World of Warcraft Fish Bot for 1.10 menu

User Tag List

Page 1 of 3 123 LastLast
Results 1 to 15 of 33
  1. #1
    Matt's Avatar Legendary Authenticator enabled
    Reputation
    633
    Join Date
    Feb 2006
    Posts
    2,996
    Thanks G/R
    2/20
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    World of Warcraft Fish Bot for 1.10

    Download here: Attachment 22

    Other than that, what does help is to set all graphics to the worst possible settings (everything off). This gets rid of problems like hightlight confusions.

    And, inside your WTF folder is a file called "Config.wtf".
    Make a copy of that file and then change all your settings to off and 800x600. Then make another copy.

    You end up with 3 config files:
    Config.wtf (the one used)
    FISHING_config.wtf
    NORMAL_config.wtf

    when you need to switch back and forth, while in game, deleted the "config.wtf" file, copy one of the other two and rename the copy "config.wtf"
    Then do a UI restart.

    It's a lot eaiser than reselecting all the graphics options......

    '=================================

    Refering to my ealier post a few pages back, for this or any other fishing bot to work you will need to take screenshots and use the AutoIT window info program on the screenshots to find good colors.

    Once you do that you can start to compile lists: (ex)
    STV DAY: 0xFFFFFF
    STV NIGHT: 0xFFFFFF
    STV DUSK: 0xFFFFFFF

    '==========================================

    And, depending on the zone your in it can be better to get and use the blue feather color......


    '==========================================


    The only way this Macro could be better is if on a failed bobber find post cast it would try a scan on a couple more colors

    If you can't get any of that to work, you can use this alternative compiled source bot: Attachment 39
    Last edited by Matt; 05-09-2006 at 06:18 AM.

    World of Warcraft Fish Bot for 1.10
  2. #2
    Operaman's Avatar Member
    Reputation
    1
    Join Date
    Apr 2006
    Posts
    1
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    How do I make all my settings 0? I understand how to lower the resolution

  3. #3
    zitronenbaum's Avatar Member
    Reputation
    4
    Join Date
    May 2006
    Posts
    67
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Does this fish bot work? And: Does Warden detect this bot?

  4. #4
    Matt's Avatar Legendary Authenticator enabled
    Reputation
    633
    Join Date
    Feb 2006
    Posts
    2,996
    Thanks G/R
    2/20
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    no.
    warden will not detect this bot.
    yes it works.

  5. #5
    zitronenbaum's Avatar Member
    Reputation
    4
    Join Date
    May 2006
    Posts
    67
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks for your reply Matt.

    I tried this bot, but had problems. Followed your instructions, but couldn't get the bot working correctly. I think I don't have the correct settings, that the bot has itself.

  6. #6
    DaUberBird's Avatar Active Member
    Reputation
    15
    Join Date
    Apr 2006
    Posts
    23
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The other bot still seems to work I thought... O.o?

  7. #7
    zitronenbaum's Avatar Member
    Reputation
    4
    Join Date
    May 2006
    Posts
    67
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    What other fish-bot to you mean?

  8. #8
    DaUberBird's Avatar Active Member
    Reputation
    15
    Join Date
    Apr 2006
    Posts
    23
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    http://www.mmowned.com/forums/bots-p...-bot-auto.html
    I mean that bot. It works for me O.o, although it is kind of buggy, so i changed some stuff for myself so it would work in wailing caverns :-P

  9. #9
    Leprechaun78's Avatar Member
    Reputation
    1
    Join Date
    May 2006
    Posts
    2
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    can someone walk me through this darn thing i couldnt figure it out if my life depended on it

  10. #10
    oninuva's Avatar Knight-Lieutenant
    Reputation
    217
    Join Date
    Apr 2006
    Posts
    236
    Thanks G/R
    1/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    hmm this is what u do..

    buy a fishing rod 10c

    then go to a low level water area... Dun Morgh Lakes, Stormwind Canal

    then put the skill on and when the bobber moves up and down right click it. Ta Da!
    dont forget to erm give rep to ppl...

    its important

    I wanna be a mod... so badley.... its not even funny.... lol


  11. #11
    Leprechaun78's Avatar Member
    Reputation
    1
    Join Date
    May 2006
    Posts
    2
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    i mean the fishing bot smartass

  12. #12
    LightWave's Avatar Contributor
    Reputation
    202
    Join Date
    May 2006
    Posts
    410
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    man this is my first time trying to use a bot for wow how in the hell do u set it up im a noob to wow bots

  13. #13
    Cypher's Avatar Kynox's Sister's Pimp
    Reputation
    1356
    Join Date
    Apr 2006
    Posts
    5,368
    Thanks G/R
    0/4
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    We need someone to write a guide with screens on how to use this kind of stuff. I might after my exams and once I get WoW back on. I'll see how I feel in about a week.

  14. #14
    KuRIoS's Avatar Admin
    Authenticator enabled
    Reputation
    2982
    Join Date
    Apr 2006
    Posts
    9,804
    Thanks G/R
    349/296
    Trade Feedback
    9 (100%)
    Mentioned
    3 Post(s)
    Tagged
    1 Thread(s)
    It is pretty darn simple to use an auto-it fishing bot tbh. download autoit and u can compile a source from various places,im sure that if u ask in here someone is willing to give you the code for a bot as well...

    what i did (30 secs after i downloaded auto-it ) was to compile someones code,changed the screen name of the item for like winamp or svchost or sumfin.

    read the instructions on the page where i found the code, found a neet little undisturbed place to fish and launched the bot. fished for 4 hrs while i was in bed because of a terrible hangover and earned 1½ stack of stonescale eels. 40g .

    ANYWAYS... HERE IS THE CODE THAT I SIMPLY COPY + PASTED INTO AUTO-IT
    remember wow must be in 800x600 and in a windowed mode to use this. if u want to keep it in other resolutions i suggest u take a look at the code itself and try changing some stuff in it... of course using this is on ur own risk, all i know is that it works for me =)


    ;#########################################################################
    ; FishBOT by Yorkfire taken from Psycosis, Foobie and Pantless Krab's
    ; original version.
    ;
    ; Version 1.0 beta
    ;
    ; Note - By using the Fishing bot designed for World of Warcraft
    ; You understand the risks and agree that you will take all
    ; responsibility for this code. The creater takes no responsibility
    ; for whatever happens to users who use and/or modify this code
    ;#########################################################################


    ;#######################################
    ; Values read from the Settings.ini file
    ;#######################################
    $HotKey = IniRead ("Settings.ini", "HotKey", "HotKey", "1")
    $CatchAmount = IniRead ("Settings.ini", "CatchAmount", "CatchAmount", "50")
    $splash_tolerance = IniRead ("Settings.ini", "Splash", "SplashTolerance", "20")
    $splash_search_step = IniRead ("Settings.ini", "Splash", "SplashSearchStep", "1")
    $bobber_search_tolerance = IniRead ("Settings.ini", "Bobber","BobberSearchTolerance", "20")
    $bobber_search_step = IniRead ("Settings.ini", "Bobber","BobberSearchStep", "2")
    $color_choice = IniRead ("Settings.ini", "colorchoice", "colorchoice", "3")

    ; Color Definitions
    $1 = IniRead ("Settings.ini", "Color", "1", "0xA72C0B")
    $2 = IniRead ("Settings.ini", "Color", "2", "0xA72C0B")
    $3 = IniRead ("Settings.ini", "Color", "3", "0xA72C0B")
    $4 = IniRead ("Settings.ini", "Color", "4", "0xA72C0B")
    $5 = IniRead ("Settings.ini", "Color", "5", "0xA72C0B")
    $6 = IniRead ("Settings.ini", "Color", "6", "0xA72C0B")
    $7 = IniRead ("Settings.ini", "Color", "7", "0xA72C0B")
    $8 = IniRead ("Settings.ini", "Color", "8", "0xA72C0B")
    $9 = IniRead ("Settings.ini", "Color", "9", "0xA72C0B")
    $10 = IniRead ("Settings.ini", "Color", "10", "0xA72C0B")
    $11 = IniRead ("Settings.ini", "Color", "11", "0xA72C0B")
    $12 = IniRead ("Settings.ini", "Color", "12", "0xA72C0B")
    $13 = IniRead ("Settings.ini", "Color", "13", "0xA72C0B")
    $14 = IniRead ("Settings.ini", "Color", "14", "0xA72C0B")
    $15 = IniRead ("Settings.ini", "Color", "15", "0xA72C0B")


    ;###########
    ; Globals
    ;###########
    $title = "lajdslkfbalskjdlfkjlckvjlkwe"
    $win_title = "World of Warcraft"

    ; Sets up the Borders to fish in
    $top_border_height = 23
    $left_border_width = 4

    ; Sets up the Screen resolution $ make sure its in windowed mode
    $screen_width = 800
    $screen_height = 600

    ; Just a simple Timer
    $time_to_wait = Random(30000, 35000, 1)

    dim $start_time
    dim $color_to_use
    dim $catch_counter = 0
    dim $CastAmt = 0
    dim $BobberAmt = 0
    dim $SplashAmt = 0

    ;#########################################################################
    ; Hot Keys Section
    ;
    ; Set up a Hot key to be used later to end the script
    ;#########################################################################

    HotKeySet("{PAUSE}", "request_end")

    ;#########################################################################
    ; Fish Bot View Paremeters
    ;
    ; Sets up the boundaries of the fishbot on the screen and returns
    ; some visual confirmation by moving the mouse in a square showing
    ; where the bot will be searching for the fishing bobber
    ;#########################################################################

    if not WinExists($win_title, "") then
    msg($win_title & " window must be open.")
    Exit
    endif

    WinActivate($win_title, "")
    WinSetOnTop($win_title, "", 0)
    Sleep(500)

    check_window()

    $win_pos = WinGetPos($win_title, "")
    $win_x = $win_pos[0] + $left_border_width
    $win_y = $win_pos[1] + $top_border_height

    $top = $win_y + (.25 * $screen_height)
    $bottom = $top + (.35 * $screen_height) - 1
    $left = $win_x + (.15 * $screen_width)
    $right = $left + $screen_width - (.15 * 2.0 * $screen_width) - 1

    Start_Bot()


    ;###########################
    ; Visual confirmation
    ; Area scanned for bobber
    ;###########################

    MouseMove($left, $top, 0)
    MouseMove($right, $top, 5)
    MouseMove($right, $bottom, 5)
    MouseMove($left, $bottom, 5)
    MouseMove($left, $top, 5)

    cast_pole()
    find_float()

    ;#########################################################################
    ;
    ; Function find_float
    ;
    ; Once bobber has been cast the bobber needs to be found via colors
    ; The most prominent color is the red so by default that is enabled
    ; More colors have been defined and you may switch them if you want
    ; The only reason to switch them is when fishing in Stormwind or at
    ; night when colors are all very diffrent.
    ;#########################################################################

    func find_float()

    ;##################################################################
    ; This is the search tolerance. In areas where the bobber
    ; colors really stand out, you can use a fairly high threshold.
    ; In areas where the bobber colors are fairly muted in with
    ; the background, you will have to lower the values considerably.
    ;##################################################################

    $bobber_search_tolerance = IniRead ("Settings.ini", "Bobber", "BobberSearchTolerance", "20")

    ;########################################################################
    ; It's better to use lower values here in favor of accurate searching.
    ; This will take more time for it to detect the bobber, but usually
    ; the splash doesn't occur until at least 30% of the time has run out,
    ; and by that time, it should have detected the bobber (assuming the
    ; color values and tolerance are correct).
    ;########################################################################

    $bobber_search_step = IniRead ("Settings.ini", "Bobber", "BobberSearchStep", "2")

    ;#########################################################################
    ; Search for float. In certain lighting, the part of the float may look
    ; more purple than blue. In this case, using $color_red tends to work
    ; the best with a tolerance of 20.
    ;#########################################################################
    choose_color()
    $var = 0
    while 1
    if TimerDiff($start_time) >= $time_to_wait then
    cast_pole()
    endif
    $var = $var + 1
    IniWrite("Settings.ini", "BobberSearch", "BobberSearch", " " & $var)
    $pos = PixelSearch($left, $top, $right, $bottom, $color_to_use, $bobber_search_tolerance, $bobber_search_step)
    if @error then
    SetError(0)
    else
    MouseMove($pos[0], $pos[1], 2)
    $BobberAmt = $BobberAmt + 1
    $BobberSuccessRate = ($BobberAmt/$CastAmt)
    $BobberSuccessRate = Round($BobberSuccessRate * 100, 2)
    IniWrite("Settings.ini", "BobberSuccessRate", "BobberSuccessRate", " " & $BobberSuccessRate & "%")
    find_splash($pos[0], $pos[1] )
    endif
    Sleep(10)
    wend
    endfunc

    ; ############################################################################
    func find_splash($float_x, $float_y)
    $search_left = $float_x - 42
    $search_right = $search_left + 62
    $search_top = $float_y - 42
    $search_bottom = $search_top + 74

    ; Usually you do not have to modify the search color for the splash, as the pixels
    ; have a very distinctive, bright color.
    $splash_color = 0xF5F5F5

    ; Sometimes 30 tolerance works well, sometimes 20 is better in lit areas to avoid catching highlights
    ; in other things.
    $splash_tolerance = IniRead ("Settings.ini", "Splash", "SplashTolerance", "20")

    ; The search step can be pretty small here (1 to 3) without worries because the search area is
    ; so small once it has been narrowed down - speed isn't much of an issue.
    $splash_search_step = IniRead ("Settings.ini", "Splash", "SplashSearchStep", "1")

    $var = 0
    ; Search for splash
    while TimerDiff($start_time) < $time_to_wait
    $var = $var + 1
    IniWrite("Settings.ini", "SplashSearch", "SplashSearch", " " & $var)
    $pos = PixelSearch($search_left, $search_top, $search_right, $search_bottom, $splash_color, $splash_tolerance, $splash_search_step)
    if @error then
    SetError(0)
    else
    $SplashAmt = $SplashAmt + 1
    $SplashSuccessRate = ($SplashAmt/$BobberAmt)
    $SplashSuccessRate = Round($SplashSuccessRate * 100, 2)
    IniWrite("Settings.ini", "SplashSuccessRate", "SplashSuccessRate", " " & $SplashSuccessRate & "%")
    ; Click on the splash
    $RandomClick = Random(800, 3000, 1)
    send("{SHIFTDOWN}")
    MouseClick("right");, $pos[0], $pos[1], 1, 2)
    Sleep($RandomClick)
    send("{ShiftUP}")
    Sleep(5500)
    $catch_counter = $catch_counter + 1
    if $catch_counter = $catchamount then
    $SessionSuccessRate = ($SplashAmt/$CastAmt)
    $SessionSuccessRate = Round($SessionSuccessRate * 100, 2)
    IniWrite("Settings.ini", "SessionSuccessRate", "SessionSuccessRate", " " & $SessionSuccessRate & "%")
    Send("{Esc}")
    Sleep(1500)
    MouseClick("left", 405, 345, 1, 3)
    exit
    endif
    ExitLoop
    endif
    Sleep(10)
    wend

    ; Cast pole and start all over again.
    cast_pole()
    endfunc

    ; ##############################################################################
    func cast_pole()

    $RandomNum = Random(1000, 3000, 1)
    $start_time = TimerInit()
    Send($HotKey)
    Sleep($RandomNum)
    $CastAmt = $CastAmt + 1
    endfunc

    ; ##############################################################################
    func check_window()
    $dimensions = WinGetClientSize($win_title, "")
    if $dimensions[0] <> $screen_width or $dimensions[1] <> $screen_height then
    msg("Invalid window size. You must use " & $screen_width & "x" & $screen_height & " resolution in window mode.")
    Exit
    endif
    endfunc

    ; ##############################################################################
    func msg($text)
    MsgBox(0, $title, $text)
    endfunc

    ; ##############################################################################
    func msg_array($title, $array, $num_elements)
    dim $text
    $text = $array[0]

    for $j = 1 to $num_elements - 1
    $text = $text & ", " & $array[$j]
    next

    MsgBox(0, $title, $text)
    endfunc

    ; ##########################################################
    func request_end()
    $MB_YESNO = 4
    $MB_YES = 6

    if MsgBox($MB_YESNO, $title, "End script?") == $MB_YES then
    Exit
    endif
    endfunc

    ;###########################################################
    func Start_Bot()
    $MB_YESNO = 4
    $MB_YES = 6

    if MsgBox($MB_YESNO, $title, "Make sure you have done the following before you begin." & @CRLF & _
    @CRLF & "1: Face your character away from the sun or moon." & @CRLF & _
    "2: Set your character view to first person mode." & @CRLF & _
    "3: Adjust your horizon line so that it is" & @CRLF & _
    " approximately 2 inches from the top of the screen." & @CRLF & _
    "4: Equip your fishing pole." & @CRLF & @CRLF & @CRLF & _
    " Press Yes to continue." & @CRLF & _
    " Press No to exit.") == $MB_Yes then
    if MsgBox($MB_YESNO, $title, "Do you want to Run Setup?") == $MB_Yes then
    RunSetup()
    endif
    else
    Exit
    endif
    endfunc

    ; ##########################################################
    func drain_timer()
    Msg("Restart")
    $start_time = $start_time - $time_to_wait
    endfunc

    ; ##########################################################
    func choose_color()
    ;#########################################################
    ; This is the color used to pixelsearch for the bobber.
    ; Select a good color on the bobber that
    ; is prominent on the screen
    ;#########################################################


    Select
    Case $color_choice = 1
    $color_to_use = $1
    Case $color_choice = 2
    $color_to_use = $2
    Case $color_choice = 3
    $color_to_use = $3
    Case $color_choice = 4
    $color_to_use = $4
    Case $color_choice = 5
    $color_to_use = $5
    Case $color_choice = 6
    $color_to_use = $6
    Case $color_choice = 7
    $color_to_use = $7
    Case $color_choice = 8
    $color_to_use = $8
    Case $color_choice = 9
    $color_to_use = $9
    Case $color_choice = 10
    $color_to_use = $10
    Case $color_choice = 11
    $color_to_use = $11
    Case $color_choice = 12
    $color_to_use = $12
    Case $color_choice = 13
    $color_to_use = $13
    Case $color_choice = 14
    $color_to_use = $14
    Case $color_choice = 15
    $color_to_use = $15
    Case Else
    ErrorMsg()
    $color_to_use = $3
    $color_choice = 3
    EndSelect
    IniWrite("Settings.ini", "ColorChoice", "ColorChoice", " " & $color_choice)
    endfunc

    ; ##########################################################
    func RunSetup()
    $MB_YESNO = 4
    $MB_YES = 6

    $CatchAmount = InputBox($title, "How many items do you want the bot to find?" _
    & @CRLF & "Enter a value between 1 and 250", "" & $CatchAmount, "", 251, 244)
    If $CatchAmount >= 1 AND $CatchAmount <= 250 then
    IniWrite("Settings.ini", "CatchAmount", "CatchAmount", " " & $CatchAmount)
    Else
    ErrorMsg()
    IniWrite("Settings.ini", "CatchAmount", "CatchAmount", " 50")
    endif

    $HotKey = InputBox($title, "Enter which hotkey you use for casting your fishing pole." _
    & @CRLF & "Example: 1", "" & $HotKey, "", 251, 244)
    If $HotKey <> "" then
    IniWrite("Settings.ini", "HotKey", "HotKey", " " & $HotKey)
    Else
    $HotKey = 1
    ErrorMsg()
    IniWrite("Settings.ini", "HotKey", "HotKey", " 1")
    endif
    $color_choice = InputBox($title, "Enter a number for the color you wish to use." _
    & @CRLF & "1: Dark Purple" & @CRLF & "2: Dark Blue" & @CRLF & "3: Red" & @CRLF & _
    "4: Stormwind Daylight Blue" & @CRLF & "5: Stormwind Daylight Red" & @CRLF & _
    "6: Beige" & @CRLF & "7: Night Blue" & @CRLF & "8: Wailing Caverns" & @CRLF & _
    "9-15: Custom Colors", "" & $color_choice, "", 251, 244)
    choose_color()

    if MsgBox($MB_YESNO, $title, "Do you want to setup advanced settings?") == $MB_Yes then
    AdvancedSetup()
    endif
    endfunc

    ; ##########################################################
    func AdvancedSetup()

    $Bobber_Search_Tolerance = InputBox($title, "Enter tolerance value for the bobber?" _
    & @CRLF & "Value should be between 0 and 30", "" & $Bobber_Search_tolerance, "", 251, 244)
    If $Bobber_Search_Tolerance <> "" AND $Bobber_Search_Tolerance <= 30 then
    IniWrite("Settings.ini", "Bobber", "BobberSearchTolerance", " " & $Bobber_Search_tolerance)
    Else
    ErrorMsg()
    IniWrite("Settings.ini", "Bobber", "BobberSearchTolerance", " 20")
    endif

    $Bobber_Search_Step = InputBox($title, "Enter step value for the bobber?" _
    & @CRLF & "Value should be between 1 and 5", "" & $Bobber_Search_Step, "", 251, 244)
    If $Bobber_Search_Step >= 1 AND $Bobber_Search_Step <= 5 then
    IniWrite("Settings.ini", "Bobber", "BobberSearchStep", " " & $Bobber_Search_Step)
    Else
    ErrorMsg()
    IniWrite("Settings.ini", "Bobber", "BobberSearchStep", " 2")
    endif

    $splash_tolerance = InputBox($title, "Enter tolerance value for the splash?" _
    & @CRLF & "Value should be between 0 and 30", "" & $splash_tolerance, "", 251, 244)
    If $splash_tolerance <> "" AND $splash_tolerance <= 30 then
    IniWrite("Settings.ini", "Splash", "SplashTolerance", " " & $splash_tolerance)
    Else
    ErrorMsg()
    IniWrite("Settings.ini", "Splash", "SplashTolerance", " 20")
    endif

    $splash_search_step = InputBox($title, "Enter step value for the splash?" _
    & @CRLF & "Value should be between 1 and 5", "" & $splash_Search_step, "", 251, 244)
    If $splash_search_step >= 1 AND $splash_search_step <= 5 then
    IniWrite("Settings.ini", "Splash", "SplashSearchStep", " " & $splash_Search_step)
    Else
    ErrorMsg()
    IniWrite("Settings.ini", "Splash", "SplashSearchStep", " 1")
    endif
    endfunc

    ; ##########################################################
    func ErrorMsg()
    MsgBox(0, $title, "Incorrect value entered or the user pressed cancel. Default value will be used!")
    endfunc

    ; ##########################################################
    Last edited by KuRIoS; 05-12-2006 at 07:25 AM.

  15. #15
    testtest's Avatar Member
    Reputation
    2
    Join Date
    May 2006
    Posts
    18
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    fish bot

    Help.. i can't get it to work as i want. you see it doesn't "right click" to cauht the fish.. what shall i do..?

Page 1 of 3 123 LastLast

Similar Threads

  1. [Trading] World of Warcraft Honorbuddy bot trade for Diablo 3 bot ( DemonBuddy )
    By Trython in forum World of Warcraft Buy Sell Trade
    Replies: 0
    Last Post: 06-04-2013, 10:55 AM
  2. Fishing Bot for Mac
    By dogpie in forum WoW Bots Questions & Requests
    Replies: 3
    Last Post: 04-27-2011, 10:15 PM
  3. [Trading] WTT an EU World of Warcraft WoTLK account for SC2
    By Chrest in forum General MMO Buy Sell Trade
    Replies: 1
    Last Post: 08-14-2010, 10:38 AM
  4. world of warcraft free guides for lvling
    By crapshot in forum World of Warcraft Guides
    Replies: 3
    Last Post: 04-22-2008, 03:48 PM
  5. World of Warcraft WoW!Bot (GetALifeBot) 0.61 for WoW 1.9.4 + FishBot
    By Matt in forum World of Warcraft Bots and Programs
    Replies: 43
    Last Post: 04-18-2006, 04:55 AM
All times are GMT -5. The time now is 07:02 AM. Powered by vBulletin® Version 4.2.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved. User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search