save custom client data.
    # May cause buggy behaviour.
    # Default: 0
    #
    # AllowPlayerCommands
    # This directive, if enabled can allow players to use commands with a '0' command group.
    # Default: 0
    #
    # EnableLFGJoin
    # If this is enabled, you can join the LFG channel without using the LFG tool.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Server PlayerLimit = "100"
    Motd = "No MOTD specified."
    SendStatsOnJoin = "1"
    EnableBreathing = "1"
    SeperateChatChannels = "0"
    CompressionThreshold = "1000"
    QueueUpdateInterval = "5000"
    KickAFKPlayers = "0"
    ConnectionTimeout = "180"
    RealmType = "1"
    AdjustPriority = "0"
    RequireAllSignatures = "0"
    ShowGMInWhoList = "1"
    MapUnloadTime="0"
    LimitedNames="1"
    UseAccountData="0"
    AllowPlayerCommands="0"
    EnableLFGJoin="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Announce Configuration
    #
    # Tag
    # Configure what is shown in front of your announces in the [] brackets.
    # Default: Staff (would give [Staff])
    #
    # GMAdminTag
    # Configure whether the <GM> or <Admin> tag is shown in announces.
    # Default: 0 (disabled)
    #
    # NameinAnnounce
    # If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
    # Default: 1 (enabled)
    #
    # NameinWAnnounce
    # If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
    # of the message.
    # Default: 1 (enabled)
    #
    # ShowInConsole
    # This controls whether announces are shown in the arcemu-world console or not.
    # This does not apply for the team-internal GM announce.
    # Default: 1 (enabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Announce Tag = "Staff"
    GMAdminTag = "0"
    NameinAnnounce = "1"
    NameinWAnnounce = "1"
    ShowInConsole = "1">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    # If this triggers it means you didn't read your config file!
    # Just comment it or remove it when you've read this.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    #<die msg="I am a newb who didn't even read half my config file!">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    #
    # These directives set up the multiplier in which regen values will be
    # multiplied by every 2 seconds.
    # Powers:
    # Power1 = Mana, Power2 = Rage, Power3 = Energy
    #
    # Reputation:
    # Kill = Rep gained on kill, Quest = rep gained from quests
    #
    # Honor:
    # Honor = multiplier used to calculate honor per-kill.
    #
    # PvP:
    # PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #
    # XP:
    # The xp that a player receives from killing a creature will be multiplied
    # by this value in order to get his xp gain.
    #
    # RestXP:
    # Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    # Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    # F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of .
    # Note that resting in a resting area (Zzz) goes 4 times faster.
    # Default: 1 (bubble every 8 hrs)
    #
    # Drop(Color):
    # These values will be multiplied by the drop percentages of the items for creatures
    # to determine which items to drop. All default to 1.
    # To allow you better control of drops, separate multipliers have been created for items
    # of each quality group.
    #
    # DropMoney:
    # This value will be multiplied by any gold looted and pickpocketed
    #
    # Save:
    # Value in milliseconds (ms) that will be between player autosaves.
    # Default: 300000 (5 minutes)
    #
    # SkillChance:
    # The chance that you have to level up a skill in melee or a profession is multiplied
    # by this value.
    # Default: 1
    #
    # SkillRate:
    # The amount of "levels" your skill goes up each time you gain a level is multiplied
    # by this value.
    #
    # ArenaMultiplier
    # Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Rates Health="1"
    Power1="1"
    Power2="1"
    Power3="1"
    QuestReputation="1"
    KillReputation="1"
    Honor="1"
    PvPTimer="300000"
    Compression="1"
    XP="1"
    QuestXP="1"
    RestXP="1"
    DropGrey="1"
    DropWhite="1"
    DropGreen="1"
    DropBlue="1"
    DropPurple="1"
    DropOrange="1"
    DropArtifact="1"
    DropMoney="1"
    Save="300000"
    SkillChance="1"
    SkillRate="1"
    ArenaMultiplier2x="1"
    ArenaMultiplier3x="1"
    ArenaMultiplier5x="1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    # This should be set to 'gm_sync_channel' for the My_Master addon to work.
    # Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <GMClient GmClientChannel = "gm_sync_channel">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain & Collision Settings
    #
    # Set the path to the map_xx.bin files and whether unloading should be enabled
    # for the main world maps here. Unloading the main world maps when they go idle
    # can save a great amount of memory if the cells aren't being activated/idled
    # often. Instance/Non-main maps will not be unloaded ever.
    #
    # Default:
    # MapPath = "maps"
    # vMapPath = "vmaps"
    # UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Terrain MapPath = "maps"
    vMapPath = "vmaps"
    UnloadMaps = "1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    #
    # Cheaters:
    # This directive sets up the cheater logging file, if turned on any
    # cheat / packet exploit / speedhack attempts will be logged here.
    #
    # GMCommands:
    # These two directives set up the GM command logging fie. If turned on,
    # most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Log Cheaters="0" GMCommands="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    # These directives control the limits and behaviour of the ingame mail system.
    # All options must have Mail prefixed before them.
    #
    # ReloadDelay
    # Controls the delay at which the database is "refreshed". Use it if you're
    # inserting mail from an external source, such as a web-based interface.
    # 0 turns it off.
    # Default: 0
    #
    # DisablePostageCostsForGM
    # Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    # Default: 1
    #
    # DisablePostageCosts
    # Disables postage costs for all players.
    # Default: 0
    #
    # DisablePostageDelayItems
    # Disables the one hour wait time when sending mail with items attached.
    # Default: 1
    #
    # DisableMessageExpiry
    # Turns off the 30 day / 3 day after read message expiry time.
    # WARNING: A mailbox still cannot show more than 50 items at once
    # (stupid limitation in client).
    # Default: 0
    #
    # EnableInterfactionMail
    # Removes the faction limitation for sending mail messages. Applies to all players.
    # Default: 1
    #
    # EnableInterfactionMailForGM
    # Removes the faction limitation for sending mail messages, but only applies
    # to GM's. EnableInterfactionMail overrides this.
    # Default: 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Mail ReloadDelay="0"
    DisablePostageCostsForGM="1"
    DisablePostageCosts="0"
    DisablePostageDelayItems="1"
    DisableMessageExpiry="0"
    EnableInterfactionMail="1"
    EnableInterfactionMailForGM="1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    # These directives set up the status dumper plugin. Filename is an
    # absolute or relative path to the server binary. Interval is the
    # time that the stats will be dumped to xml.
    # Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <StatDumper FileName = "stats.xml" Interval = "120000">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    # Preloading
    # This directive controls whether the entire world will be spawned at server
    # startup or on demand. It is advised to leave it disabled unless you are a
    # developer doing testing.
    # Default: off
    #
    # Background Loot Loading
    # This directive controls whether loot will be loaded progressively during
    # startup or in the background in a seperate thread. Turning it on will
    # result in much faster startup times.
    # Default: on
    #
    # Multithreaded Startup
    # This controls whether the server will spawn multiple worker threads to
    # use for loading the database and starting the server. Turning it on
    # increases the speed at which it starts up for each additional cpu in your
    # computer.
    # Default: on
    #
    # Additional Table Binding
    # You can load static item/creature/etc data into the server using this directive.
    # This way throughout database updates your custom data can be preserved.
    # Format: "sourcetable destination table,sourcetable destinationtable"
    # Example: "myitems items,mynpcs creature_names"
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Startup Preloading = "0"
    BackgroundLootLoading = "1"
    EnableMultithreadedLoading = "1"
    LoadAdditionalTables="">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    # Lines
    # This is the number of "messages" or lines that it will allow before stopping messages from
    # being sent. This counter is reset every "Seconds" seconds.
    # Default: 0 (disabled)
    #
    # Seconds
    # This is the number of seconds inbetween the Line counter being reset.
    # Default: 0 (disabled)
    #
    # SendMessage
    # If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    # message will be sent upon flood triggering.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    # DisablePings
    # This directive controls whether pings will be sent to the logonserver to check
    # if the connection is still "alive". Expect problems if it is disabled.
    # Default: 0
    #
    # RemotePassword
    # This directive controls the password used to authenticate with the logonserver.
    # It must be the same between the two configs. If it is not, your server will
    # not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogonServer DisablePings = "0"
    RemotePassword = "youtube">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    # Teleport
    # This directive controls anti-teleport hack checks will be enabled or not.
    # Default: 1
    #
    # Speed
    # This directive controls anti-speed hack checks will be performed on player movement or not.
    # Default: 1
    #
    # SpeedThreshold
    # This directive controls the threshold at which the speedhack detection will trip.
    # It's (characters' move time of distance - real move time of distance)
    # Default: -600.0
    #
    # FallDamage
    # This directive controls anti-fall damage hack checks will be performed on player movement or not.
    # Default: 1
    #
    # Flying
    # This directive controls whether flight hacks will be performed on players or not.
    # Default: 1
    #
    # FlightThreshold
    # This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    # Default: 10
    #
    # DisableOnGM
    # This directive controls hack checks will be disabled for GM's or not.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <AntiHack Teleport="1"
    Speed="1"
    FallDamage="1"
    Flight="1"
    FlightThreshold="10"
    DisableOnGM="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    # These are the periods that the server will wait before doing periodic duties. At the moment only
    # arena point calculation and honor point calculation are used here.
    #
    # Default:
    # Arena: weekly
    # Honor: daily
    # (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Periods HonorUpdate="daily"
    ArenaUpdate="weekly"
    DailyUpdate="daily">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    # These directives control some of the aspects in the channel system.
    #
    # BannedChannels
    # If you would like to ban users from creating or joining a channel specify them here in a ';'
    # seperated list.
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Channels BannedChannels="">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    # These directives control some of the aspects in the voice chat system.
    #
    # Enabled
    # If you want to enable the voice chat system, this must be set to 1.
    # Default: "0"
    #
    # ServerIP
    # This is the IP of the voice chat server.
    # Default: "127.0.0.1"
    #
    # ServerPort
    # This is the TCP port of the voice chat server.
    # Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <VoiceChat Enabled="0"
    ServerIP="127.0.0.1"
    ServerPort="3727">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Remote Console Setup
    #
    # These directives control the remote administration console.
    #
    # Enabled
    # If you want to enable the remote administration console, set this.
    # Default: 0
    #
    # Host
    # This is the interface the RA server listens on.
    # Default: "0.0.0.0"
    #
    # Port
    # This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    # Default: 8092
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <RemoteConsole Enabled="0"
    Host="0.0.0.0"
    Port="8092">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Scripting Engine Setup
    #
    # ArcEmu can support multiple script backends via the means of loading .dll files for them.
    # This section in the config can enable/disable those backends.
    #
    # LUA
    # If you would like to enable the LUA scripting backend, enable this.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <ScriptBackends LUA="0"
    AS="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Movement Setup
    #
    # NOTE: For any of these directives to function, movement compression has to be compiled into
    # the server.
    #
    # FlushInterval
    # This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    # If you have a high threshold, keeping this at 1-2 seconds will work better.
    # Default: 1000 (one second)
    #
    # CompressionRate
    # This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    # Range: 1-9 (or 0 is disable)
    # Default: 1
    #
    # CompressionThreshold
    # This is the distance that will be used to determine if an object needs to be sent compressed or
    # normal. It is advised to keep it at least 30 units. This value is used for players.
    # Default: 30.0
    #
    # CompressionThresholdCreatures
    # This is the distance that will be used to determine if an object needs to be sent compressed or
    # normal. This value is used for creatures, so it can be a lot lower.
    # Default: 10.0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Movement FlushInterval="1000"
    CompressRate="1"
    CompressThreshold="30.0"
    CompressThresholdCreatres="10.0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    # You should know what to do here :P
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    #<die2 msg="I read nearly all my config file, but not the whole thing!">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    # LocaleBindings
    # This is a list of locale names and the other locale you want to associate with them.
    # For example, to make the European client always use the french language, "enGB=frFR"
    #
    # Must be terminated by a space.
    #
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Localization LocaleBindings="">
    Last edited by PGzard; 01-21-2009 at 09:40 AM.

  2. #2
    New User
    Reputation
    1
    Join Date
    Jan 2009
    Posts
    3
    CoreCoins
    0

    Trade Feedbacks

    Status
    n/a
    Positive
    0 (0%)
    Negative
    0 (0%)
    How to setup ip in this configs

  3. #3
    Knight

    Reputation
    32
    Join Date
    Nov 2007
    Location
    Sweden
    Posts
    206
    CoreCoins
    0

    Trade Feedbacks

    Status
    n/a
    Positive
    0 (0%)
    Negative
    0 (0%)
    First: Learn to *ucking embed those config files in "CODE".
    Second: Learn to use the SEARCH buttonz, ain't that hard.

    -Babb

  4. #4
    Plq
    Plq is offline
    New User

    Reputation
    2
    Join Date
    Jan 2009
    Posts
    30
    CoreCoins
    0

    Trade Feedbacks

    Status
    n/a
    Positive
    0 (0%)
    Negative
    0 (0%)
    Just change ur realms config to this.
    Code:
    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 336 by Dameon
    #######################################################################
    
    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    # Address:
    # The address (no port) of the server.
    #
    # Port:
    # The port on which the logon server listens. (*** NOT 3724 ***)
    #
    # Name:
    # Not really relavant, but name the logon.
    #
    # RealmCount:
    # The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Logon"
    RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    # Name:
    # The name of the realm.
    #
    # Address:
    # The address (and port) of that realm.
    #
    # Icon:
    # The type of realm (PVP, Normal, RPPVP, RP)
    #
    # TimeZone:
    # Time zone the realm is in.
    #
    # Population:
    # (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "YouTube Server"
    Address = "222.123.14.187:8129"
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "1">

  5. #5
    Banned
    Reputation
    647
    Join Date
    Dec 2006
    Location
    Langemark, Belgium
    Posts
    2,459
    CoreCoins
    0

    Trade Feedbacks

    Status
    n/a
    Positive
    0 (0%)
    Negative
    0 (0%)
    CODE tags pls...and check guides section, it's full of guides for these kind of things

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 11:54 AM. Powered by vBulletin® Version 4.2.0
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Content Relevant URLs by vBSEO Resources saved on this page: MySQL 21.43%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233