Help Me, Plz fix my IP in configs for online menu

User Tag List

Results 1 to 5 of 5
  1. #1
    PGzard's Avatar Member
    Reputation
    1
    Join Date
    Jan 2009
    Posts
    3
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Help Me, Plz fix my IP in configs for online

    I can run sevr offline, but i need set IP for othen player to join in my server

    plz help me to fix 222.123.14.187

    in Configs Serv ArcEmu 2.4.3


    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 425 by neo_mat
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    # LogonDatabase Section
    #
    # These directives are the location of the `realms` and `accounts`
    # tables.
    #
    # LogonDatabase.Host - The hostname that the database is located on
    # LogonDatabase.Username - The username used for the mysql connection
    # LogonDatabase.Password - The password used for the mysql connection
    # LogonDatabase.Name - The database name
    # LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
    # LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #

    <LogonDatabase Hostname = "localhost"
    Username = "root"
    Password = "root"
    Name = "characters"
    Port = "3306"
    Type = "1">


    # Host Directive
    #
    # This is the address that the realmlist will listen on.
    # To listen on all addresses, set it to 0.0.0.0
    # Default: 127.0.0.1 (localhost)
    #
    # Note: ISHost is the interserver communication listener.
    #

    <Listen Host = "0.0.0.0"
    ISHost = "0.0.0.0"
    RealmListPort = "3724"
    ServerPort = "8093">

    # Server console logging level
    #
    # This directive controls how much output the server will
    # display in it's console. Set to 0 for none.
    # 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    # Default: 3
    #

    <LogLevel Screen = "0"
    File = "-1">

    # Account Refresh Time
    #
    # This controls on which time interval accounts gets
    # refreshed. (In seconds)
    # Default = 600
    #

    <Rates AccountRefresh = "600">

    # Accepted Build Range Setup
    #
    # These two directives set up which clients will be
    # allowed to authenticate with the realm list.
    #
    # Set these to the same builds that the server was
    # compiled for.
    #
    # As of the last update, version 2.1.1 was build 6739.
    #

    <Client MinBuild = "8606"
    MaxBuild = "8606">

    # WorldServer Setup
    #
    # RemotePassword
    # This directive controls the password used to authenticate with the worldserver.
    # It must be the same between the two configs. If it is not, your server will
    # not register.
    #
    # Default: "change_me_logon"
    #
    # AllowedIPs
    # This section MUST be completed, otherwise all attempts to link your servers will fail.
    # These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
    # to make server connections to your logonserver, and register realms.
    # For example, everything in the 127.0.0.* range would be:
    # 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
    #
    # To allow a single IP,
    # 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
    #
    # AllowedModIPs
    # In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
    # (adding bans, GMs, account permissions, etc)
    #

    <LogonServer RemotePassword = "youtube"
    AllowedIPs = "127.0.0.1/32"
    AllowedModIPs = "127.0.0.1/32">
    ###########################################################################
    # ArcEmu Optional Configuration File
    # Last Update: $Id: arcemu-optional.conf 309 2008-06-03 14:29:43Z tazjin $
    #
    # This configuration file contains all non-blizzlike values.
    ###########################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Optional Settings
    #
    # Starting Level
    # This controls at which level characters are created. Range is from 1-70.
    # Default: 1
    #
    # Level Cap
    # This variable controls the level that stats will be generated up to internally.
    # Beyond this level players can still see a higher level visually but their stats won't
    # increase beyond this point.
    # Default: 70
    #
    # Generated Level Level Cap
    # This variable controls the level at which stats will generate up to. Generally the formulas go
    # crazy after level 70 so this way you can keep the high visual but stats at a reasonable value.
    # Default: 70
    #
    # Allow The Burning Crusade characters
    # This will override account settings, so you can disable TBC from your server without having to mess with accounts.
    # Default: 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Optional StartingLevel = "1"
    LevelCap = "800"
    GenLevelCap = "800"
    AllowTBC = "1"
    AntiMasterLootNinja = "0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Interfaction Options
    #
    # InterfactionChat
    # This directive controls whether horde and alliance players can talk to each other.
    # Default: 0 (disabled)
    #
    # InterfactionGroup
    # This directive controls whether horde and alliance players are able to build a group together.
    # Default: 0 (disabled)
    #
    # InterfactionGuild
    # This directive controls whether horde and alliance players are able to build crossfaction guilds
    # Default: 0 (disabled)
    #
    # InterfactionTrade
    # This directive controls whether horde and alliance players can trade with each other.
    # Default: 0 (disabled)
    #
    # InterfactionFriends
    # If this is enabled players can add other players from the opposite faction to their friends list
    # Default: 0 (disabled)
    #
    # InterfactionMisc
    # This directive controls whether horde and alliance players are able to use different functions
    # on players of the opposite faction. This includes e.g. using the /who command.
    # Default: 0 (disabled)
    #
    # CrossOverCharacters
    # If this is enabled players are able to create both, horde and alliance characters on a PVP realm.
    # Default: 0 (disabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Interfaction InterfactionChat="0"
    InterfactionGroup="0"
    InterfactionGuild="0"
    InterfactionTrade="0"
    InterfactionFriends="0"
    InterfactionMisc="0"
    CrossOverCharacters="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Color Configuration
    # Announce
    # AnnTagColor
    # This controls which color the [] tag in front of announces has.
    # Default: 2 (Light Blue)
    #
    # AnnGMTagColor
    # This controls the color of the GM/Admin tag in announces. Only enabled if GMAdminTag is set to 1.
    # Default: 1 (Light red)
    #
    # AnnNameColor
    # This controls the color of the gamemaster's name in announces.
    # Default: 4 (Green)
    #
    # AnnMsgColor
    # This controls the color of message in announces.
    # Default: 6 (Gold)
    #
    #
    # You can choose one of the colors below.
    # LightRed = 1
    # LightBlue = 2
    # Blue = 3
    # Green = 4
    # Red = 5
    # Gold = 6
    # Grey = 7
    # White = 8
    # Magenta = 9
    # Yellow = 10
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Color AnnTagColor = "2"
    AnnGMTagColor = "1"
    AnnNameColor = "4"
    AnnMsgColor = "6">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Extra Scripts Configuration
    #
    # Instant70
    # Enables Instant70 mode.
    #
    # PvPToken
    # This directive enables item rewards when there is a PvP Kill and players are level 70
    #
    # PvPTokenID
    # If PvPToken is enabled, specify the item ID of your custom Token ID, or any other item
    #
    # L70etc
    # Enables L70etc Band Gossip script.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Extra Instant70="0" PvPToken="0" PvPTokenID="13905" PvPKillAnnounce="0" Portals="0" L70etc="0" WeddingNPC="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GameMaster Configuration
    #
    # ListOnlyActiveGMs
    # List only gamemasters with enabled GMFlag to players without any permissions.
    #
    # HidePermissions
    # Hides permission flags from players without any permissions.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <GameMaster ListOnlyActiveGMs = "0"
    HidePermissions = "0">

    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 336 by Dameon
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    # Address:
    # The address (no port) of the server.
    #
    # Port:
    # The port on which the logon server listens. (*** NOT 3724 ***)
    #
    # Name:
    # Not really relavant, but name the logon.
    #
    # RealmCount:
    # The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Logon"
    RealmCount = "1">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    # Name:
    # The name of the realm.
    #
    # Address:
    # The address (and port) of that realm.
    #
    # Icon:
    # The type of realm (PVP, Normal, RPPVP, RP)
    #
    # TimeZone:
    # Time zone the realm is in.
    #
    # Population:
    # (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Realm1 Name = "YouTube Server"
    Address = "127.0.0.1:8129"
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "1">



    #######################################################################
    # ArcEmu Configuration File
    # Last Update: $Id: arcemu-world.conf 336 by Dameon $
    #######################################################################

    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    # Database.Host - The hostname that the database is located on
    # Database.Username - The username used for the mysql connection
    # Database.Password - The password used for the mysql connection
    # Database.Name - The database name
    # Database.Port - Port that MySQL listens on. Usually 3306.
    # Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <WorldDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "arcemu" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "characters" Port = "3306" Type = "1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    # Host
    # This is the address that the server will listen on.
    # To listen on all addresses, set it to 0.0.0.0
    # Default: 127.0.0.1 (localhost)
    #
    # WorldServerPort
    # This is the port that the world server listens on.
    # It has to be the same as what is specified in the
    # realms table in the LogonDatabase.
    # Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Listen Host = "0.0.0.0"
    WorldServerPort = "8129">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    # Console Logging Level
    # This directive controls how much output the server will
    # display in it's console. Set to 0 for none, or -1 to disable.
    # -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    # Default: 3
    #
    # World server packet logging feature
    # If this directive is turned on, a file called `world.log`
    # will be created in the server's directory and all packets
    # sent and received by clients will be dumped here in bfg
    # format.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogLevel Screen="0" File="-1" World="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Server Settings
    #
    # PlayerLimit
    # This directive controls the amount of sessions that will be
    # accepted by the server before it starts to add people to
    # the server queue.
    # Default: 100
    #
    # Motd
    # This message will be displayed by the server in the chat
    # box every time any user logs on. Colors can be used in the
    # standard WoW format.
    # Default: "No MOTD specified
    #
    # Send Stats On Join
    # This directive controls whether the server will send the online player
    # count to a cilent when it enters the world.
    #
    # Breathing Setup
    # If the breathing code is causing problems or you want to run a fun server, you can disable
    # water checks by enabling this directive.
    # Default: 1
    #
    # Seperate Channels Control
    # This directive controls whether horde and alliance chats will be seperated across channels.
    # Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    # across channels.
    # Default: 0
    #
    # Compression Threshold
    # This directive controls the limit when update packets will be compressed using deflate.
    # For lower-bandwidth servers use a lower value at the cost of cpu time.
    # Default: 1000
    #
    # Queue Update Rate
    # This directive controls how many milliseconds (ms) between the updates
    # that the queued players receieve telling them their position in the queue.
    # Default: 5000 (5 seconds).
    #
    # Kick AFK Players
    # Time in milliseconds (ms) that a player will be kicked after they go afk.
    # Default: 0 (disabled)
    #
    # Connection Timeout
    # This directive specifies the amount of seconds that the client will be disconnected
    # after if no ping packet is sent. It is advised to leave it at the default.
    # Default: 180
    #
    # Realm Type
    # This is the realm type that will be used by the server to handle world pvp.
    # Default: 0 (pve)(RPPVE)
    # Other values: 1(pvp)(RPPVP)
    #
    # AdjustPriority
    # Set the server to high process priority?
    # Default: 0
    #
    # RequireAllSignatures
    # This directive controls whether the full 10 signatures will be required in order
    # to turn in a petition. Smaller servers would be better off having it turned off.
    # Default: off
    #
    # ShowGMInWhoList
    # This directive controls whether GM's will be shown in player's who lists or not.
    # Default: on
    #
    # MapUnloadTime
    # This directive controls whether to unload map cells after an idle period of <x> seconds.
    # Use on smaller servers or servers that are memory-limited. The server without cell unloading
    # can use over 1.2GB memory with all creatures loaded.
    # Default: 0
    #
    # LimitedNames
    # This directive forces all character names to be a-z and A-Z compliant.
    # Default: 1
    #
    # UseAccountData
    # This directive determines whether the account_data table is used to save custom client data.
    # May cause buggy behaviour.
    # Default: 0
    #
    # AllowPlayerCommands
    # This directive, if enabled can allow players to use commands with a '0' command group.
    # Default: 0
    #
    # EnableLFGJoin
    # If this is enabled, you can join the LFG channel without using the LFG tool.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Server PlayerLimit = "100"
    Motd = "No MOTD specified."
    SendStatsOnJoin = "1"
    EnableBreathing = "1"
    SeperateChatChannels = "0"
    CompressionThreshold = "1000"
    QueueUpdateInterval = "5000"
    KickAFKPlayers = "0"
    ConnectionTimeout = "180"
    RealmType = "1"
    AdjustPriority = "0"
    RequireAllSignatures = "0"
    ShowGMInWhoList = "1"
    MapUnloadTime="0"
    LimitedNames="1"
    UseAccountData="0"
    AllowPlayerCommands="0"
    EnableLFGJoin="0">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Announce Configuration
    #
    # Tag
    # Configure what is shown in front of your announces in the [] brackets.
    # Default: Staff (would give [Staff])
    #
    # GMAdminTag
    # Configure whether the <GM> or <Admin> tag is shown in announces.
    # Default: 0 (disabled)
    #
    # NameinAnnounce
    # If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
    # Default: 1 (enabled)
    #
    # NameinWAnnounce
    # If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
    # of the message.
    # Default: 1 (enabled)
    #
    # ShowInConsole
    # This controls whether announces are shown in the arcemu-world console or not.
    # This does not apply for the team-internal GM announce.
    # Default: 1 (enabled)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    <Announce Tag = "Staff"
    GMAdminTag = "0"
    NameinAnnounce = "1"
    NameinWAnnounce = "1"
    ShowInConsole = "1">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    # If this triggers it means you didn't read your config file!
    # Just comment it or remove it when you've read this.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    #<die msg="I am a newb who didn't even read half my config file!">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    #
    # These directives set up the multiplier in which regen values will be
    # multiplied by every 2 seconds.
    # Powers:
    # Power1 = Mana, Power2 = Rage, Power3 = Energy
    #
    # Reputation:
    # Kill = Rep gained on kill, Quest = rep gained from quests
    #
    # Honor:
    # Honor = multiplier used to calculate honor per-kill.
    #
    # PvP:
    # PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #
    # XP:
    # The xp that a player receives from killing a creature will be multiplied
    # by this value in order to get his xp gain.
    #
    # RestXP:
    # Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    # Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    # F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of .
    # Note that resting in a resting area (Zzz) goes 4 times faster.
    # Default: 1 (bubble every 8 hrs)
    #
    # Drop(Color):
    # These values will be multiplied by the drop percentages of the items for creatures
    # to determine which items to drop. All default to 1.
    # To allow you better control of drops, separate multipliers have been created for items
    # of each quality group.
    #
    # DropMoney:
    # This value will be multiplied by any gold looted and pickpocketed
    #
    # Save:
    # Value in milliseconds (ms) that will be between player autosaves.
    # Default: 300000 (5 minutes)
    #
    # SkillChance:
    # The chance that you have to level up a skill in melee or a profession is multiplied
    # by this value.
    # Default: 1
    #
    # SkillRate:
    # The amount of "levels" your skill goes up each time you gain a level is multiplied
    # by this value.
    #
    # ArenaMultiplier
    # Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Rates Health="1"
    Power1="1"
    Power2="1"
    Power3="1"
    QuestReputation="1"
    KillReputation="1"
    Honor="1"
    PvPTimer="300000"
    Compression="1"
    XP="1"
    QuestXP="1"
    RestXP="1"
    DropGrey="1"
    DropWhite="1"
    DropGreen="1"
    DropBlue="1"
    DropPurple="1"
    DropOrange="1"
    DropArtifact="1"
    DropMoney="1"
    Save="300000"
    SkillChance="1"
    SkillRate="1"
    ArenaMultiplier2x="1"
    ArenaMultiplier3x="1"
    ArenaMultiplier5x="1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    # This should be set to 'gm_sync_channel' for the My_Master addon to work.
    # Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <GMClient GmClientChannel = "gm_sync_channel">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain & Collision Settings
    #
    # Set the path to the map_xx.bin files and whether unloading should be enabled
    # for the main world maps here. Unloading the main world maps when they go idle
    # can save a great amount of memory if the cells aren't being activated/idled
    # often. Instance/Non-main maps will not be unloaded ever.
    #
    # Default:
    # MapPath = "maps"
    # vMapPath = "vmaps"
    # UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Terrain MapPath = "maps"
    vMapPath = "vmaps"
    UnloadMaps = "1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    #
    # Cheaters:
    # This directive sets up the cheater logging file, if turned on any
    # cheat / packet exploit / speedhack attempts will be logged here.
    #
    # GMCommands:
    # These two directives set up the GM command logging fie. If turned on,
    # most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Log Cheaters="0" GMCommands="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    # These directives control the limits and behaviour of the ingame mail system.
    # All options must have Mail prefixed before them.
    #
    # ReloadDelay
    # Controls the delay at which the database is "refreshed". Use it if you're
    # inserting mail from an external source, such as a web-based interface.
    # 0 turns it off.
    # Default: 0
    #
    # DisablePostageCostsForGM
    # Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    # Default: 1
    #
    # DisablePostageCosts
    # Disables postage costs for all players.
    # Default: 0
    #
    # DisablePostageDelayItems
    # Disables the one hour wait time when sending mail with items attached.
    # Default: 1
    #
    # DisableMessageExpiry
    # Turns off the 30 day / 3 day after read message expiry time.
    # WARNING: A mailbox still cannot show more than 50 items at once
    # (stupid limitation in client).
    # Default: 0
    #
    # EnableInterfactionMail
    # Removes the faction limitation for sending mail messages. Applies to all players.
    # Default: 1
    #
    # EnableInterfactionMailForGM
    # Removes the faction limitation for sending mail messages, but only applies
    # to GM's. EnableInterfactionMail overrides this.
    # Default: 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Mail ReloadDelay="0"
    DisablePostageCostsForGM="1"
    DisablePostageCosts="0"
    DisablePostageDelayItems="1"
    DisableMessageExpiry="0"
    EnableInterfactionMail="1"
    EnableInterfactionMailForGM="1">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    # These directives set up the status dumper plugin. Filename is an
    # absolute or relative path to the server binary. Interval is the
    # time that the stats will be dumped to xml.
    # Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <StatDumper FileName = "stats.xml" Interval = "120000">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    # Preloading
    # This directive controls whether the entire world will be spawned at server
    # startup or on demand. It is advised to leave it disabled unless you are a
    # developer doing testing.
    # Default: off
    #
    # Background Loot Loading
    # This directive controls whether loot will be loaded progressively during
    # startup or in the background in a seperate thread. Turning it on will
    # result in much faster startup times.
    # Default: on
    #
    # Multithreaded Startup
    # This controls whether the server will spawn multiple worker threads to
    # use for loading the database and starting the server. Turning it on
    # increases the speed at which it starts up for each additional cpu in your
    # computer.
    # Default: on
    #
    # Additional Table Binding
    # You can load static item/creature/etc data into the server using this directive.
    # This way throughout database updates your custom data can be preserved.
    # Format: "sourcetable destination table,sourcetable destinationtable"
    # Example: "myitems items,mynpcs creature_names"
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Startup Preloading = "0"
    BackgroundLootLoading = "1"
    EnableMultithreadedLoading = "1"
    LoadAdditionalTables="">

    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    # Lines
    # This is the number of "messages" or lines that it will allow before stopping messages from
    # being sent. This counter is reset every "Seconds" seconds.
    # Default: 0 (disabled)
    #
    # Seconds
    # This is the number of seconds inbetween the Line counter being reset.
    # Default: 0 (disabled)
    #
    # SendMessage
    # If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    # message will be sent upon flood triggering.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    # DisablePings
    # This directive controls whether pings will be sent to the logonserver to check
    # if the connection is still "alive". Expect problems if it is disabled.
    # Default: 0
    #
    # RemotePassword
    # This directive controls the password used to authenticate with the logonserver.
    # It must be the same between the two configs. If it is not, your server will
    # not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <LogonServer DisablePings = "0"
    RemotePassword = "youtube">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    # Teleport
    # This directive controls anti-teleport hack checks will be enabled or not.
    # Default: 1
    #
    # Speed
    # This directive controls anti-speed hack checks will be performed on player movement or not.
    # Default: 1
    #
    # SpeedThreshold
    # This directive controls the threshold at which the speedhack detection will trip.
    # It's (characters' move time of distance - real move time of distance)
    # Default: -600.0
    #
    # FallDamage
    # This directive controls anti-fall damage hack checks will be performed on player movement or not.
    # Default: 1
    #
    # Flying
    # This directive controls whether flight hacks will be performed on players or not.
    # Default: 1
    #
    # FlightThreshold
    # This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    # Default: 10
    #
    # DisableOnGM
    # This directive controls hack checks will be disabled for GM's or not.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <AntiHack Teleport="1"
    Speed="1"
    FallDamage="1"
    Flight="1"
    FlightThreshold="10"
    DisableOnGM="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    # These are the periods that the server will wait before doing periodic duties. At the moment only
    # arena point calculation and honor point calculation are used here.
    #
    # Default:
    # Arena: weekly
    # Honor: daily
    # (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Periods HonorUpdate="daily"
    ArenaUpdate="weekly"
    DailyUpdate="daily">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    # These directives control some of the aspects in the channel system.
    #
    # BannedChannels
    # If you would like to ban users from creating or joining a channel specify them here in a ';'
    # seperated list.
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Channels BannedChannels="">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    # These directives control some of the aspects in the voice chat system.
    #
    # Enabled
    # If you want to enable the voice chat system, this must be set to 1.
    # Default: "0"
    #
    # ServerIP
    # This is the IP of the voice chat server.
    # Default: "127.0.0.1"
    #
    # ServerPort
    # This is the TCP port of the voice chat server.
    # Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <VoiceChat Enabled="0"
    ServerIP="127.0.0.1"
    ServerPort="3727">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Remote Console Setup
    #
    # These directives control the remote administration console.
    #
    # Enabled
    # If you want to enable the remote administration console, set this.
    # Default: 0
    #
    # Host
    # This is the interface the RA server listens on.
    # Default: "0.0.0.0"
    #
    # Port
    # This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    # Default: 8092
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <RemoteConsole Enabled="0"
    Host="0.0.0.0"
    Port="8092">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Scripting Engine Setup
    #
    # ArcEmu can support multiple script backends via the means of loading .dll files for them.
    # This section in the config can enable/disable those backends.
    #
    # LUA
    # If you would like to enable the LUA scripting backend, enable this.
    # Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <ScriptBackends LUA="0"
    AS="0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Movement Setup
    #
    # NOTE: For any of these directives to function, movement compression has to be compiled into
    # the server.
    #
    # FlushInterval
    # This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    # If you have a high threshold, keeping this at 1-2 seconds will work better.
    # Default: 1000 (one second)
    #
    # CompressionRate
    # This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    # Range: 1-9 (or 0 is disable)
    # Default: 1
    #
    # CompressionThreshold
    # This is the distance that will be used to determine if an object needs to be sent compressed or
    # normal. It is advised to keep it at least 30 units. This value is used for players.
    # Default: 30.0
    #
    # CompressionThresholdCreatures
    # This is the distance that will be used to determine if an object needs to be sent compressed or
    # normal. This value is used for creatures, so it can be a lot lower.
    # Default: 10.0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Movement FlushInterval="1000"
    CompressRate="1"
    CompressThreshold="30.0"
    CompressThresholdCreatres="10.0">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    # You should know what to do here :P
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    #<die2 msg="I read nearly all my config file, but not the whole thing!">


    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    # LocaleBindings
    # This is a list of locale names and the other locale you want to associate with them.
    # For example, to make the European client always use the french language, "enGB=frFR"
    #
    # Must be terminated by a space.
    #
    # Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

    <Localization LocaleBindings="">
    Last edited by PGzard; 01-21-2009 at 09:40 AM.

    Help Me, Plz fix my IP in configs for online
  2. #2
    PGzard's Avatar Member
    Reputation
    1
    Join Date
    Jan 2009
    Posts
    3
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    How to setup ip in this configs

  3. #3
    Babbaa's Avatar Member
    Reputation
    32
    Join Date
    Nov 2007
    Posts
    206
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    First: Learn to *ucking embed those config files in "CODE".
    Second: Learn to use the SEARCH buttonz, ain't that hard.

    -Babb

  4. #4
    Plq's Avatar Member
    Reputation
    2
    Join Date
    Jan 2009
    Posts
    30
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Just change ur realms config to this.
    Code:
    #######################################################################
    # ArcEmu Realms Configuration File
    # Last updated at revision 336 by Dameon
    #######################################################################
    
    /********************************************************************************
    * How to use this config file: *
    * Config files are in a block->variable->setting format. *
    * A < signifies the opening of a block, the block name is expected after that. *
    * After the block name, a space and then the settings sperated by = / ' '. *
    * *
    * e.g. *
    * <block setting="0" someval = "1"> *
    * *
    * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
    * of the line, or in shell format (#). *
    ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    # Address:
    # The address (no port) of the server.
    #
    # Port:
    # The port on which the logon server listens. (*** NOT 3724 ***)
    #
    # Name:
    # Not really relavant, but name the logon.
    #
    # RealmCount:
    # The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Logon"
    RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    # Name:
    # The name of the realm.
    #
    # Address:
    # The address (and port) of that realm.
    #
    # Icon:
    # The type of realm (PVP, Normal, RPPVP, RP)
    #
    # TimeZone:
    # Time zone the realm is in.
    #
    # Population:
    # (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "YouTube Server"
    Address = "222.123.14.187:8129"
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "1">

  5. #5
    latruwski's Avatar Banned
    Reputation
    647
    Join Date
    Dec 2006
    Posts
    2,456
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    CODE tags pls...and check guides section, it's full of guides for these kind of things

Similar Threads

  1. Making a Website Help ME plz
    By dubois1 in forum Community Chat
    Replies: 4
    Last Post: 09-07-2007, 05:19 PM
  2. Help me plz
    By galcybele in forum Art & Graphic Design
    Replies: 4
    Last Post: 09-05-2007, 10:02 PM
  3. Help me plz
    By kikoolol in forum WoW ME Questions and Requests
    Replies: 2
    Last Post: 06-06-2007, 09:20 PM
  4. Model editing help needed plz!
    By Lexan in forum World of Warcraft General
    Replies: 0
    Last Post: 02-24-2007, 05:49 AM
All times are GMT -5. The time now is 05:16 AM. Powered by vBulletin® Version 4.2.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved. User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search